This Basement Finishing Secret will Save you a FORTUNE! | Reality Renovision Ep04
ฝัง
- เผยแพร่เมื่อ 6 ส.ค. 2024
- If You Want A Blueprint For Creating a Low Cost Basement Living Area Then this video is for you! Finishing a basement Does mean you need a second mortgage. Here is my simple system! #RealityRenovision
Love watching Reality Renovision? Subscribe for new episodes or
Watch Season 1: • Complete Bathroom Gut ...
Series: Reality Renovision
Season 1 Episode 4 (2016/2017)
Master Episode #04 "The Most Economical Basement Technique"
🔨 SHOP TOOLS🔨
Level Set
geni.us/RRLevel
Laser Level
geni.us/RRLaserLevel
OLFA Utility Knife
geni.us/RRUtilityKnife
Tape Measure
geni.us/RRtapemeasure
DeWALT Drill Kit
geni.us/RRDrillKit
DIY Paint Kit
geni.us/RRPaintKit
Handy Paint Pail
geni.us/RRPaintPail
Great Stuff PRO Foam
geni.us/RRGreatStuff
Great Stuff Foam Dispensing Gun
geni.us/RRFoamGun
Produced by Jeff Thorman
Hosted by: Jeff Thorman
Written & Directed by: Maximilian Moskal
Filming / Editing: Moskal Multimedia
Intro Theme: Anthony Jarrett
Produced by: Home Renovision DIY 2017
Video & Editing Services Provided by:
Subdivision Films LTD.
www.SubdivisionFilms.com
Disclaimer:
Videos produced by Reality Renovision are provided for informational purposes only. All material provided within this website is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. The DIY instructions used here are used to simply breakdown projects to their simplest steps. Please use a clear mind and use all safety precautions while following the tutorials provided by this site. Reality Renovision does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing projects on their homes they are doing it at their own risk and Reality Renovision cannot be held liable if they cause any damage to their homes. With different codes around the world and constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said Reality Renovision cannot claim liability with all applicable laws, rules, codes and regulations for a project. Be safe, have fun renovating and ALWAYS stay informed with your local building code. - แนวปฏิบัติและการใช้ชีวิต
Watch the entire first season of Reality Renovision HERE: th-cam.com/video/07jLmvcqY90/w-d-xo.html
Are you able to tell me how to install a cold air return in the basement. I don't have one and my basement is already finished. Thanks!!
Excellent production quality. Up there with the big TV shows like This Old House... but even better than TV edutainment - more education, less entertainment! I will watch you guys forever
@@symone9301 @UCl-OPZ5B1xhXywEePIpssjg Hi I have the same question about cold air return, will you be able to help. thanks
We are going to paint ourselves. How do you get rid of drywall dust from gyproc?
Any specific sleeve better? We are using dark colors for media room, ceiling sleeve?
First time watching this channel, I gotta say, I like this guy
He's dope. Been watching him for years. Super chill and not over strict and purist about everything. He throws a bone to the cheap diy guy like me who might not have money to do it all perfect (like not having money for a full sub dimple system he talks about here)
Same here, subscribed
This is my first time as well and I just hit the subscribe button.:-)
@@migrain45 me too.
Watching him for years..i would say he is the best for explaining things
You're an excellent carpenter, love to watch the videos you come up with. please keep them coming, you've saved me a fortune!
Thanks, will do!
I love this channel whenever I have a question I always googled even if I hired someone for my work
I really thanks to him
10:53 Honest Truth 💪🏾🙌🏾🔥 Thank you Jeff, Loved the video!!
I watched many videos of this gentleman and I really like the way he explained it.
This show is better than any DIY show on television!
Thank you very much for making these videos. It is very educating from technical aspect and economical. I really appreciate your time and and effort for making these videos.
Glad you like them!
We’re renovating our basement now and your videos have been so valuable!
Cheers happy to help!
So informative and chill. I would love to have a consult and project done by you and your team!
Basement looks great...always good work..
Great tips.
