1989-2001 Jeep Cherokee XJ 4.0L Performance Aluminum Fan Shroud Installation Guide by Mishimoto

Product Page: www.mishimoto.com/jeep-cherok...
Facebook: / gomishimoto
Twitter: / mishimoto
Instagram: / mishimoto
Engineering Blog: engineering.mishimoto.com/
• Direct-fit for 1989-2001 Jeep Cherokee XJ w/ 4.0L engine
• Includes three Mishimoto high-flow 10" slim fans
• Each fan flows 950 CFM
• Increases airflow through the radiator by 41.9% over stock at idle
• Eliminates heavy mechanical fan to improve low-speed airflow, reduce rotating mass, and free up power
• Lightweight aluminum shroud improves airflow coverage across radiator core
• Retains stock A/C fan control for proper A/C function
• Includes A/C fan jumper to connect Mishimoto fan to 1997-2001 models
• Available fan controller features adjustable activation temperature and includes wiring harness, NPT temperature sensor, and probe temperature sensor
• Mishimoto Lifetime Warranty

[@orionoutdoorsandworkshop5617]

i have never seen an xj as clean as this one is.

[@haydencrume3472]

I wish I didn’t have to read subtitles. I prefer someone talking vs pretty music playing with subtitled instructions , personally

[@abrahammuno4444]

Are these brushless fans or do you have the option to get the fan shroud with raceline high performance fans? I have an ls swapped jeep XJ struggling to keep cool in az weather. I have Novak radiator with their fan setup and at 550 cfm on each of the 3 fans is just not enough

[@mishimoto]

We unfortunately do not offer the fan shrouds with out heavy duty fans as they bolt pattern is slightly different due to the larger size

[@anthonycaudill8179]

You should get Mishimotos radiator and thermostat. My Jeep has zero issues cooling. And then they came out with their fan shroud system after I already bought K-Suspensions triple fan setup :(

[@Dripix-uo1nu]

Can you mount the fan to a stock radiator

[@mishimoto]

The fan should fit onto the stock radiator and our radiator.

[@jacklaster8203]

Would this work with your guys race fan

[@mishimoto]

This is not designed to use the race HD fans. Sorry!

[@chpalmer2007]

Thanks guys. You should never use Teflon tape on brass adapters. Instead use Teflon paste. Tape can crack the brass. :)

[@MurdocMack]

What temperature range do you recommend to set them to come on?

[@mishimoto]

This would highly depend on the thermostat being used among other a few other factors. For example, if a 180° F thermostat is being used, the fan threshold should be above 180°.

[@laaaaaaaalaaaaaaaa]

I'd like to know as well if these are brushless motor fans.

[@mishimoto]

These are not brushless motors.

[@landryfultz2653]

It doesn’t fit the stock radiator very well.