Thank you for the video. The local appliance parts store wanted $45 for that switch. So, I cut it off right at the switch, connected the two wires with a butt connector. Covered it with some shrink tubing and used electrical tape at the ends of tubing for good measure. I'm old and live alone, and I will (hopefully) never be stupid enough to stick my hand in the tub while it's screaming in circles.
This is very dangerous. People and pets can and do get hurt. DO NOT DEFEAT a Lid lock. But a new Lid lock and replace it. PEOPLE I see pets and children get hurt or die frequently. This is avoidable. DO NOT defeat lid locks. Lid locks serve a very good purpose.
Piss off with the "it's dangerous" BS. We all need a working washer. Getting the wire was so cheap at my local store that when I explained it they just gave it to me for free because I needed so little
My friend, twenty years ago my dad had to pay to a guy for the repair and of course the spare part. Exactly today I solved the problem identified it first and then performing this solution thanks to your video. Amazing the knowledge you broadcast. Of course I saved $20
I thank God for you wonderful DIY TH-cam content creators who take the time to share. The AC guy literally left a piece of wire on my dining room table that I used to fix this. I panicked for a minute when I couldn’t get that casing out but then I watched you again and saw that you pulled up on that little piece in the front and I was off to the races. Whoo hoo!!! Thank you😃❤️😃
Our switch broke ages ago and I had just unscrewed it from the machine, then clamped it closed with a wooden clothespin and stuffed it deeper under the top. It (mostly) worked perfectly, but would randomly come loose during a jarring spin cycle - then the metal tab fell off and there was less material to clamp. It became so annoying that I had to turn my brain back on and wondered how difficult it'd be to just close the circuit once and for all. You saved me even more thinking. This is probably the fastest fix I've done in years. Thanks!
This was the best video I found! Thank you so much!!! The bypass worked perfectly! Just took a piece of wire from an old ceiling light! Worked like a charm!
I just followed your video and was able to do it and finished my laundry 😂 I’m so happy.. I’ve just ordered the part from Amazon now, do you have a video on how to replace it. Thank you so much 😊
Broke off a piece of coat hanger to use as the wire and had the tape on hand. No store trip needed and $200 saved by not having to buy a used washer. Thank you guys!
Man thanks so much, I was seriously about to go buy a new washer, mine is the older Kenmore 70 series and I thought it had just given out. Can't say thanks enough.
Bro i just did this and it was exactly the problem solving video I needed😭😍 my washer is back up and running # you are amazing! # I Thank God for sending me right to your video 🙏🏾💕
I have a Kenmore Series 80 washer as well and this worked well! I was able to drain the water and ordered a replacement lid switch. Thanks for sharing. I've subscribed!
Thaml you honestly for helping me fix my kenmore last year. But I think its on its way out. Rip. As a servicemen is there another top loader washing machine that you swear by? I want something that's reliable and easy to fix if it breaks down. Any reccomendations would be appreciated. 🙏🏼
Sorry. I’m not a serviceman. I’m just a homeowner who likes to help others repair things. This is actually the only washer I’ve ever owned. What makes you think yours is going bad? I’d recommend repairing it instead of getting a new one. Speed Queen is known to be the higher end with better longevity but you pay more for it.
Mine ended up having two problems, the lid safety switch, the safety latch, and the pump was loose and rattling and was going to fail. I eliminated the lid switch altogether because there are no kids in this household. Thank you for the video.
Great video! Super helpful! I do have a question for you: I bypassed the switch last week and everything was good. I'm still waiting on the part to come in. My wife ran a load today and the washer stopped again midcycle. I tried to bypass the switch again, without any luck. Any ideas on what else I can try? Thanks.
@@TightWadDIY I think the wire I side to bypass must have suffered some kind of fault. The part came in today and it has completed a couple of loads. I appreciate your advise and response. You've got a new subscriber here.
Here's another thank you! I have an Inglis washer (another one made by Whirlpool). Mine had two screws on the back side of those end caps at the bottom - underneath the cover, wiring was identical.