The HVAC tip "reduce from 5" to 4" round duct to build up pressure to throw the air further" is inaccurate, and in fact your reduction in size will do the opposite. I design HVAC systems for a living. If you want more pressure you need a different fan or change the fan speed. Trying to push the air through a smaller duct and with a fitting will result in higher pressure drops, reducing airflow. The throw is a function of CFM and the design of the register. You are correct in dropping the heat supply down to the floor level. But I would not recommend reducing the duct size.
its also worth noting that 4 in duct is not a supply size really, i install ductwork and also am a residential and commercial hvac tech and 4 in duct proves such little cfm that its only used in like walk in closets to prevent mold or dead zones of air flow. 4 inch is a good exhaust size for bathroom fans ect.
Notice you got neither a heart nor a reply. I don't think he could handle you correcting him. Must have an ego
@@Integrity.is.everything or it's due to the age of the video
@@rivahkillah No. He's liked comments from WAAAAY after this person's comment. He just didn't like what he said
@@Integrity.is.everything - well, can you blame him? everyone is a claimed expert in the comments section
Nice and honest answer!! Thanks! I want to do my basement for space room for living but I don't know anything so how much if I would to hired someone to do it? Just a room not the whole basement.
We only wish we could hire your team to complete our basment... It looks easy but you never know what you can run into. Nice video!
Damn, Jeff. Looking fly with the sweater amigo
Good to know I installed the most economical flooring in my basement 15 years ago.
Speaking my language at 13:00!!! Thanks so much for these videos!
Cheers!
Great! and so Beautiful.
awesome info and work i wish you goodness
nice work, just subbed. What a difference before and after....
Love the updated videos!
Thank you Shawn. Cheers, Jeff
Cool! Good job!
That paint color! 😮
Excellent, subscribed.
Hey Jeff great videos you put out every time. Im a NOVICE looking to finish roughly 1000 sqft basement would appreciate whatever guidance you give as i have several quotes from contractors and its ridiculously expensive.
New to your channel. Your videos are fantastic. Thank you :)
Great tips
wow what a video ... do u know if its preferable to finish in carpet or lvp/laminate in terms of resale value? my house was built this year here in northern colorado and lots of homes around have carpet but i like the ease of clean with wood flooring.
I bought a home in New England from the 1940s I have a very dry basement I was thinking to renovating it this helps a lot
Oh a good video! "Oh no its this guy"
Awesome job explaining the renovation process. You’re cute too. Thank you
this episode is gold
I would say it's RED
Thank you bro
i'll say it… years have been good on you! :P
Hello Jeff I am looking for one of your tips for cutting a square hole in a basment wall for a vent. I seen it but cannot find it again could you point me in the right direction.
Thanks great vidios Donn.
I’m here for it
I’ve been building for over 30 years and have never seen joists spaced on 2’ centers that’s just crazy!
RE:Michael Maas. Even stranger than that, he said they were on 22" centers.
Awesome
6:24 My contractor used a cement saw to cut through the foundation. He said that using jack hammers could cause cracks in the foundation.
Kiln is one syllable. You're killin' me.
Hey what do you think of industrial look ceiling sprayed with paint, tx
Great video Jeff. Always a pleasure watching your detailed videos. By curiosity do you remember the height of that basement? I have a low ceiling basement (6'11), not sure how to go about it without spending a fortune. Thanks again.
Seems like sinking any money into that space would be a pretty big waste.
Wow he looks so young!! Too funny!!
Love your channel, is it worth upgrading to brushless for impact and drill? I have a 20v dewalt set that isn't brushless. Happy new year!
If its not broken, dont fix it.
Jeff, did I actually see you checking (a potentially crooked) 2x4 wall for straightness...with a (potentially crooked) 2x4? Love your videos.
I'm sure he sighted it for straightness, if you don't build that means looking down the side of the 2x4 with one eye like lining up rifle sights to see id it is perfectly straight, the eye is probably accurate to a 1/16".
What I learned from this video. Studs are beams, joists are beams, beams are also beams.
