Who thinks it will start? Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot! Check out my Instagram: 2_vintage_ Thank you for all the support!
Not this video it's not reving out due to the fact rimming is off two screws turn magnito one way a little at a time till you get it you had it running
please look up "Heat shrink solder butt connectors" no more soldering all you use is a heat gun or touch and they are weather proof as well its perfect for what you need
Try this: 1. Check for spark. One kick is ample. 2. Order new gasket set, seals and bearings. 3. Remove engine from frame and get it on the bench. 4. Completely strip and inspect, clean and replace all seals, bearings and any broken or worn-out parts. Oil seals are simply not designed to last 3 decades! 5. Reassemble. 6. Put engine back in frame 7. Check timing with a dial gauge using timing degrees off the internet. 8. Clean carb and replace all jets making sure you have the right sizes. They cost pennies. Never run a 2 stroke without an air filter. Honest mate, it's a lot more satisfying and less time-consuming than endless fault-finding and troubleshooting. 😀👍
I love seeing you go back to the roots of what me and a friend of mine were doing 25 years ago. Digging up barn bikes and riding the shit out of them if they’d run until they blew up
That's a '79. Check the reed valves for your bogging problem, they're probably not fluttering like they should after sitting for so long. Congrats on getting it started. (Oops, spoiler alert!!)
*Watching You is like making my dream come true. I'd love to buy Old dirt bikes and fix them up to bring them to their glory days. One day I'd love to fix some up. Keep up your amazing and inspiring content.* ☺
Save up and buy one! There are deals out there if you're quick enough I see running bikes for 700 bucks that are ugly all the time. Seat cover, spray paint and send it
When I was about 11 I bought a xr75 from a guy for $20 and some fake Oakley sun glasses. It didn't run, but I worked on it until I got it running. A few months later it caught fire from a backfire and homemade intake tube (a bicycle innertube) letting the fire out to where the carb leaked. I would fill the carb bowl and shut off the gas cause it leaked. One day I'm riding it with my friend and it ran out of gas. A construction worker filled the tank for me, and I headed off for the house about 3 or 4 mins away. I got to my yard and was hoping to get the gas shut off before anything bad happened bit it was too late, and being it had a whole tank of gas continuously leaking from the carb it was hard to put out. So I got rid of that and bought for $20 dollers! A 86 kx 80! It didn't have a cdi, so I put one from a older Suzuki model I can't remember what model but it was a 2stroke 80cc, and wouldn't you know it it fired up! I can't remember now why... but the throttle would get stuck open so We put a thick string around the sparkplug boot, too yank it off the plug when it would happen! It happened to me a few times! 😆 But boy did I love working on those things! I was 10-13 so didn't have any money but I could rig it up with superglue and duct tape! Great video man! I think it time to find me a used fixer upper dirt bike! Keep up the great work!
Kids don’t do that kind of stuff anymore It’s all video games and junk My oldest is 25 now I had him riding bikes and Atv at 4 yo and helping me work on them Now my young one likes bikes and quads but he’s not into it like the older one It’s crazy how that happens and he’s been around them cause I ride and work on my own stuff He’s getting more enthused as he’s getting some older When I was a kids we was lucky to have a bike to ride I had a Suzuki jr50 and wore it out then a Honda trail 70 it looked funny but it was fun to ride lol
Use flux when soldering and heat the wire, then add the solder. Let the solder flow into the joint, It's not paint. To prevent the heatshrink shrinking, put it on the longer piece of wire so it's further away from the heat. Gonna be a nice bike when you are done.
@@shaynedonnelly374 I thought I would mention it several times to express the importance of 2 stroke timing because you probably know how easy 4 strokes are to time. You can’t time a 2 stroke properly just by sight or else disaster looms.
when you're soldering, you should heat the wires up and let the solder flow into the wires rather than putting a layer on. They'll hold much better if the solder works its way into the wire
Thanks for the videos. I love this kinda stuff and have learned allot from checking out your videos. I Bought an 86 Suzuki dr100 this spring that didn't run and got it running. Didn't take much. More TLC than anything. I'd like to restore it but parts are extremely hard to find at a reasonable price.