You have no idea this video saved me I have the exact same washer and was having a problem with the lid switch so I put a screw driver in to pin down the lid switch ran just fine my kids are grown so they know better to mess with moms washer anyways. So today my mother thought that removing the lid switch would some how fix my problem not only did she remove it but then proceeded to LOSE the lid switch I'm sorry what so yeah thank you so much for this cause the water in my washer stinks to high heaven
@@TightWadDIY If your Kenmore Washer dies just look into investing in a Speed Queen Washing Machine. Speed Queen is American made and guaranteed to last 25 years and 10,400 cycles.
Thank you, after watching so so many why my washer will not turn on. And getting pushed to dryer vids that do not even apply. Your one example of where you turn the knob nothing works, was a ahh thank you. Was not evan the same type of washer but made sence to my problem.
Thanks loads for video. The connector for my lid switch is melted/fried. Local parts guy says it's a discontinued part. I'm guessing the center wire is the ground. Any chance I can bypass the connector too? Or do you think a connector from another model would work?
No it can't be my switch, I just changed it a couple of years ago; the last one worked for decades...oh, it IS the switch!! Now I'll order two! Thanks for the hack!!
@@stefaniem1374 It should be fine until your part comes in. You could also cut some wire from the faulty switch and use that instead if the paper clip if you are worried.
@@TightWadDIY thank you. I didn't order the part yet. It's a Whirlpool washer. I wasn't sure 100% it was the problem. Now I know. Do you think it's best to order from Whirlpool or would Amazon be ok? I don't know much about washers and don't want to ask my husband 😄
Nice trick! Now, can you please tell me the best place to order the replacement switch, online? Mine is a Kenmore washer, (110 series, I think?) if that matters. Thanks!
I suggest you look on a site such as repair clinic and find the model number first. Then look on Amazon using they part number and try to find a part made by Kenmore, not a knock off.
YES ! That fixed it. Now to replace the switch or soldier the wires permanently. I'd checked the pump and motor and clutch. This was sooo much easier and cheaper than replacing my motherboard like ai thought I was going to have to do.
@@TightWadDIY this one? seems pretty straight forward... but I can see how pulling those guide clips could be rough th-cam.com/video/2_bEl0n-X60/w-d-xo.html
I was wondering about the gage of wire; your's looks thick! Then I saw the successful posts w/ paper clip. I'm going to clip a section of wire from the faulty switch. Thanks!
Love You.. I just had my washer spin cycle just go Out... And I see your video ..Sorry I really love skilled Hands. I fix everything .. Lawnmower's , Ceiling Fans etc. Well guess it's washing machines now..
Just ordered the part, gonna try this as I often fix electrical / mechanical things myself. This time a FREE washer left out by the dumpster....thx for video. I looked at the replacing the switch video as well !
@@TightWadDIY I just used the "hack" bypass method...and the machine is draining/spinning....YAY!! For the piece of wire I just removed the broken switch assembly and snipped off a couple inch piece of the ground wire, used my wire strippers and taped it in place....perf !!
I hope this works 😥😭 what a nasty surprise to come home to. Can I actually do a few loads like this while I find a replacement part? What are the actual safety worries? Thank you!
If it’s just a lid switch issue, I would say it’s safe to do some loads. Just make sure no one opens the lid during a cycle. The high spin rate would be dangerous for a hand or arm.
@@TightWadDIY thank you. I used a plastic fork to press up and down on the switch and it won't spin. Actually the switch stays down by itself.. so it probably IS the switch!
@@angelr9096 My switch was completely broken so pressing down didn’t do anything. You could actually cut some of the wire from the switch and use it to jump across the two points if you don’t have any spare wire.
Thank you, and people make sure you are using sufficient gauge wire and jumping it while the machine is unpowered. I made the mistake and took some burns because of it
My switch still works if I push it down with a pen or something. I think the post on the lid caught on clothes goingin or out of the washer and broke off a little. What is the post on the lid called? Is there a replacement piece for that? thanks!
Wow! Super cool this just worked for me too. Thanks a million for posting this video. What an incredibly easy fix even for someone not very skilled like me!