I just started watching this series? I have watched some of you're others and like what I have seen so far! I have subscribed, and try to remember to like the one's that I like ( witch is all that I have seen so far and good job with a thank you. I may do your paid version in the future but not today.) I have a wide range of exp. in const. but at this time no details. So the only comment I would like to make @ this point in your series is that I feel you should seal all the duct work that you can get access to and maybe do a simple type drawing of elec. cable, mech. things and so on if you are going to inclose it will help you remember and help future owners learn . I think that shows a good organized home owner. How many projects have you done that you may have been able to keep cost down knowing what lies behind ? OK maybe to much to just mention sealing and marking but YOU said to comment if it might help any of us DIY peeps. keep on making the great informative videos and I may just contribute some $ . Thank You Don S.
Cheers Donald!
@@REALITYRENOVISIONHi, I was pleasantly surprised to see your video. I am about to remodel my kitchen. I am in Montreal. If you are here, I will definitely ask you to take care of the decoration. I look forward to replying.
love your videos You have grown younger in this one LOL
Beautiful finished. Paint colors please?
Hey Jeff. You're my favourite DIY guy - and love that you're from Ottawa! In this video you say "10k" for cost ... I'm curious to know what you would say today during year 3 basically of covid times. Would you go as far as to say DOUBLE today?! It's May 1/22.
Jeff, I have a concrete basement, but I don't want to put up drywall everywhere. I would love to do wall paneling for a rustic look and paint the pipes and beams. I will need a few walls because I would like to put a gym and finish the plummed bathroom that already exists just not everywhere. I haven't been able to find anyone who has a video on such a thing. My basement is 1400+ square feet. Is this something you can advise me on? Any suggestions would be awesome.
In your opinion would it be cheaper for me to underpin (I only have about 6.5ft clearance) and finish my basement or make an addition. Our house it to small and we need to expand somewhere.
Looking at how you do the flooring is very cool and I've seen you do that in other videos. As someone that wants to do that in their basement, should I worry about framing the walls first or putting in the subfloor first? Should I be leveling the uneven concrete floor before putting in the subfloor, or try to level after? I'm very new at trying something like this.... CHEERS!!!
level the floor, put the subfloor first then walls on TOP of the subfloor. leave a subfloor gap between the concrete wall too. it needs air flow or it will get moldy under the floor, air gap or not. (air gap isn't much use if it's not moving anywhere).
Similar to the other response, subfloor first, then walls. I elected not to level the concrete first due to budget at the time, and have regretted it.
I would always put the floor right on the concrete! Besides moisture coming from underneath the floor, most homes have the water heater in basements and someday it may leak without you knowing it. I’ve seen people that have had to replace an entire wood floor in a basement just for a burst water heater.
Interesting
Good video!
Thank you! Cheers!
What is currently the best vinyl product for use for a concrete slab. We have no water or dampness, I think your content is some of the best on the internet.
Fill any cracks with concrete filler chaulk then Red Guard the slab. At that point its ready for tile or vinyl plank.
You mentioned that your head ducts should be extended to the floor. In theory, you are correct. However, furnaces have to work much harder to force the air downwards regardless of whether or not it's through a pipe or into an open room. Adding the extra ducting is useless. However, your cold air return should be extended to the floor so that it will pull the cold air out and the hot air down.
Are you sure about that?
Subscribed!!
More newer stuff to come!
NEVER DRYWALL A BASEMENT CEILING (I totally regret doing my basement ceiling with drywall, just do a tile drop ceiling, you WILL need access to that ceiling at some point)
wow...thank you for that tip
@@mariad4183 plus the drop ceiling tiles absorb lot of noise..drywall ceiling the noise bounces everywhere..i can't even be in my basement when there's more than a couple kids...gets too loud
@@K4R3N aawww... thank you so much. We're looking for options - especially for sound insulation. That's good to know 💕💕
@@mariad4183 there's a lot of videos on youtube..they are called "acoustic ceilings"
@@mariad4183 also please before you do any basement work check for RADON and get the radon fixed before any basement work.