One little tip. I notice in a lot of your videos that you give it throttle as you kick the bike over. This often makes it harder to start the bike. It's normally easier to get it to fire and then if it fires, THEN give it gas if it needs it.
its your air fuel mix you need to restrict some air coming in an air filter might do the trick!!!! has happpened to me with 2 stroke bikes all the time
That's what I was thinking, messing with everything but putting an air cleaner on it. Just ramming unmetered or unrestricted air to it. Like ah fix that prolly rev out.
I've hesitated in the past to correct your starting procedure on two strokes. Do not twist the throttle with the enrichment knob pulled out. It's not a choke......it's an enrichment circuit that only functions properly with the throttle position at idle.
A lot of snowmobiles have enrichment levers with 2 positions. Thank you for pointing out this crucial detail. It is too easy to make that mistake. It is NOT a choke…!
Rm 250 on the trailer looks like a '77 or early '78 model. Your Rm125 uses two intake systems piston port low end, then 'case reed' (you've not checked the reeds or reed lands yet) opens up for mid/top end. The cdi and correct stator part no.s can be identified from incisive googling presuming the part no. is still legible on your cdi. I think you can buy complete ignition and Boyesen (rad valve?) reed systems both cheaper then stock even if you can find them.
Hey great video here’s a little tip if it’s running kind of crappy that little tab on the bottom of the carb comes in contact with the motor and foams up the gas so grind it down a few milameters so it’s not touching it
@@nickgibboni8469 so that little tab touches the bottom end and all the vibration goes through the tab and makes the gas foam and get air bubbles so it gets more air then fuel and makes it idle higher
Do yourself a favor and order a dial gauge indicator while your at it. They’re like $50. They are a necessity. Once you’ve used one, you’ll see what I mean. There’s nothing like a properly timed bike.
Careful with timing.....to low it will bog out.....to high it will burn a hole right thru the top of the piston......happened to me twice on wiseco new builts......cost me 2 pistons before getting it timed right.
Start with the fundamentals. check compression, do a leak down test if you know how. Leak down will tell you if the main seals leak or you have a gasket leak. use a new plug and check the color of the spark. Light blue is optimal. check the reeds. check the timing. and use some good gas. You cleaned the carb and the pipe isnt the issue unless its crushed.Check the jetting specs too never assume the jetting is correct. Could be a way big main jet with high float level..
I have to do the crank seal on my 01 CR125. If you let it sit for a while it starts out super rich and smokes like crazy and then evens out. It's gotten real bad where it has a constant rich condition no matter how much you lean it out. Replacing it this weekend.
Such a satasfying video. Just found your channel and joining your community. I support all 2 wheeled content creators like us. Keep riding, keep happy! Excited to see what you post next.
Yeah that CDI and stater definitely looks like the one I had on my 79 arm 250 and I had my stater go out on my RM 250 well half of it and I had to replace it it would idle but soon as you touch the throttle it would die and it also would run hot just at idle but once I replace the stater ran like a champ
My first full size motocrosser. It was a great bike. In its time it was state of the art. The RM’s and YZ’s were head and shoulders the two best motocross lineups back then.
Thats a rocket ship when running, if the carb is correct and it won't rev high it will be the high revs coil failing in the stator assembly. Had exactly the same problem back in the day on the exact same machine!
Just so you know the C. D. I is built into the coil on this. The coil has the cdi in the coil .so if the stator wires run too the ignition coil and you have spark you do not need too add a C. D. I to the bike .
