There's just really better options out there at the moment, so long as you're willing to take a bit more time settings things up. Also, at the time of recording this video the technology was still pretty new, so some changes may have been made since.
I had the same issue that Wi-Fi box is trash it got bricked the first day I got it and I had to send it back for a new one and they wouldn’t do a replacement for the item and I needed it badly because there wasn’t anything else I could find to slice from my iphone because I currently don’t have a laptop or computer device.
Oh, that's rough. Some libraries/schools offer 3d printing services. You might be able to slice your files there??? I'm not sure if that's something which is feasible within your specific country.
I did not find a feature like that during my testing. While it might be added in the future, it'll be limited to machines which have such an ability to begin with. Many of the Ender machines require that the power button be physically turned off in order to work.
@@Yarkspiri i ordered a smart plug instead.. I can webcam with a very old android phone to check if print is over. And online close the plug after it finishes.. In the emergency can directly also cut if i am not there.
I wasn't able to test that feature since on the model I received I wasn't able to connect within the app. Even with support help at the time, I wasn't able to get it working. Someone else mentioned that there are new features now active, so I'll try again and post an update if I do get to work correctly.
Hello ! I do not want to work with Creality wifi box with skr mini v2.0 board. and with the new android. I set this board because my Ender 3 was running quietly. help to understand. how to make work
Unless you actually connect it to your printer, you shouldn't have to. Only a couple of printers have this integrated, and I'm working in a video to bypass that as we speak. You should be able to simply transfer your files to your motherboard through SD card or micro SD as per usual. Most SKR Mini V2.0 boards still have the SD card slot (normally labelled SD-M).
When testing this device, I tested another cable connection + another router during my troubleshooting steps. Unfortunately, these didn't resolve the issue at hand.
A combination of a raspberry pie with octoprint and any compatible camera. There's an online list of compatible cameras that have been added for Gphoto. I used that setup while doing some contract work and although it was confusing at first to learn (I didn't know anything about Linux at the time) it was well worth the effort.
Unfortunately, I wasn't able to test that feature. I was unable to connect to the device to the cloud, therefore most of the features weren't activated. If I can ever get it working, I'll do a follow-up video.
Since this video, Creality has released the source code, and it's also now compatible with Klipper. So if you're willing to tinker with it, you might want this option. However, I'm still getting reports that there are issues with this device, so I'm currently unsure where is stands.
Significant changes were made with the firmware, so it's possible that many of the initial issues were fixed since then, however I still haven't been able to connect to this device, so it may depend on your own connection.
It was so bad I decided to make a follow-up video telling companies what features me and others might be looking for. Hopefully the companies take a good long look at it before we see something else come out.
At the time of making this video, the price was quite a bit lower. But due to the shortages and people mining, the price has gone up quite a bit. However, there's now a new option which is still affordable. You can get the raspberry Pi Zero 2W which others have been able to use for this same purpose.
@@Yarkspiri Thank you for your kind reply, but I now have the Creality box, but I am very dissatisfied with it, because despite intensive efforts, I have not yet succeeded in transferring files from the MacBook to the printer via wifi. Only the useless cloud files can be loaded. All very unsatisfactory.
I had similar issues and which is why I failed the product in my review. It may be cheap, but it really isn't worth it if it doesn't work. Some users have been able to install Klipper so that it adds additional functionality, but this is something which I haven't tested recently. Octoprint is still my go to for the time being, but I am hoping to learn Klipper sometime in the future.
Quien rayos realiza modelados 3d, laminados e impresión desde un celular ??? que tontería.... esa caja debía tener una interface web y enviar trabajos desde cualquier dispositivo usando el navegador o una aplicación multi plataforma
It was telling you that you don't have Internet on your phone 😅 laser engravers work the same. I know this is an old review, but you didn't even use it properly.
I used my laptop as a hotspot for my connection, unfortunately, nothing I tried worked. Several others had similar issues. Since the video is quite old now, it's possible that the issue has been fixed.