Your awesome
I have existing ceramic tile in basement …rather than remove may I place vinyl flooring on top ?….your thoughts?
OMG JEFF You look so young haha. Loved the video keep it up :)
This was done 10 yrs ago. Don't worry we got more recent vids to come. Cheers Jeff
Hey Jeff quick question you mentioned bring heat to the floor. How hard is it for a DIYer to install two heating ducts down the wall?
Why is there vapor barrier on both sides of the wall insulation?
What is the name of the bathroom floor tile at 0:15 in the video? It looks great
*How do you design a basement to begin with that has least chance of building mold?*
Any recommendations for contractors in Michigan?
Water proof before doing anything. My old landlord had a beautiful basement but if flooded bad. Use drop ceiling because you need to wire different thing like home speakers.
I have a basement with water leaking in. How should I ho about fixing it.
I've got a bungalow in a pretty cold part of canada, where the temperature drops probably 6-7 degrees down here easily. Currently, it's laminate on concrete with a tiny thin sheet of something underneath. Would you suggest carpet, or vinyl? Recently added two heat runs and an air return to try and combat this issue.
for best results get a space heater and an insulated subfloor.
What are your thoughts on in floor heating in the basement vs ducted? Thanks!
love it. Cheers!
We have no insulation behind our drywall. It stays so nice in summer. I figure less issues.
don't need it if the foundation is already insulated from the outside either.
Would you recommend 1” rigid foam board between your dimple board and your 5/8” osb sheet subfloor?
No, It'a amazing how this floor system make the room warmer. If you want to insulate the floor, find a floor system with insulation in it. The dimples allow any moisture to make its way to a drain, in theory anyway.
In reality and honest truth is that you can finish a basement for less then $3,000 if you do the job yourself. Contractors usually charge per square foot, others charge per labor. 90% of the labor work is around $15k to $25k which is absurd when materials cost $3,000. When i finished my 1,008 sqrf basement in 2018 i was charge $8,000 from a Mexican contractor including materials waterproofing and installing brand new windows. Labor was $5,500 and materials that i purchased was $2,500+ tax
@Rocco im in the process of getting quotes from contractors, the prices im getting is ridiculous. 1000 sqft running into $45000 plus to finish it. Would like to connect with you maybe i can get some pointers
@Rocco Lucio, I would like to connect with you. I have 600 sq ft that I would like to finish.
@@praveenkoya1896 framing walls and adding electric are very easy skills to master even for a beginner DIYer. Most electric work will not involve any complex 3-way or 4-way circuits. Check TH-cam and some reference magazines, all the info will be there for basic work like this.
What's the plastic for? Lock in the moldy insulation?
Would love to hire you for my basement coming up.. let me know how to get in touch
Hey Jeff, on the heating topic for basements, would an underfloor warming system be advised or is there a reason why you shouldn't put a system like that in the basement?
If you're building new, in-floor radiant is an excellent choice. If you have the headroom to spare, and you've got an existing concrete floor, you can run your radiant, then overpour and achieve excellent results.
So adding that subfloor and then finished flooring would raise the floor by 1.5” maybe? What do you do about the stair riser on the last step now that it’s out of spec?
if you are doing a reno on a permit many inspectors will allow you some extra mercy if you just ask.
I dont like the foam though, after about 2 years it breaks down and turn to dust. I am ellergic to that form. Some is in my attic and I can feel some of the dust sometimes.
Saw the Timmes cup, where in Canada are you located?
I know it's not realistic for a lot of people but removing those lally columns with the help of an engineering firm can do wonders for opening the space up. Finished columns in a basement really suck and affect how the space can be used unless you're dealing with a lot of square footage.
Looking to finish a basement soon but curious how to get ideas for the layout of the finished space. Any suggestions other than hiring an architect?
work with what you got. moving mechanical costs a fortune. The return on investment is low so keep it simple.
Do you have to have a hallway in the basement?
i suck at carpet............good advise
Hi, thanks for your videos. I have accomplished many things with your help. I have one issue I can't figure out and hope you can lead me into the right direction.