Should have loosened the screws on the stator to where it's held in place. But you can still turn it. Start the engine. Very slowly turn the stator changing the timing. Possibly the timing marks on the 250 are in a slightly different spot. There's not enough difference between the two bikes that it should matter. You've got spark. The only other thing the cdi controls is the timing curve. That should be about the same on either. If timed right has to work
Kids ride mx bikes on road that bikes stolen kid's fixing a bike with no frame or engine numbers that bikes good glad to see you fixing it every one trying to tell him wot I'd probably wrong no one ask where the numbers gone or why
It doesn't sound like a timing issue to me or the seals either, it's fueling problem. If it was timing it wouldn't idle like it does, if it was seals it would be hard to start and probably smoke a lot. I would try an air filter and but the mixture screw to factory and go from there as a start.
@@shotgunz124 Wrong, yes you could 'electronically' delay the ignition timing by modding but not advance without moving the trigger coil or magnets. CDI or capacitor discharge ignition charges the caps internally and releases its charge when the flywheel passes the trigger coil, it's as simple as that.
I had a blaster that kept throwing me through a loop couldn't figure it out doing the same thing. Ended up being the crank seal. Looked like the ppl that owned it before could not get the cab to stop leaking from the bowl so they PLUGED the drain on it lol 🤦 filled the motor full of fuel and blew out all the seals on it.
Want to know how I know this? I had a early 2000s Yamaha v Star Silverado classic edition are in the engine without the air filter to see if it would run it didn't rev up it would stall and die it would idle fine as soon as you hit the throttle it died so I put the air filter element back on in the air filter cover and it was like a new machine reved up smoother than hell
By the condition of that carb It's a carb issue. Not getting enough fuel. Your idle circuit is working but secondary circuit is not. Try spraying fuel in the carb at WOT and that will tell you for sure. This test will also rule out reed problems. Easy peasy!
The 80s to about 96 was all good bikes especially race bikes They all had plastic tanks by then and fenders no more metal stuff and twin shocks lol I had a buddy had a 85 kx 60 and man that bike was mean
Without the air filter it would not create enough suction and vacuum on the carburetors to suck the fuel into the intake could be your issue on that RM 125
It is the same way with some older polaris atv's . If you don't have the filter and airbox lid on, it will idle fine but bogs down on throttle. Put them on and runs like a champ!
Personally I would never run an engine especially two-stroke like that without an air filter doesn't take much to screw up that piston one little piece of dirt and it's done I can't justify running an engine without an air filter
Who thinks it will start?
Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot!
Check out my Instagram: 2_vintage_
Thank you for all the support!
Timing is retarded real slow to climb. Defiantly put an air filter on might need back pressure
Not this video it's not reving out due to the fact rimming is off two screws turn magnito one way a little at a time till you get it you had it running
please look up "Heat shrink solder butt connectors" no more soldering all you use is a heat gun or touch and they are weather proof as well its perfect for what you need
Reed Valve!
I think it's firin after tdc
Try this:
1. Check for spark. One kick is ample.
2. Order new gasket set, seals and bearings.
3. Remove engine from frame and get it on the bench.
4. Completely strip and inspect, clean and replace all seals, bearings and any broken or worn-out parts. Oil seals are simply not designed to last 3 decades!
5. Reassemble.
6. Put engine back in frame
7. Check timing with a dial gauge using timing degrees off the internet.
8. Clean carb and replace all jets making sure you have the right sizes. They cost pennies. Never run a 2 stroke without an air filter.
Honest mate, it's a lot more satisfying and less time-consuming than endless fault-finding and troubleshooting.
😀👍
nah man that is to much :)
Try reeds as well
Sometimes you gotta burn down the village to save it. You are totally right about this.
makes for a boring video tho
If you hold the soldering iron on the wire while applying the solder, it will flow into the splice a lot easier. 👍🏻
Ya! That way your just painting it on top of the wires. Let the copper wire melt the solder, not the gun. =) Great vid thank you!
...exactly!
It’s a two-stroke Derek, being over filled on oil cannot affect how the boat runs the crank case is completely sealed off from the Engine cylinder
I mean it could drag out the clutch right? Definitely something you don’t wanna do
and he put 10w40 in the gearbox
@@catfish_lude thats the right oil for what i know all rm´s
obviously its the motor mounts xd
It's a motorbike Derek... not a boat Dave...