This is very dangerous. People and pets can and do get hurt. DO NOT DEFEAT a Lid lock. But a new Lid lock and replace it. PEOPLE I see pets and children get hurt or die frequently. This is avoidable. DO NOT defeat lid locks. Lid locks serve a very good purpose.
i had this problem and i tried this hack and it works just fine . it just need to be a temp fix till you get a replacement switch. i used this hack and never replaced the switch up until it still agitates but doesn't drain or spin . so yeah, a temp fix dont do what i did .... started working normally after replaced the switch .
Hi. I have a cabrio whirlpool high efficiency no agitator. Can this work on mine? The switch is the same or looks same? My top is a little harder to take apart to get back to that piece. I watched a video on how to replace switch I’m waiting on the part. But didn’t see anything about bypassing my mom sent me your link. Thanks if you can help or not ty anyhow
That’s great to hear! I just launched T-shirts this week! You should check them out below any video! If you decide to replace the switch, I have a video for that process too!
This is very dangerous. People and pets can and do get hurt. DO NOT DEFEAT a Lid lock. But a new Lid lock and replace it. PEOPLE I see pets and children get hurt or die frequently. This is avoidable. DO NOT defeat lid locks. Lid locks serve a very good purpose.
i had to do this on kenmore 70; did this while part was on order. the water go very stinky very fast; im cattle farmer and had a load in when things went bad. now i have to learn about switching the switch. There are not just wires but a tube. Can't get old switch out too.
Get to the switch and use zip ties on the two sliding parts to keep them locked down. My switch was all busted up and it still worked. I zip tied the whole unit under where the hole is, and took out the connector on the lid with an allen wrench.
You are the man!!! I have Kenmore Series 90 ( yeah they still worked until today) . Used your tutorial and worked! Now I have to order the part. Thank you!
My Lid switch clicks, but when I check it with Multi-meter, it is discontinuous. So I took you advice and connect a small wire between the 1st and 3rd Wires in that wire harnessing coming from the Control Board going to the Lid Sensor. It did not work. It restarted it at rinse, and filled up a little more than the level it was at, but the spin cycle it did not work and now still have water in my machine. What would look at from here?
Yep! The wire I was using was too thick, somehow it did not make it all the way down the the wire harness channel to make actual contact. So I switched from 10 G to 12 G. Not only that but I taped across then down into the wire harness. Now the Spin cycle works, just need to buy the lid switch to eventually replace it
Hi I have a Whirlpool Ultimate care ii washer that wont spin. I got it to spin once but doesnt work anymore and there is a burning smell when i put it on spin. Took apart the washer. Motor coupler is fine. Clutch seems to be fine also. Its stiff when I try to spin it. I noticed oil on my floor and the transmission is sticky. I tought it might be the shaft seals that are leaking and oil gets on the clutch so it slips causing it not to spin and that is when i get the burning smell... Does that make any sense???? Tried to take off the spanner nut but it just wont come off... Any tricks?? Did put penetrating oil but doesnt move.. will the spanner nut tool make it easier.. any help would be appreciated !
5 years later and you're still fixing washers...thanks man!
Thank you for the video. The local appliance parts store wanted $45 for that switch. So, I cut it off right at the switch, connected the two wires with a butt connector. Covered it with some shrink tubing and used electrical tape at the ends of tubing for good measure. I'm old and live alone, and I will (hopefully) never be stupid enough to stick my hand in the tub while it's screaming in circles.
This is very dangerous. People and pets can and do get hurt. DO NOT DEFEAT a Lid lock. But a new Lid lock and replace it.
PEOPLE I see pets and children get hurt or die frequently. This is avoidable. DO NOT defeat lid locks. Lid locks serve a very good purpose.
@@mrgcav You see that frequently? lmao
Well said.
Piss off with the "it's dangerous" BS. We all need a working washer.
Getting the wire was so cheap at my local store that when I explained it they just gave it to me for free because I needed so little
Haha. That’s great! Not worth ringing up .05 of wire!
My friend, twenty years ago my dad had to pay to a guy for the repair and of course the spare part. Exactly today I solved the problem identified it first and then performing this solution thanks to your video. Amazing the knowledge you broadcast. Of course I saved $20
That’s great!
I thank God for you wonderful DIY TH-cam content creators who take the time to share. The AC guy literally left a piece of wire on my dining room table that I used to fix this. I panicked for a minute when I couldn’t get that casing out but then I watched you again and saw that you pulled up on that little piece in the front and I was off to the races. Whoo hoo!!! Thank you😃❤️😃
It’s my pleasure. I truly enjoy making videos to help people save money. I’m glad this one worked for you!