Do you have a time stamp for the aforementioned connection? It was something I verified on multiple occasions, and while it is possible that I used the different footage, since I had spent several hours connecting and reconnecting to resolve the issue.
While directly connected to the box you WILL NOT have internet. At that point you must direct it towards your Wi-Fi router and then disconnect from it. This works the same for many products including some streaming boxes, garage door openers, even home assistant devices. Nothing new
Just one problem. It uses a cloud based app, so it's pretty much useless at that point if it doesn't connect to the app. Also, I did try that. At the time, it just wouldn't connect.
@@Yarkspiri Hi, if you read the instructions, it says: 1. Please access your phone to WI-FI of the device 2.Come Back to this page after connecting to the device's Wi-Fi After coming back, in the next step, it asks for your Wi-Fi SSID so it can connect to it.
@@YosiSaad Sorry to disappoint you, but I did all of those steps. At the time, the device wasn't working properly, and my phone wasn't unable to establish a connection. I've paired a good amount of devices and I must say that this is one of the more cumbersome implementations that I've experienced. While the experience may have improved since the time of the recording, I still can't recommend this product based on my own experiences.
links
It's in the description below the video. It's the link that the supplier provided, so I'm unsure whether it's still active.
We don't use those links the bitly ones
I'll find it another way thank u
Not sure all the bad reviews on this. It has worked perfectly for me. Not a single issue yet. YET.
There's just really better options out there at the moment, so long as you're willing to take a bit more time settings things up. Also, at the time of recording this video the technology was still pretty new, so some changes may have been made since.
I had the same issue that Wi-Fi box is trash it got bricked the first day I got it and I had to send it back for a new one and they wouldn’t do a replacement for the item and I needed it badly because there wasn’t anything else I could find to slice from my iphone because I currently don’t have a laptop or computer device.
Oh, that's rough. Some libraries/schools offer 3d printing services. You might be able to slice your files there??? I'm not sure if that's something which is feasible within your specific country.
Does this box let you remote power off your printer?
I did not find a feature like that during my testing. While it might be added in the future, it'll be limited to machines which have such an ability to begin with. Many of the Ender machines require that the power button be physically turned off in order to work.
@@Yarkspiri i ordered a smart plug instead.. I can webcam with a very old android phone to check if print is over. And online close the plug after it finishes.. In the emergency can directly also cut if i am not there.
Can it connect to the regular cr-10 not the cr-10 smart but the cr-10
I wasn't able to test that feature since on the model I received I wasn't able to connect within the app. Even with support help at the time, I wasn't able to get it working. Someone else mentioned that there are new features now active, so I'll try again and post an update if I do get to work correctly.
Ok
Hello ! I do not want to work with Creality wifi box with skr mini v2.0 board. and with the new android. I set this board because my Ender 3 was running quietly. help to understand. how to make work
Unless you actually connect it to your printer, you shouldn't have to. Only a couple of printers have this integrated, and I'm working in a video to bypass that as we speak. You should be able to simply transfer your files to your motherboard through SD card or micro SD as per usual. Most SKR Mini V2.0 boards still have the SD card slot (normally labelled SD-M).
Have you ever considered buying an Ethernet cable or just a wireless Wi-Fi adapter
When testing this device, I tested another cable connection + another router during my troubleshooting steps. Unfortunately, these didn't resolve the issue at hand.
What other options for camera your suggesting for my new ender 3 s1 ? Thank you for the honest review, keep up!
A combination of a raspberry pie with octoprint and any compatible camera. There's an online list of compatible cameras that have been added for Gphoto. I used that setup while doing some contract work and although it was confusing at first to learn (I didn't know anything about Linux at the time) it was well worth the effort.
Are you able to use a regular web camera?
Unfortunately, I wasn't able to test that feature. I was unable to connect to the device to the cloud, therefore most of the features weren't activated. If I can ever get it working, I'll do a follow-up video.
No. It says must be a creality cam.
As long as the camera you find supports MP4 video. Other standards will not work with this device.
Is it worth it. Or should I get something like a ring or gopro camera 📷 🤔
Buy something else.