Line up the lines and your in time . 1979 RM 400 rider ! Bought it new in 79 ! Still have it and a 1980 . Best motocrosser in the day .
I love seeing you go back to the roots of what me and a friend of mine were doing 25 years ago. Digging up barn bikes and riding the shit out of them if they’d run until they blew up
I just wrote a comment about me and a friend doing the same thing! Happy times back then! I think I'm gonna buy a fixer-uper!
Yes it will start , first bike I had was a 1979 rm 125 she was beautiful I am 53 years I WANT one again 👍😆
That's a '79. Check the reed valves for your bogging problem, they're probably not fluttering like they should after sitting for so long. Congrats on getting it started. (Oops, spoiler alert!!)
i just had the same issue on a pw80 that im working on. I put some boyseen reeds in it and it runs much better now
I didn’t think about that. It could be the problem
Bruh who adds a spoiler alert AFTER they put the spoil
Shut up millennial
Reeds after all those years should replace anyway.
*Watching You is like making my dream come true. I'd love to buy Old dirt bikes and fix them up to bring them to their glory days. One day I'd love to fix some up. Keep up your amazing and inspiring content.* ☺
Same
Save up and buy one! There are deals out there if you're quick enough I see running bikes for 700 bucks that are ugly all the time. Seat cover, spray paint and send it
This was my first bike here in new zealand, soo cool to see one coming back to life
I was really looking forward to this video man, thanks a bunch for uploading it.
He has had like almost everybody even the holy grail KTM 500 from like 1994 or something they’re all white
If it was a crank seal the bike would be smoking a lot more than what it is. Most likely it’s your carburetor settings or the timing is slightly off
It’s a two stroke.
@@carterwellman413 Which still has ignition timing...
Probably oil mixture, smoking means it’s working though so good.
It doesn't sound like you have a spark issue. It's acting exactly like the choke is on.
When I was about 11 I bought a xr75 from a guy for $20 and some fake Oakley sun glasses. It didn't run, but I worked on it until I got it running. A few months later it caught fire from a backfire and homemade intake tube (a bicycle innertube) letting the fire out to where the carb leaked. I would fill the carb bowl and shut off the gas cause it leaked. One day I'm riding it with my friend and it ran out of gas. A construction worker filled the tank for me, and I headed off for the house about 3 or 4 mins away. I got to my yard and was hoping to get the gas shut off before anything bad happened bit it was too late, and being it had a whole tank of gas continuously leaking from the carb it was hard to put out. So I got rid of that and bought for $20 dollers! A 86 kx 80! It didn't have a cdi, so I put one from a older Suzuki model I can't remember what model but it was a 2stroke 80cc, and wouldn't you know it it fired up! I can't remember now why... but the throttle would get stuck open so We put a thick string around the sparkplug boot, too yank it off the plug when it would happen! It happened to me a few times! 😆 But boy did I love working on those things! I was 10-13 so didn't have any money but I could rig it up with superglue and duct tape! Great video man! I think it time to find me a used fixer upper dirt bike! Keep up the great work!
Kids don’t do that kind of stuff anymore It’s all video games and junk My oldest is 25 now I had him riding bikes and Atv at 4 yo and helping me work on them Now my young one likes bikes and quads but he’s not into it like the older one It’s crazy how that happens and he’s been around them cause I ride and work on my own stuff He’s getting more enthused as he’s getting some older When I was a kids we was lucky to have a bike to ride I had a Suzuki jr50 and wore it out then a Honda trail 70 it looked funny but it was fun to ride lol
Use flux when soldering and heat the wire, then add the solder. Let the solder flow into the joint, It's not paint.
To prevent the heatshrink shrinking, put it on the longer piece of wire so it's further away from the heat.
Gonna be a nice bike when you are done.
You should start using a dial gauge indicator for timing. If it is advanced at all, you can put a hole in the piston.