Thank you! Right over the target! Mine was the lid by pass surgery. Wife is so happy. I gave you the credit.
That’s great! Always feel free to take the credit when doing repairs using my help! Haha.
WOW THANK YOU SO MUCH ! i’m from the PHILIPPINES- got this machine from US and now uve saved us alot of 💵 for this. It works! Bless you!
You're welcome!
I just did this and it worked like a charm.... I don’t have kids so it’s ok. Thanks for this video!
Our switch broke ages ago and I had just unscrewed it from the machine, then clamped it closed with a wooden clothespin and stuffed it deeper under the top. It (mostly) worked perfectly, but would randomly come loose during a jarring spin cycle - then the metal tab fell off and there was less material to clamp. It became so annoying that I had to turn my brain back on and wondered how difficult it'd be to just close the circuit once and for all.
You saved me even more thinking. This is probably the fastest fix I've done in years. Thanks!
This was actually the fix that led me to start a TH-cam channel! I’m glad it worked for you too. It’s so easy!
This was the best video I found! Thank you so much!!! The bypass worked perfectly! Just took a piece of wire from an old ceiling light! Worked like a charm!
My pleasure!
OMG! That worked!!!! Thank you so much. Since I live alone, I am going to leave it like that for now. That was so informative.
I’m glad it worked for you too!
You're my new hero! Being an old gal that's a do-it-yourself er, this was gold. Better yet, that's EXACTLY my washer!👍
That’s great!! Be sure you subscribe!
I just followed your video and was able to do it and finished my laundry 😂 I’m so happy.. I’ve just ordered the part from Amazon now, do you have a video on how to replace it. Thank you so much 😊
That’s great! I do have a video showing to replace it too!
Here is the link to the video showing how to replace it: th-cam.com/video/2_bEl0n-X60/w-d-xo.htmlsi=MHuDdWJhpmXeO55e
Thank You! You are a life saver. I’ve been going to the laundromat and spending way too much. I literally love you and your channel☺️🙂😉
YES it worked!!! 😚
You’re welcome! I am glad to hear it got yours fixed! I hate the laundromat! Haha. It reminds me of trying to do laundry in college!
Broke off a piece of coat hanger to use as the wire and had the tape on hand. No store trip needed and $200 saved by not having to buy a used washer. Thank you guys!
Glad you got it working.
I unplugged mine and waited 20 seconds or so, plugged it back in, and it’s working like a charm
Worked like a charm! Used 14 gauge single strand as the current wire looked pretty beat.
Great! I’m glad it worked for you too!
Man thanks so much, I was seriously about to go buy a new washer, mine is the older Kenmore 70 series and I thought it had just given out. Can't say thanks enough.
Great! I’m glad you got it working again!
Bro i just did this and it was exactly the problem solving video I needed😭😍 my washer is back up and running
# you are amazing!
# I Thank God for sending me right to your video 🙏🏾💕
Glad I could help
THANK YOU! I can now drain the water from my washer & wash clothes until the new safety switch arrives. 👍👍👍
My pleasure!
You need to title this video to help more people!! Add Kenmore 80 series to the title. This video has helped a ton. You have no idea.
Thanks for the tip! I just updated it!
@@TightWadDIY Thanks man. Fixed the machine 2 days with your help and one other video. 🙏🏼
Had this problem, followed your video, and IT WORKED. Now I am just waiting for parts to arrive
Glad it helped
@@TightWadDIY Where can I buy that wire - most are all straded copper .
@@vision1707 A hardware store like an Ace.
If you want to go ahead and replace the lid switch, click the link below for a full replacement video. th-cam.com/video/2_bEl0n-X60/w-d-xo.html
I have a Kenmore Series 80 washer as well and this worked well! I was able to drain the water and ordered a replacement lid switch. Thanks for sharing. I've subscribed!
dadustan Thata great! They are all very similar.
Just did this! Perfect! 7/8/22. Thank you! 23 yr old washer fixed
That’s great!
Big shoutout to you, I just fixed my washer 😎
Nice work!