My basement has a gap between it and the first floor of the house. How I call it. I thought it was cove joint. But it appears that is on the floor. Its about 1' high gap on the wall. From there comes out some pipes, the beam and ducts. I hope to seal it with concrete. I wonder if i could make slabs and glue it there. It has some insulation. I want to close it because I found out mice is coming in from there. Please help me fix it. I appreciate any insight.
What color is that , i like it
Hello, I have 1980s home. Starting a full basement remodeling, basically demoing everything to concrete walls. I plan to install subfloor. A part of the basement has vinyl glued to concrete. My gutters tells me I should get that out too to be level with the rest of the basement, but I am unsure what to do. What is recommended in this case? Thank you!
I wish you were in Ohio. I'm about to start a renovation and can't find anyone here in the Columbus area to help
I'm in Cleveland and home improvement prices are about double what they were a few years ago. Good luck.
Easy basement to finish. Most have more problems than this one. Couple years ago national average to finish a basement was about $95/sf.
That's gone up. The more walls, higher the cost. (Drywall, electrical, doors, baseboard, casings, doorknobs, every time you create a room.)
Many basements DO NOT have plumbing roughed in.
And most basements DO NOT lend themselves to a wood subfloor. And you CANNOT do 3/4" hardwood below grade. LVP is a much better choice, and quality LVP has been on the market 20+ years. This guy is a good framer, he's not a floor guy and is in error on some points there. DO NOT listen to him on flooring advice or pricing, he's WAY off on his advice.
No way you can do 800 sf for $10k. A simple renovation will run you probably $40,000 minimum if everything us in your favor.
are you opposed to keeping the floors concrete and finishing them somehow?
I hear good things about cork flooring for heat retention and durability. What do you think about cork flooring in a basement?
it is a start.
if you're DIY-ing it:
electrical is straightforward, just do your homework to keep it to code.
The tip: save yourself a ton of work and mess by installing the boxes AFTER you've hung the drywall.
You do this by
-leaving slack in the wire where you want a box to go; if multiple wires are involved, label them
-at this point, I like to position the drywall and cut the holes for the boxes BUT
-you can just hang the drywall, marking the box location, then come back after and do all the boxes at one time. You'll need to be cautious to not nick your wiring.
If you need more information I can provide it, but you likely get the idea.
I can not find a video on TH-cam or your channel for what I need to know. I have a ranch style home with walkout basement. Built in 1962 in Michigan Kent County area. I took out the wood paneling walls and shag carpet. But I don't know if I can install baseboard trim touching the cement? I used treated wood on the floor when I built the frame but I'm scared if I use mdf trimming cause it's not wood it will get water damage and soak up from the treated wood and concrete floor. What do i do? Also...the support wall straight down the center of the basement is a wood frame but it's sitting on a 5 or so inch concrete block wall that I can't attach the baseboard trim too cause it concrete sitting up as high as the trimming is .
You took out the wood paneling and shag carpet, but I assume your installing drywall walls. Your drywall will be above the floor level so it won't wick moisture. You didn't identify the flooring. Is it unsealed concrete or just a painted surface? If the floor is vinyl or laminate, the baseboard will be above it anyways. MDF against the concrete will wick moisture and have a short life. Well primed wood baseboards would be a better choice. The ultimate choice would be PVC baseboards, but also the most costly. Attaching baseboard where there is a 5" high curb can be accomplished with adhesives or you could Tapcon screw them, countersink and fill the heads.
Would you need 2x6 wall studs to run the 4" duct tubing in the wall?
Yup
Because 4" stud is actually 3 1/2"
So it will be so tight to be able to run it through it.
Drop ceiling. we did that in my basement. easy peasy.
Wow. Unbelievable. This is a house like in the Middle Ages.
Where I live we build basements with reinforced concrete, 50 cm structural bricks and interspaces below the floor and around the walls to prevent humidity from affecting the construction. It’s not cheap but it can last for generations.