I went with ring indoor camera. Now looking for 3D model to hold it down to ender 3d v2
@@Yarkspiri Has Creality upgraded it ?
Since this video, Creality has released the source code, and it's also now compatible with Klipper. So if you're willing to tinker with it, you might want this option. However, I'm still getting reports that there are issues with this device, so I'm currently unsure where is stands.
@@Yarkspiri thank you for your time to respond to me. I'm still new at this 3d printer
Works great with my Ender 3 S1 Pro
Significant changes were made with the firmware, so it's possible that many of the initial issues were fixed since then, however I still haven't been able to connect to this device, so it may depend on your own connection.
can you tell me name of voice bot you use?
I don't use a bot voice??? I remove any unnecessary pauses to make the video shorter, along with some filters to help remove background static.
@@Yarkspiri it really sounds good 👍🏻
@@parthkorat2527 Thank you!
Just received my box. Got it all hooked up and connected. Try to print? Forget it. Right to the trash !
Ya. Currently, it's just too limited in its application which is unfortunate.
Perfect! I'll take ten of them! 😂
It was so bad I decided to make a follow-up video telling companies what features me and others might be looking for. Hopefully the companies take a good long look at it before we see something else come out.
The raspberry pi cost presently about $150 ….
At the time of making this video, the price was quite a bit lower. But due to the shortages and people mining, the price has gone up quite a bit. However, there's now a new option which is still affordable. You can get the raspberry Pi Zero 2W which others have been able to use for this same purpose.
@@Yarkspiri
Thank you for your kind reply, but I now have the Creality box, but I am very dissatisfied with it, because despite intensive efforts, I have not yet succeeded in transferring files from the MacBook to the printer via wifi. Only the useless cloud files can be loaded.
All very unsatisfactory.
I had similar issues and which is why I failed the product in my review. It may be cheap, but it really isn't worth it if it doesn't work. Some users have been able to install Klipper so that it adds additional functionality, but this is something which I haven't tested recently. Octoprint is still my go to for the time being, but I am hoping to learn Klipper sometime in the future.
Quien rayos realiza modelados 3d, laminados e impresión desde un celular ??? que tontería.... esa caja debía tener una interface web y enviar trabajos desde cualquier dispositivo usando el navegador o una aplicación multi plataforma
It's a very bad device. They came out one with one that's based off of Klipper, but I have yet to try that one.
It was telling you that you don't have Internet on your phone 😅 laser engravers work the same. I know this is an old review, but you didn't even use it properly.
I used my laptop as a hotspot for my connection, unfortunately, nothing I tried worked. Several others had similar issues. Since the video is quite old now, it's possible that the issue has been fixed.
Do you have a time stamp for the aforementioned connection? It was something I verified on multiple occasions, and while it is possible that I used the different footage, since I had spent several hours connecting and reconnecting to resolve the issue.
While directly connected to the box you WILL NOT have internet. At that point you must direct it towards your Wi-Fi router and then disconnect from it. This works the same for many products including some streaming boxes, garage door openers, even home assistant devices. Nothing new
Just one problem. It uses a cloud based app, so it's pretty much useless at that point if it doesn't connect to the app. Also, I did try that. At the time, it just wouldn't connect.
@@Yarkspiri Hi, if you read the instructions, it says: 1. Please access your phone to WI-FI of the device
2.Come Back to this page after connecting to the device's Wi-Fi
After coming back, in the next step, it asks for your Wi-Fi SSID so it can connect to it.
@@YosiSaad Sorry to disappoint you, but I did all of those steps. At the time, the device wasn't working properly, and my phone wasn't unable to establish a connection. I've paired a good amount of devices and I must say that this is one of the more cumbersome implementations that I've experienced. While the experience may have improved since the time of the recording, I still can't recommend this product based on my own experiences.
@@Yarkspiri Not dissapointed :) Just trying to help. Thanks for the review and response
@@Yarkspiri you right! Just receive it try in 6hours haven’t connect any damn thing