Thaml you honestly for helping me fix my kenmore last year. But I think its on its way out. Rip. As a servicemen is there another top loader washing machine that you swear by? I want something that's reliable and easy to fix if it breaks down. Any reccomendations would be appreciated. 🙏🏼
Sorry. I’m not a serviceman. I’m just a homeowner who likes to help others repair things. This is actually the only washer I’ve ever owned. What makes you think yours is going bad? I’d recommend repairing it instead of getting a new one.
Speed Queen is known to be the higher end with better longevity but you pay more for it.
Bypassed the lid switch and ordered the part (thanks for attaching the link)!
My pleasure! Glad you got it fixed.
Mine ended up having two problems, the lid safety switch, the safety latch, and the pump was loose and rattling and was going to fail. I eliminated the lid switch altogether because there are no kids in this household. Thank you for the video.
I’m glad you were able to figure it out!
You are an awesome troubleshooter...this simple method I tried and it WORKED. THANK YOU.
You're welcome!
Great video! Super helpful! I do have a question for you:
I bypassed the switch last week and everything was good. I'm still waiting on the part to come in. My wife ran a load today and the washer stopped again midcycle. I tried to bypass the switch again, without any luck. Any ideas on what else I can try?
Thanks.
Hmmm…it’s possible your agitator is messed up
@@TightWadDIY I think the wire I side to bypass must have suffered some kind of fault. The part came in today and it has completed a couple of loads.
I appreciate your advise and response. You've got a new subscriber here.
Here's another thank you! I have an Inglis washer (another one made by Whirlpool).
Mine had two screws on the back side of those end caps at the bottom - underneath the cover, wiring was identical.
I’m glad to hear it worked for you too! A lot of these are sold under different names.
What type of wire did you use?
@@cristiegilvaja8663 just a piece of an old, cheap indoor extension cord that I didn't mind cutting up
Just did it found some old wire off a plug cut it Bing bang boom .. waiting for new part thanks to people like you
That’s great! I’m glad you found some wire to use.
You have no idea this video saved me I have the exact same washer and was having a problem with the lid switch so I put a screw driver in to pin down the lid switch ran just fine my kids are grown so they know better to mess with moms washer anyways. So today my mother thought that removing the lid switch would some how fix my problem not only did she remove it but then proceeded to LOSE the lid switch I'm sorry what so yeah thank you so much for this cause the water in my washer stinks to high heaven
I’m glad you were able to get it bypassed!
@@TightWadDIY What can I use instead of piece of wire ? HOme depot doesn't sell just one wire.
Thank you very much for this video. Saved me from a lot of stress.
You’re welcome!
I appreciate your time and talent in making this video. Helped me and saved some money.
Way better than replacing it with a new washing machine especially the new modern machines which are out today compared to 15-30 years ago.
Western Massachusetts Elevators Agreed. I’m hanging on to this model as long as I can. It’s simple and works great.
@@TightWadDIY If your Kenmore Washer dies just look into investing in a Speed Queen Washing Machine. Speed Queen is American made and guaranteed to last 25 years and 10,400 cycles.
Did this today And it worked like A charm.so thanks for this video
That’s great. You’re welcome!
Thank you, after watching so so many why my washer will not turn on. And getting pushed to dryer vids that do not even apply. Your one example of where you turn the knob nothing works, was a ahh thank you. Was not evan the same type of washer but made sence to my problem.
I’m glad I was able to help!
Needed the bypass today and switch will be here soon. Thanks
Im glad you found the video!
Thanks loads for video. The connector for my lid switch is melted/fried. Local parts guy says it's a discontinued part. I'm guessing the center wire is the ground. Any chance I can bypass the connector too? Or do you think a connector from another model would work?
I bet you can tie the wires together but I haven’t tested it.
Very professioanly done. Concise and insightful..many thanx
Thank you for the kind comment.
Thank you for the video! 20 minutes and .30¢ of electrical wire and our washer is working again. Perfect!
That’s great!
Thanks for the video. Was able to get it bypassed in 15 minutes.
That’s great! I have another video showing how to replace the switch also.
Thanks so much!!! I was able to drain my washer - great temp fix!