Question for folks - we have a large finished basement (~ 1200 square feet). We had carpet/pad installed directly onto the concrete. Unfortunately our sump failed, and we had to tear that all out. I upgraded to a better sump and a backup, with a battery.
Now we're looking to tackle the floor. I'd previously considered carpet again, or maybe vinyl planks. However only recently did I become aware of subfloor options over the slab prior to installation of the floor covering.
How important is the subfloor? What sorts of chances am I taking putting my floor coverings back onto the slab as it was previously?
I run a dehumidifier in my basement year round, and it drains into the sump, so the humidity is well-managed.
I'm a union flooring installer, have been for 20 years now, and I don't recommend underlayment on slab, especially in a basement. Anybit of water will result in replacing your underlayment. Floating floor is a popular option.
@@Mtowndj81 Thanks Eddie. I came to a similar conclusion, and we ended up just putting down a moisture barrier and carpet.
Put down a glue down commercial carpet. They make some that are all man made material- nothing organic to promote mold growth. Also- if something floods you can just wet vac it up. NEVER use padding in a basement !!!! Dehumidifier also a great idea.
@@jamesjoslin7586 couldn't agree more.....NO PAD IN BASEMENTS!!!
@@jamesjoslin7586 damn I didn't know that was a thing. Unfortunately we've already replaced the carpeting (with pad).
We have the sump and a backup. I've also thought about buying a manual pump, so that if both sumps fail, I can manually remove water from the basement.
He has this another channel.. I was subscribed to his main channel diy things and didn't know this also is his channel
What qualities should you look for before purchasing LVP flooring? No idea what to look for.
It all depends what your substrate and personal requirements are. Are you looking for something that's really high quality or just something that's cheap but waterproof? Are you on concrete or on wood subfloor? There are a lot of products out there and they just keep getting better every year. I found that planks that are smaller tend to come apart much easier. Most new products are very large planks, which work great and have less joints. Also the texture on the actual plank is something to look out for as well. Some of the older ones are super slippery and can be dangerous. Look out for texture because it makes a bigger difference. The joints, I find glue is too old school, the locking planks works really well. Theyre all a little different but work on the same principal. Look for thickness, if you take a piece out of a box and hold it on by the end, does it bend a lot? Thinner products dont perform as well. next do they have a solid core only or do they have a soft layer underneath as well? If it's just a solid core you should really put down under pad. I've put down solid core flooring with no pad and it's like walking on concrete, little high impact. Another important point is, take your keys and run them down the plank: does it scratch easy? If yes, dont buy it. You want something durable. Anyways, I am no expect, just a guy who has experimented a lot with vinyl flooring. Personally I really like the life proof brand at home depot. It's 3.50 Canadian a square foot I believe (may be different where you are) but it's great stuff. I put some under-pad down, then the flooring (you dont have to but it is quieter to walk on and more comfortable) and the result is great. That flooring has a hard core and a soft bottom. If your looking for something else we have a video coming out on our other channel Home Renovision DIY in a couple weeks, may be worth waiting to see that. Good luck and Merry Christmas!
This is a common problem. I have sourced out a great product and will be installing it and making it available for purchase in a few weeks on our other channel. Home Renovision DIY
@@SubdivisionAuto So much to consider before buying. Application,substrate,texture,width,thickness. Thanks for the info. Every little bit helps.
@@willymaes Indeed. Dont be afraid to open some boxes and really look over the product. Find that works for you, what you like. What works for me may not be what your looking for and vice versa. Regardless what you choose, i doubt you will be dissapointed with vinyl flooring, its great stuff. Merry Christmas and happy holidays
This looks like an older video I take it, unless you've discovered the fountain of youth. Not sure how much building technology has changed but is there any value in doing a floor out of wood and/or laminate anymore? What time of flooring was that? In wet spaces is there a better option that you would recommend now or would you still do it this way?
If you start watching at 07:31 , he answers your question in this video.
Today I would use vinyl plank. Cheers!
Paint on the side if the outlet cover. Lazy painting. Just take your covers off before painting. Always. It take 10 seconds.
I was thinking the same thing. That paint job is terrible!!