Great advice but wasted comment he never listens and never learns
@@shaynedonnelly374 I thought I would mention it several times to express the importance of 2 stroke timing because you probably know how easy 4 strokes are to time. You can’t time a 2 stroke properly just by sight or else disaster looms.
when you're soldering, you should heat the wires up and let the solder flow into the wires rather than putting a layer on. They'll hold much better if the solder works its way into the wire
Cdi is everything without the right one it wont have the right firing order or sequence hope ya get it brother love the vintage bikes
I bought a brand new 1976 rm 125. Top of the line back then. 6 speed gearbox. It was top of the line, then.
Cant get enough of vintage bikes. Love em
Thanks for the videos. I love this kinda stuff and have learned allot from checking out your videos. I Bought an 86 Suzuki dr100 this spring that didn't run and got it running. Didn't take much. More TLC than anything. I'd like to restore it but parts are extremely hard to find at a reasonable price.
One little tip. I notice in a lot of your videos that you give it throttle as you kick the bike over. This often makes it harder to start the bike. It's normally easier to get it to fire and then if it fires, THEN give it gas if it needs it.
Man, I dig your channel. Love getting into the details with you. Used to really enjoy working on my bike with my dad, brings back great memories.
Nice fix but I can't stop drooling over that 350x in the background ✌
Awesome! I owned and rebuilt one of those many years ago! Powerband was insane, when it hits just hold on!
Yes an absolute rocket ship if memory serves me
its your air fuel mix you need to restrict some air coming in an air filter might do the trick!!!! has happpened to me with 2 stroke bikes all the time
That's what I was thinking, messing with everything but putting an air cleaner on it. Just ramming unmetered or unrestricted air to it. Like ah fix that prolly rev out.
cannot believe how lucky u are getting them bikes.happy for u.u do an amzing video all of the videos are really thorough as u explain properly
1979 I definitely think it’s a 79 thanks for your great videos they are all excellent 🤘☘️🇺🇸
Before I watch ,I have full faith in you getting the RM going 👍👍
Spray startingfuild around head and cylinder while running see if it revs up. Gaskets could be blown. Could be e plug
i believe he did that. 29:35.
I can’t wait to get mine up and running!!
New plug I would before anything
I've hesitated in the past to correct your starting procedure on two strokes. Do not twist the throttle with the enrichment knob pulled out. It's not a choke......it's an enrichment circuit that only functions properly with the throttle position at idle.
A lot of snowmobiles have enrichment levers with 2 positions. Thank you for pointing out this crucial detail. It is too easy to make that mistake. It is NOT a choke…!
Rm 250 on the trailer looks like a '77 or early '78 model. Your Rm125 uses two intake systems piston port low end, then 'case reed' (you've not checked the reeds or reed lands yet) opens up for mid/top end. The cdi and correct stator part no.s can be identified from incisive googling presuming the part no. is still legible on your cdi. I think you can buy complete ignition and Boyesen (rad valve?) reed systems both cheaper then stock even if you can find them.
I wonder if the timing needs to be advanced a couple degrees. Great job on this project! From rust to riches!!
That little trick with the air chisel was genius.
I miss my 82 rm, was a great bike
Ok that makes sense if your using the wrong parts. I look forward to you riding it!
He'll ride it but it will run like trash and he'll say it's minty lol.
You need to check those reeds out and check the carb sounds like not enough fuel or broken reeds
that guy was smart. he made you buy both bikes for the parts for the 125.
Hey great video here’s a little tip if it’s running kind of crappy that little tab on the bottom of the carb comes in contact with the motor and foams up the gas so grind it down a few milameters so it’s not touching it
could you explain more? haven't heard of this
@@nickgibboni8469 so that little tab touches the bottom end and all the vibration goes through the tab and makes the gas foam and get air bubbles so it gets more air then fuel and makes it idle higher
Do yourself a favor and order a dial gauge indicator while your at it. They’re like $50. They are a necessity. Once you’ve used one, you’ll see what I mean. There’s nothing like a properly timed bike.