Danielle Katzoff That’s great! I’m glad it worked for you!
We followed your instructions and it just worked. Thank you so much
That’s great! I’m glad it worked for you too!
No it can't be my switch, I just changed it a couple of years ago; the last one worked for decades...oh, it IS the switch!! Now I'll order two! Thanks for the hack!!
Yes! I’m glad you got it working again!
You are a genius I just this this and bam my washers draining thank you so much!!!
Glad I could help
Great job and thank the Lord for your video. Save me time and money
Thanks! I’m glad you found it helpful too!
Thank you soo much! I never comment on videos but this worked like a charm. I used a paper clip.
I’m glad it worked for you too.
This video helped me! I used a paper clip as well. How long can I use it like this before the part comes in?
@@stefaniem1374 It should be fine until your part comes in. You could also cut some wire from the faulty switch and use that instead if the paper clip if you are worried.
@@TightWadDIY thank you. I didn't order the part yet. It's a Whirlpool washer. I wasn't sure 100% it was the problem. Now I know. Do you think it's best to order from Whirlpool or would Amazon be ok? I don't know much about washers and don't want to ask my husband 😄
@@stefaniem1374 I ordered my replacement part on Amazon. It was fine. I have a video showing how to replace the part too.
Thank you. Literally just fixed my machine because of this video.
Thank you very much! The fix did it and saved much hassle & money.
Glad it helped!
I just fix my washing machine Inglis and y did bypass the lid switch with an electrical wire.Just work perfectly😊
That’s great!
Nice trick! Now, can you please tell me the best place to order the replacement switch, online? Mine is a Kenmore washer, (110 series, I think?) if that matters. Thanks!
I suggest you look on a site such as repair clinic and find the model number first. Then look on Amazon using they part number and try to find a part made by Kenmore, not a knock off.
I do have a video showing how to replace the switch also with a link to purchase a new switch.
YES ! That fixed it. Now to replace the switch or soldier the wires permanently.
I'd checked the pump and motor and clutch. This was sooo much easier and cheaper than replacing my motherboard like ai thought I was going to have to do.
That’s great! I have another video showing how to replace the switch.
@@TightWadDIY this one?
seems pretty straight forward...
but I can see how pulling those guide clips could be rough
th-cam.com/video/2_bEl0n-X60/w-d-xo.html
Thanks!! We fixed the machine using this method. Used a hair Bobby Pin in place of a wire. Taped it down real good!
I like the ingenuity but I recommend replacing it with wire.
♾ Thanks for explaining this so easy you are a Good teacher BLESSINGS TO YOU AND YOUR LOVE ONE'S AMEN 🙏
Thank you. I’m at school teacher by trade.
Thanks for this video. I have exactly the same washer with exactly the same issue. Totally fixed it. Thanks!
Great! I’m glad it worked for you too! I have several videos showing how to fix this machine.
I was wondering about the gage of wire; your's looks thick! Then I saw the successful posts w/ paper clip. I'm going to clip a section of wire from the faulty switch. Thanks!
Using wire from the faulty switch is a great idea.
Love You.. I just had my washer spin cycle just go Out... And I see your video ..Sorry I really love skilled Hands. I fix everything .. Lawnmower's , Ceiling Fans etc. Well guess it's washing machines now..
I’m glad you found the video! Hopefully you are able to get it fixed quickly.
@@TightWadDIY I need to order a switch ..Like today .Rats.
@@anthonyharper8161 I have another video showing how to replace the switch.
@@TightWadDIY let me know please ? Thanks in advance.
@@anthonyharper8161 th-cam.com/video/2_bEl0n-X60/w-d-xo.html
Just ordered the part, gonna try this as I often fix electrical / mechanical things myself. This time a FREE washer left out by the dumpster....thx for video. I looked at the replacing the switch video as well !
MonicasArtWorks Fixing things gives such a satisfying feeling.
@@TightWadDIY I just used the "hack" bypass method...and the machine is draining/spinning....YAY!! For the piece of wire I just removed the broken switch assembly and snipped off a couple inch piece of the ground wire, used my wire strippers and taped it in place....perf !!
MonicasArtWorks That’s a great idea! I love that you used the existing wire as a jumper.
