RX 7900XTX BUILD NZXT H6 FLOW Black/White - Timelaps & Benchmark Results
ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2024
- Cooperation build with twitch streamer justedris, from germany:
/ justedris
System:
Case: NZXT H6 Flow
Motherboard: MSI MEG X570 Unify
CPU: Ryzen 9 5900X
GPU: Powercolor Hellhound RX 7900 XTX White
M.2 SSD: Samsung Evo 970 Plus
RAM: Corsair Platinum Dominator RGB 32GB (3600Mhz)
Cooling: Arctic Liquid Freezer III 360 A-RGB White
PSU: Corsair RM1000X full modular
Fans: be quiet! Light Wings White 120mm
0:00 Intro, Parts
0:41 CPU, RAM, M.2 SSD
1:02 Replacing the case fans
1:45 PSU
2:13 Motherboard
2:37 AiO Arctic Liquid Freezer III
3:13 Connecting cables
3:23 Vertical GPU bracket and GPU
3:39 White cables and aligning cables
4:00 First final look
4:12 Corsair Dominator Platinum
4:20 finishing the build
4:50 System is Ready!
5:57 Benchmark Results: Fire Strike
6:10 Time Spy, Port Royal, Speed Way - เกม
Finally because od your incredible build i found out that Arctic freezer III 360 will fit in h6 flow
How
Yes it fits!
The only problem was the motherboard which is a millimeter to big because of the decoration cover on the left side at the rear panel which touches the radiator.
Hence i was only able to use the middle screw holes of the radiator. You will Not have such a problem with motherboards with a smaller cover.
@@Stephan-sPCCornerWill the MSI B650 GAMING PLUS WIFI work?
@KEVIN.44 I can not say for sure. The decoration cover from the MSI MEG X570 Unifyis is quite big. I assume that the decoration covers of other motherboards are a little bit smaller. We are talking about 1mm space.
So basically i assume that there will be no problem with other motherboards. Ultimately i had also no problems, i just wasn‘t able to use the left screw holes from the radiator.
@Stephan-sPCCorner you mean the top middle part next to the io?
Nice build
Thanks!
My man, you are so lucky. Most of the views came to see if Liquid Freezer III 360mm fits in H6 flow (me included). PCPP shows them as invompatible. I saw that you said mobo cover was causing trouble. Do you mean the one on the top middle, next to the io and on top of the cpu socket?
Thank you for your comment! I mean the cover on the left, above the I/O ports. ( grabcad.com/library/motherboard-i-o-cover-1 This example cover is that what i mean)
The radiator touches the cover. It is round about 1mm too far forward. Hence i was only able to tighten the middle holes
Do you think i could squeeze a gigabyte z790 ud ac in there with this cooling?
I cannot say for sure, i don’t know the z790 from gigabyte in reallife, only on pictures.
I wasn‘t able to use the left and the right screw holes from the 360mm radiator. Only the 4 in the middle. But ultimately it worked and it’s firmly tightened.
A lot of other people had problems and were not able to mount this radiator.
Do you think I could squeeze a gigabyte z790 aorus pro x ddr5 in there with this cooling top mounted like you?
Hi Bubert94,
I can not say for sure. The decoration cover from the MSI MEG X570 Unify is really big. I assume that the decoration covers of other motherboards are a little bit smaller. We are talking about 1mm space.
So basically i assume that there will be no problem with other motherboards but i also don’t know all motherboards. Ultimately i can say i had „actually“ no problems, i just wasn‘t able to use the left and right screw holes from the radiator.
I haven‘t seen a z790 aorus pro x in real life yet, only pictures. It looks like the decoration cover is a little bit smaller. So i would assume that you will have no problems.
Ok, thank you very much! Btw just so you know you made a magnificent build!
@@Bubert94is it fine with u now?
Did you need any adaptors to make the aio rgb
work?
No, just connect all cables to the motherboard and that’s it. It works with msi mystic light, Signal RGB and some other rgb software
What intake fans do you have on the side?! Also why not intake fans on the bottom?
Side fans are:
be quiet! Light Wings White 120mm
On the bottom was no space due to the vertical gpu bracket.
do you think a b650 aorus elite ax v2 will fit?
Hi BeastRusher509,
I can not say for sure. The decoration cover from the MSI MEG X570 Unify is really big. I assume that the decoration covers of other motherboards are a little bit smaller. We are talking about 1mm space with the MEG X570 Unify.
So basically i assume that there will be no problem with other motherboards but i also don’t know all motherboards. Ultimately i can say i had „actually“ no problems, i just wasn‘t able to use the left and right screw holes from the radiator.
I haven‘t seen a b650 aorus elite ax v2 in real life yet, only pictures but I would assume that you will have no problems.
what gpu bracket was used on this one?
Rebel C Series from Sharkoon.
Sorry for asking but do you think the ASUS ROG STRIX B650E-F GAMING WiFi will fit?
You mean in combination with the Arctic Freezer III?
I wasn‘t able to use the left and the right screw holes from the 360mm radiator. Only the 4 in the middle. But ultimately it worked and it’s firmly tightened.
The decoration cover from the MSI MEG X570 Unify is quite big. I haven’t seen a ROG Strix B650E-F in real, only on pictures, so i can not give you a 100% guarantee but i assume it would at least fit like in my case by using the middle screw holes.
Did you try fitting it and did it work?
@@ShihamIslam no I didn’t i bought a deepcool ls 750 zero dark instead didn’t want to risk it, because according to NZXT You can’t install a radiator thicker than 30mm in the NZXT H6 and the arctic is 38mm so i went with 27mm just to be safe.
Feel free to ask me anything.
@vvvlTheHerolvvv did you check how much headroom was available after you installed the radiator