Careful with timing.....to low it will bog out.....to high it will burn a hole right thru the top of the piston......happened to me twice on wiseco new builts......cost me 2 pistons before getting it timed right.
Really hope you can figure it out. You're probably right about the CDI and I wonder if changing the timing would help with the 250 stator and CDI?
Start with the fundamentals. check compression, do a leak down test if you know how. Leak down will tell you if the main seals leak or you have a gasket leak. use a new plug and check the color of the spark. Light blue is optimal. check the reeds. check the timing. and use some good gas. You cleaned the carb and the pipe isnt the issue unless its crushed.Check the jetting specs too never assume the jetting is correct. Could be a way big main jet with high float level..
Can't wait for diagnosis I was saying main jet if not standard. Or wrong stator
I have to do the crank seal on my 01 CR125. If you let it sit for a while it starts out super rich and smokes like crazy and then evens out. It's gotten real bad where it has a constant rich condition no matter how much you lean it out. Replacing it this weekend.
This bike has done very little ,you found a really tidy bike 1979.I had 78 many years ago first thing I rode with power band!! Happy days 👍
Such a satasfying video. Just found your channel and joining your community. I support all 2 wheeled content creators like us. Keep riding, keep happy! Excited to see what you post next.
Yeah that CDI and stater definitely looks like the one I had on my 79 arm 250 and I had my stater go out on my RM 250 well half of it and I had to replace it it would idle but soon as you touch the throttle it would die and it also would run hot just at idle but once I replace the stater ran like a champ
My first full size motocrosser. It was a great bike. In its time it was state of the art. The RM’s and YZ’s were head and shoulders the two best motocross lineups back then.
Thats a rocket ship when running, if the carb is correct and it won't rev high it will be the high revs coil failing in the stator assembly. Had exactly the same problem back in the day on the exact same machine!
May need an air filter to help with vacuum
Totally correct you need the right CDI unit for that yr of bike, they were a big prob bk then..
My first bike wuz a '80 RM80! had her for like 16 years till she died onna logging road somewhere. Energy can't be destroyed
u can solder the end back on the throttle cable joe
Definitely a 1979 - the 1980 had a smaller rear fender, and the 1978 has a different gas tank
do you think the reeds could be froze up or too stiff???
I read another comment about the reeds and I think that’s the problem, just not gettin enough fuel air mixture
Took my jug to a shop yesterday and have to get it bored to the next size bigger!! Have it back in a week or so!
It’s FOR SURE THE STATOR TIMING
Brilliant looking forward to this 👍
If you do suspect the air filter 30 or $40 air filters a lot cheaper than an engine rebuild just swap the dang thing out with a new one
Got that hoagie runnin!! 🍋🔥
Was that fuel pissing everywhere when it came off the stand? 😆😆
And sounds like it's bogging from too much fuel but could be the choke 👀
I am from Sheboygan Wi. My dads first dirtbike was a 1979 Suzuki rm125. I will buy this off of you when you’re done with it
Is that petcock valve on backwards?
Nope
Just so you know the C. D. I is built into the coil on this. The coil has the cdi in the coil .so if the stator wires run too the ignition coil and you have spark you do not need too add a C. D. I to the bike .
Definitely a 79 from the chain tensioners and roller on the swing arm 80 has a different bottom chain guide
Try a air filter and or advance the timing possibly
Its sat for a very long time it may just need running for a while to get the seals hot enough to seal the engine up good.
Love this bike!
It is old oil in the carb i had the same problem with my rm80
Should have loosened the screws on the stator to where it's held in place. But you can still turn it. Start the engine. Very slowly turn the stator changing the timing. Possibly the timing marks on the 250 are in a slightly different spot. There's not enough difference between the two bikes that it should matter. You've got spark. The only other thing the cdi controls is the timing curve. That should be about the same on either. If timed right has to work
Kids ride mx bikes on road that bikes stolen kid's fixing a bike with no frame or engine numbers that bikes good glad to see you fixing it every one trying to tell him wot I'd probably wrong no one ask where the numbers gone or why
Had the same bike and same problem. In my case it was the reed valve. Debris got stuck in them. Check your reeds!!