I hope this works 😥😭 what a nasty surprise to come home to. Can I actually do a few loads like this while I find a replacement part? What are the actual safety worries? Thank you!
If it’s just a lid switch issue, I would say it’s safe to do some loads. Just make sure no one opens the lid during a cycle. The high spin rate would be dangerous for a hand or arm.
@@TightWadDIY thank you. I used a plastic fork to press up and down on the switch and it won't spin. Actually the switch stays down by itself.. so it probably IS the switch!
@@angelr9096 My switch was completely broken so pressing down didn’t do anything. You could actually cut some of the wire from the switch and use it to jump across the two points if you don’t have any spare wire.
There's no actual safety worries. This is designed to keep repairmen busy taking your money.
This worked! Informative and clearly explained.
Great! I’m glad you found it helpful! Be sure to hit that thumbs up and subscribe.
Thank you so much for this video! Saved us in a real bind last night and I'm relieved for the quick, free fix!
My pleasure! I’m glad it worked for you too!
Do you think this will work for a GE is washer? My door was slammed & now it won't come on because the lid won't lock..
Thank you!!! Was about to drain the water with a bucket.
Hopefully this worked for you. Draining with a bucket would take forever.
Thanks man, it worked! I ordered the switch. If you are ever in town I.O.U. a steak dinner.
I do love steak! Your thanks is enough though!
Thank you! What a blessing! Easy to understand and it worked perfectly!
I’m glad it worked for you too!
Exactly what I needed. Really effective video. Thank you so much!!
I’m glad it worked for you too! Be sure to hit that thumbs up.
Perfect bypass. Thanks for the Vid.
I’m glad it worked for you too!
Brilliant, thank you, worked like a charm
You're welcome!
Great video and you have a gang of orbs in your home, a lot of love around you.
Or dust being caught in the flash of the camera! 😂😂
.....highly doubtful, for me, anyway. I can show you something that will have you thinking differently.
Thank you, and people make sure you are using sufficient gauge wire and jumping it while the machine is unpowered. I made the mistake and took some burns because of it
Nice tip!
What gauge did you use? And how do you jump it lol? Appreciate the help
@@kamranamin6330 14guage works. Jumping just means you are bypassing the circuit by pushing that wire into the ports shown.
@@GrillThisSmokeThat Appreciate your help
My switch still works if I push it down with a pen or something. I think the post on the lid caught on clothes goingin or out of the washer and broke off a little. What is the post on the lid called? Is there a replacement piece for that? thanks!
Hmmm…I’m not sure what it’s called sorry
Wow! Super cool this just worked for me too. Thanks a million for posting this video. What an incredibly easy fix even for someone not very skilled like me!
That’s great! I’m glad it worked for you too!
This is very dangerous. People and pets can and do get hurt. DO NOT DEFEAT a Lid lock. But a new Lid lock and replace it.
PEOPLE I see pets and children get hurt or die frequently. This is avoidable. DO NOT defeat lid locks. Lid locks serve a very good purpose.
Thanks so much! The bypass worked great. Now ordering the new lid switch.
That’s great! I’m glad to hear you plan to compete the repair. I have a video showing that process too.
Wonderful video, very informative, thank you for posting.
You’re welcome! I’m glad you found it helpful. Be sure to subscribe and hit that thumbs up!
I just reached level 34 of manhood.. Thanks bro!
😂😂 I’m happy to help. You are very welcome.
i had this problem and i tried this hack and it works just fine . it just need to be a temp fix till you get a replacement switch. i used this hack and never replaced the switch up until it still agitates but doesn't drain or spin . so yeah, a temp fix dont do what i did .... started working normally after replaced the switch .
Mine worked normally for a year before I replaced the switch.
I don't have any extra wire hanging around to use- what kind should I buy at the store?
Hi. I have a cabrio whirlpool high efficiency no agitator. Can this work on mine? The switch is the same or looks same? My top is a little harder to take apart to get back to that piece. I watched a video on how to replace switch I’m waiting on the part. But didn’t see anything about bypassing my mom sent me your link. Thanks if you can help or not ty anyhow
Perfect advice. Thank you for making this video tutorial.
You’re welcome!
Thank you very much for video. Very helpful!! 🙂🙏🏻
Glad it was helpful!
