Love the ingenious use of hidden magnets! (Behind to wheel on the wood tower. They help to “suck” to balls into the hole and keep them from falling out during the ride) This gives the unit a very clean look and likely contributes to the speed performance.
I believe you're mistaken. The balls stay in the wheel because the hole is drilled at an angle. You'll note that the wheel support tower blocks the balls from rolling out until they reach the desired position. The metal you see on the back of the tower is the nut securing the axle.
Yes, I think you are right! The holes seem to be drilled toward the edge to about half the depth and then toward the centre as the exit the other side. I now see how they fall toward the dented as the disk moves. Very delicate design! Love it!
You do such neat stuff. I love watching all those videos. Where did you get the gear down motors? Would love to get a few of them and make something with kids.
@crocket1221 there is a simple trick to getting the wires bent: you take a lenght of wire and bend it around a cylindical object, eg a pipe, a dowel or a glass in oder to make parallel curves you simply take a shorter lenght of wire for the inside and the longer piece for the outside and bend them both around the same cylinder then align them until they are exactly parallel to each other. For the end loops you bend a short piece around a dowel and solder that into place
Applications like these on a larger scale of course could have great uses in making power. I would ABSOLUTELY LOVE to see you make a perpetual motion power maker. You'd be a billionaire.... Or the rich people who own power companies would assassinate you lol
🔵 You evidently know quite little about physics, or you'd realize that the only way this device could make power would be if you sat there and CRANKED it!!
Way cool ! If you make the holes at different positions you could create a drum beat ;-) Add a little Piezoelectric mic and a small amp and speaker ;-)
change the return arm to drop the balls farther from the wheel, then turn the beveled holder into a longer channel so that the balls are basically sitting in a single file queue
Great stuff, denha. All of your mechanisms & videos are very well done.
This machine proudly deserves the name: energy dissipation machine
Was actually looking for the clip of the tiny wheel from The Office but wow! This was so much cooler! I love it!
Very good, quite ingenious in fact! 10/10
Very good craftsmanship !
FINALLY!
You finally ran a machine at some nice speeds!
Super video.
Very efficient! Well done!
Very cool. Also very good desk setup :)
Mesmerizing, I loved it.
You should really sell these! The sound of it is really soothing making me sleepy :P
You are an inspiration! :D
That was awesome !!
Amazing! I really like it :-)
That is some awsome stuff!
Oh my God this channel is so good i love your content so much , i hope one day my videos could even be half as good as these.
that is such a satisfying sound...
Of course I find this video after I asked you about the wheel holes the other day!
Love the ingenious use of hidden magnets! (Behind to wheel on the wood tower. They help to “suck” to balls into the hole and keep them from falling out during the ride) This gives the unit a very clean look and likely contributes to the speed performance.
I believe you're mistaken. The balls stay in the wheel because the hole is drilled at an angle. You'll note that the wheel support tower blocks the balls from rolling out until they reach the desired position. The metal you see on the back of the tower is the nut securing the axle.
Yes, I think you are right! The holes seem to be drilled toward the edge to about half the depth and then toward the centre as the exit the other side. I now see how they fall toward the dented as the disk moves. Very delicate design! Love it!
why did i like this so much?
yeah that's probably it, thanks, you're a genius!
Truly amazing man, great job even tho i randomly found this video =D
You do such neat stuff. I love watching all those videos. Where did you get the gear down motors? Would love to get a few of them and make something with kids.
I just spend 5min of my life to see balls fall down oO and I love this oO
Great 👍👍👍 creativity
Congratulation! ... You just proved that a ball rolls downhill...
Awesome job....
cute art well done sir
It is a good idea.
Your test is passed 😁😁👍🏻 hahahah enjoy the sound
4:43 Va a estallar!!! . xD
Nice...i want it on top of my office table.. :)
What is the specification of your drive motor and where do you obtain these, Thank You
I really like that
Super cool
I love it.
I love this kind of stuff :)
Hermoso, casi hipnótico de ver.
Hypnotizing!
¡you are a genius¡
9/32 inch stainless steel ball.
Лайк!!!!прикольная штучка
Hypnotic!
"But, mom, I want to ride that wheel again!!"
Fuck you
@@hungvo7445 no u
It's a mad house! A mad house!
it looks cute
This time you didn't use your little chopsticks and everything went bananas!
Very nice
If only I didn't have a screw lose and lost all my marbles I would try building this.
Hello 4 year old pun
Why is the so mesmerizing? Do you sell these ? Amazing. Drew
Could *HAVE* be a great metronome!
interesting, thanks for sharing
An adjustment to youre wood ramp can make it run smoother
This is the trial production for sale.
Do people buy from you this kind of marble machine?
Eu sou brasileiro vejo esses exemplares é só de brincadeira na realidade da vida não tem garantia de sucesso no desempenho do funcionamento.
Hello + Denha I loved your marble machine, if I could pass the measures is that I want to make one too.
U R amazing😎🤔😁
That is great 😂
@crocket1221 there is a simple trick to getting the wires bent: you take a lenght of wire and bend it around a cylindical object, eg a pipe, a dowel or a glass in oder to make parallel curves you simply take a shorter lenght of wire for the inside and the longer piece for the outside and bend them both around the same cylinder then align them until they are exactly parallel to each other. For the end loops you bend a short piece around a dowel and solder that into place
Applications like these on a larger scale of course could have great uses in making power. I would ABSOLUTELY LOVE to see you make a perpetual motion power maker. You'd be a billionaire.... Or the rich people who own power companies would assassinate you lol
🔵 You evidently know quite little about physics, or you'd realize that the only way this device could make power would be if you sat there and CRANKED it!!
Free energy!! :)
epic!
Cool!!!
Very simple but very cool
Jan Nademlejnsky ya ya ya
With this sort of ingenuity you could probably open up a portal to another dimension..Be careful.
Way cool ! If you make the holes at different positions you could create a drum beat ;-) Add a little Piezoelectric mic and a small amp and speaker ;-)
Isn't this so satisfying to watch?
cool stuff
so good
Чем бы детя не тешилось,лишь бы не плакало.
even i dont see see the benefit : very nice construction
Super ideas
Remember when Lucy & Ethel were at the end of the chocolate assembly line? This is the mechanical version. LOL Poor little machine.
It is not a cone.
However, the movement is the same.
change the return arm to drop the balls farther from the wheel, then turn the beveled holder into a longer channel so that the balls are basically sitting in a single file queue
Very nice 👍
Whoa!
Neat.
you rock !!!!]
Very good
your luky u get to make cool stuff
Yes, and it will intertain you long time baby!
Awesome
you should make it so that marbles can move the motor and there is 2 wheels for the motor to be able to rotate :D
Lol. Cute :D
very nice
Iove..u..Fc..2019..มันสวย..งามมาก
.
Really satisfied
Nice
Excelente
what kind of wire you use to make the slider? thankss
Ohh nice
@rmoseley100 65angle
im not gonna be the same anymore
How much would you want for that first item?
Can you tell me the specifications of the motor attachment you used please?
So simple, So nice.
Work of art.
It'll work better if upper rail will be little more horizontal
good!
Clever