Any luck on finding some land ,the land I went to see sold the same day ,still looking
Great videos Joe, love it, looks like she might be time for a new pair of work shorts eh? I mean your on TH-cam so try n look presentable lol
It doesn't sound like a timing issue to me or the seals either, it's fueling problem. If it was timing it wouldn't idle like it does, if it was seals it would be hard to start and probably smoke a lot. I would try an air filter and but the mixture screw to factory and go from there as a start.
That’s incorrect it will idle just fine when u raise the rpm it’s supposed to advance the timing to rev up that what the Cdi does
@@shotgunz124 Wrong, yes you could 'electronically' delay the ignition timing by modding but not advance without moving the trigger coil or magnets. CDI or capacitor discharge ignition charges the caps internally and releases its charge when the flywheel passes the trigger coil, it's as simple as that.
I had a blaster that kept throwing me through a loop couldn't figure it out doing the same thing. Ended up being the crank seal. Looked like the ppl that owned it before could not get the cab to stop leaking from the bowl so they PLUGED the drain on it lol 🤦 filled the motor full of fuel and blew out all the seals on it.
Im going to have to go with, it’s the float level in the carb. Just my opinion.
Want to know how I know this? I had a early 2000s Yamaha v Star Silverado classic edition are in the engine without the air filter to see if it would run it didn't rev up it would stall and die it would idle fine as soon as you hit the throttle it died so I put the air filter element back on in the air filter cover and it was like a new machine reved up smoother than hell
like you said it starts and the carb is working. found the seat. are you going to put the CDI in the toaster.
I miss those old thick seats. The new seats on dual sports and mx just suck!
By the condition of that carb It's a carb issue. Not getting enough fuel. Your idle circuit is working but secondary circuit is not. Try spraying fuel in the carb at WOT and that will tell you for sure. This test will also rule out reed problems. Easy peasy!
Love to see the new finds, you're doing awesome man. Props to you! No sponsor from good ol' dubya d40 yet eh? Lol
Make sure your putting a washer under the main jet!!
Also check the main jet size...
Alot of older bikes have the year stamped into the head tube
Must be hot if they scratched the Vin off
And I've wired up different cdi boxes they all work..
If the rh crankshaft seal was bad it should pull the oil out crank case and burn it that's what happened to my cub banshee a few years ago
put a airl filter it is taking too much air and bogs down
yea, I have several friends with Suzuki 125 's of that vintage and it is not uncommon for the cdi box to go out, It acts just like that too.
could it be wrong jets in the carb?
I hated my 79 RM125. Bought a 86 KTM MX125. Big difference.
Wow esta fue la primera moto que manejé en mi vida y después nadie me bajaría de una.
Those old ' zooks have really nice lines to them, good looking bikes.
Another vintage cycle rises again! Yeah!
It came from the 70' s .....
The 80s to about 96 was all good bikes especially race bikes They all had plastic tanks by then and fenders no more metal stuff and twin shocks lol I had a buddy had a 85 kx 60 and man that bike was mean
thank you also for bringing me back in time
Did you check air/fuel screw on carb
Without the air filter it would not create enough suction and vacuum on the carburetors to suck the fuel into the intake could be your issue on that RM 125
It is the same way with some older polaris atv's . If you don't have the filter and airbox lid on, it will idle fine but bogs down on throttle. Put them on and runs like a champ!
@@Pajack exactly
Personally I would never run an engine especially two-stroke like that without an air filter doesn't take much to screw up that piston one little piece of dirt and it's done I can't justify running an engine without an air filter
Lots of guys with their race mopeds and what not run their carbs with nothin on the end of them, then again their only on the streets not trails
@@calebwinterbottom196 Agreed
@@calebwinterbottom196 they probably jet those carburetors so that they run a little richer like a snowmobile
@@daryleduardo7055 definitely, wheelie machines haha
You don't know what your talking about. I bet you don't even have a bike.