This really helped me out 👍
Glad to hear!
My lid lock cables are red, white and blue. Does this still apply as long as my (red) is my hot cable
It should be the same. I can’t guarantee it but just try it and see.
Fantastic. Thank you brother.
My pleasure
Helped me out big time. I appreciate it.
My pleasure!
It worked perfectly, thank you for this hack!! I am now a new subscriber to your channel!!
That’s great to hear! I just launched T-shirts this week! You should check them out below any video! If you decide to replace the switch, I have a video for that process too!
@@TightWadDIY I'll check out the merch and other vids on your channel, thank you :-)
This is very dangerous. People and pets can and do get hurt. DO NOT DEFEAT a Lid lock. But a new Lid lock and replace it.
PEOPLE I see pets and children get hurt or die frequently. This is avoidable. DO NOT defeat lid locks. Lid locks serve a very good purpose.
i had to do this on kenmore 70; did this while part was on order. the water go very stinky very fast; im cattle farmer and had a load in when things went bad. now i have to learn about switching the switch. There are not just wires but a tube. Can't get old switch out too.
I have a video showing that process too!
Instead of opening the panel and doing the bypass at the connector, can you do the bypass at the switch instead ?
It is really difficult to get to. Much easier to just do it at the panel.
Get to the switch and use zip ties on the two sliding parts to keep them locked down. My switch was all busted up and it still worked. I zip tied the whole unit under where the hole is, and took out the connector on the lid with an allen wrench.
Depends on how bad it’s broken. Not a bad idea though.
I did this but the lock light is blinking and washer won’t do anything. Light wouldn’t come on at all before. Any advice? Thanks!!!
You are the man!!! I have Kenmore Series 90 ( yeah they still worked until today) . Used your tutorial and worked! Now I have to order the part. Thank you!
That’s great! These things are beasts! They are way more durable than the newer ones.
Where can I get a piece of wire to bypass it?
@@marcquelkennedy3254 You can come some from the broken switch wire.
@@TightWadDIY thank youuuu my switch just broke a couple days ago and I’ve been looking for a temporary fix.
Excellent video
Thank you very much!
Thanks for the video, you helped me bypass my Kenmore while I wait for a replacement part to come in.
Yajirushi89 That’s great! I’m glad yours is working again.
Where did you order the part
The two outer wire can they cut and connect directly to each other thanks?
I’m not sure. Sorry.
My Lid switch clicks, but when I check it with Multi-meter, it is discontinuous. So I took you advice and connect a small wire between the 1st and 3rd Wires in that wire harnessing coming from the Control Board going to the Lid Sensor. It did not work. It restarted it at rinse, and filled up a little more than the level it was at, but the spin cycle it did not work and now still have water in my machine. What would look at from here?
Is it making any noise?
No, nothing noticeable- wash cycle, rinse cycle sounded normal@@TightWadDIY
Yep! The wire I was using was too thick, somehow it did not make it all the way down the the wire harness channel to make actual contact. So I switched from 10 G to 12 G. Not only that but I taped across then down into the wire harness. Now the Spin cycle works, just need to buy the lid switch to eventually replace it
@@Spartan1293-w3u That's great news! i'm glad its working again!
Dude, seriously thank you 🙏
Thanks so much,it definitely fixed my problem.
That’s great! I’m glad you found the video!
What gauge wire did you use for the bypass?
Hi I have a Whirlpool Ultimate care ii washer that wont spin. I got it to spin once but doesnt work anymore and there is a burning smell when i put it on spin. Took apart the washer. Motor coupler is fine. Clutch seems to be fine also. Its stiff when I try to spin it. I noticed oil on my floor and the transmission is sticky. I tought it might be the shaft seals that are leaking and oil gets on the clutch so it slips causing it not to spin and that is when i get the burning smell... Does that make any sense???? Tried to take off the spanner nut but it just wont come off... Any tricks?? Did put penetrating oil but doesnt move.. will the spanner nut tool make it easier.. any help would be appreciated !
Sorry. I’m not an appliance repair tech. Hopefully someone else will see your question and be able to help.
What gauge wire did you use? I tried this today with no luck, don’t think I had a good connection though