hey mate, nice channel and thanks fpr sharing all these videos. quick question tho - how do I get the clutch master cylinder out? Unbolt from inside, remove the pedal clip and then does it come off from the bottom or can I remove it from the top? is there room enough to undo the feed line and the line to the slave working from the top?! Thnx bro. Cheers
Thanks mate for a positive feedback 😉 clutch master cylinder you gonna remove it outside on the hood 😉 you can undo the line if you have a proper tools 😉
Good Job man im doing the clutch on my getz 2006 model as well atm not as bad damage as that one tho my clutch is gone tho haha i got a heavy duty clutch kit coming :)
If stuck on gear mate that’s a different problem mine is wont go in on the gear when car it’s running, your maybe a transmission problem not a clutch 😬
My car slave cylinder leaked and replaced now but the clutch don’t go down all the way now it only go down 3 quarter and then locks up ??? Please advise what it could be ? Will be great help. Thanks
sir Oliver gud evening,can i ask you for help bcause my hundai getz 1.3 model 2005. also had a problem in transmission releas bearing. were i can buy and how much? pls reply Sir i need your help. God Bless you.
Hnd po ako sir 😉 alipin lng po tayo ☺️ you can call a spare parts for thề actual price of the parts mate and if you replace the bearing you need also to replace the whole clutch kit thát standard when you replaced the clutch for my parts price here at my place is around 200-300 dollars depend on the brand 😉 have a lovely day God Bless 😇
Hello Oliver! Greetings from Venezuela. I have a hyundai Getz 2007 1.3 manual and I'm having a problem. I hope you can help me. I've changed the kit but when the guy install it.. the car has clutch for a few moments and we can drive for a few moments and then the clutch is lost again. I don't know what to do..
You can adjust that mate at the bottom of the clutch pedal there is a nut on the rod you gonna losen the nut and spin the rod to adjust but be careful you will burn your clutch if it’s not the right hight 😬
my shifting gear have a problem, when the car still cold. the shifting gear won’t go in to the gear that i want. and after the engine is hot, the shifting can barely go to the shift that i wanted. is there a solution because before fixing the bearing, the shifting gear can go easily, but after fixing the bearing. shifting gear got a problem, the clutch pump already clean, and the hoes already clean. is there a solution for this?
Thank you
My car fixed by your video
Thank you again
Thanks Oliver, always making sure my getzy is fixed, not her fault shes getting old, but always troubleshooting fast and fair price my friend🙂
Thanks my best friend 😍 really appreciate your positive feedback 😍
hey mate, nice channel and thanks fpr sharing all these videos. quick question tho - how do I get the clutch master cylinder out? Unbolt from inside, remove the pedal clip and then does it come off from the bottom or can I remove it from the top? is there room enough to undo the feed line and the line to the slave working from the top?! Thnx bro. Cheers
Thanks mate for a positive feedback 😉 clutch master cylinder you gonna remove it outside on the hood 😉 you can undo the line if you have a proper tools 😉
Hi Oliver. I have Getz 1.1 petrol. Is hydronic clutch adjustable on then or not ? Please advice
Im not quite sure about 1.1 mate in my place we have 1.6 1.8 and 2 L 😬 but all model is adjustable clutch on the pedal
Good Job man im doing the clutch on my getz 2006 model as well atm not as bad damage as that one tho my clutch is gone tho haha i got a heavy duty clutch kit coming :)
Hi Oliver, I have a terracan,that is stuck in gear,any tips?. Michael, Ireland
If stuck on gear mate that’s a different problem mine is wont go in on the gear when car it’s running, your maybe a transmission problem not a clutch 😬
Hi Oliver, my Hyundai getz is very noisy and shaky. could new engine mounts fix the noise and shaking?
Possible mate it will fixed because it common on getz the engine mount problem 😬 but its a different noise on the video
Hyundai Getz Engine Mount, Steering Belt Replacement
th-cam.com/video/TwkW7_WKw0I/w-d-xo.html
I have a video how to replaced the engine mount 😉
thanks brother
@@oliverthemechanic8532
My car slave cylinder leaked and replaced now but the clutch don’t go down all the way now it only go down 3 quarter and then locks up ??? Please advise what it could be ? Will be great help. Thanks
I think u can adjust it by adjusting the clutch pedal rod
If the shaft is damaged can it be replaced, ir does the transmission have to be rebuilt?
What shaft mate the one that hold the release bearing?
Yes
@@ELCLAVE300 😬 you need to rebuild that one mate 😬 or better buy a second hand transmission 😉
sir Oliver gud evening,can i ask you for help bcause my hundai getz 1.3 model 2005. also had a problem in transmission releas
bearing. were i can buy and how much? pls reply Sir i need your help. God Bless you.
Hnd po ako sir 😉 alipin lng po tayo ☺️ you can call a spare parts for thề actual price of the parts mate and if you replace the bearing you need also to replace the whole clutch kit thát standard when you replaced the clutch for my parts price here at my place is around 200-300 dollars depend on the brand 😉 have a lovely day God Bless 😇
Hello Oliver! Greetings from Venezuela. I have a hyundai Getz 2007 1.3 manual and I'm having a problem. I hope you can help me.
I've changed the kit but when the guy install it.. the car has clutch for a few moments and we can drive for a few moments and then the clutch is lost again. I don't know what to do..
Greetings mate the fluids of the clutch reservoir is ok or in not empty?
Can I see a clutch and flywheel change,on a Hyundai terracan 2.9
Sorry mate i don’t have a video on that 😬
Ouch the throw bearings
😅
Sir ask when shifting to 1st gear there’s a grinding sound while driving then it’s needed to stop shift smootly. TIA
I think it’s a clutch kit problem also mate 😬
I change clutch kit but still have that problem
Bring it to mechanic mate maybe the whole transmission already is the problem 😬
Hey brother my getz clutch pedal is higher than my brake im wondering how to adjust it
You can adjust that mate at the bottom of the clutch pedal there is a nut on the rod you gonna losen the nut and spin the rod to adjust but be careful you will burn your clutch if it’s not the right hight 😬
If i do a clutch adjustment i will make a video of that 😉
my shifting gear have a problem, when the car still cold. the shifting gear won’t go in to the gear that i want. and after the engine is hot, the shifting can barely go to the shift that i wanted. is there a solution because before fixing the bearing, the shifting gear can go easily, but after fixing the bearing. shifting gear got a problem, the clutch pump already clean, and the hoes already clean. is there a solution for this?
If bearing is broken mate you need to replace also the clutch kit 😬 not only the bearing 😬 it sounds that u have a clutch problem 😬
Hi Oliver mine has unsual sound when on idle but it is gone whenever i press the clutch pedal
It’s starting the broke the release bearing maté that’s the sign already 😬
@@oliverthemechanic8532 thank you kabayan
Thanks din po 😉 medyo mahal po yang trabahong yan 😬 saan po ba kayo ngayon nakatira?
@@oliverthemechanic8532 dito ko ngaun sa mackay Queensland
When replacing gear lever on the gearbox show procseger
sorry mate i dont know what u mean 😬