How to put 26 inch rims on correctly on Old School Cars

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ม.ค. 2025

ความคิดเห็น • 65

  • @xaviermcfadden1
    @xaviermcfadden1 3 ปีที่แล้ว +3

    Good info, it’s 1000 ways to put wheels on the car it’s all about what are you looking for (show car) or (street Cruiser) Most important thing is getting the right wheel fitment for your car

  • @jahfiyah619
    @jahfiyah619 3 ปีที่แล้ว +2

    I have alot to learn. He showed me that. The fender adjustment was smart bro

  • @beattheiphz7319
    @beattheiphz7319 3 ปีที่แล้ว +3

    How is the ride? Feel bumps? Stiff? I know the less tire, the harsher the ride, do the air shocks help? I don’t want to compromise the ride to just look good.

  • @josephwilliams3005
    @josephwilliams3005 4 ปีที่แล้ว

    Thanks for this video I just put shocks and cups on my Roadmaster thos video helped a lot

  • @dreyoung2763
    @dreyoung2763 4 ปีที่แล้ว +5

    Nice ride with your set up did you have to get your frame notched?

    • @v8ryderzautoclub113
      @v8ryderzautoclub113 2 ปีที่แล้ว

      That’s what I wanna know he didn’t mention that in video but I’m pretty sure he did

  • @boisywalker251
    @boisywalker251 4 หลายเดือนก่อน +1

    How much would you charge me to raise my 1995 Chev Caprice for 26in rims

  • @logantorres7001
    @logantorres7001 3 ปีที่แล้ว +2

    Chido amigo ..coool info..chido chido compa

  • @TwoDeep2
    @TwoDeep2 2 ปีที่แล้ว

    Awesome video

  • @lowkey2830
    @lowkey2830 7 หลายเดือนก่อน

    Great video

  • @EBell-bh3gh
    @EBell-bh3gh ปีที่แล้ว

    Bro them irocs looking good

  • @cartiermarco4468
    @cartiermarco4468 3 ปีที่แล้ว

    Great video with some good information…I have a 1974 Cadillac Eldorado Convertible, that is fwd. I put some 22 inch Rucci wheels, do I need to put on some rear trailing arms to eliminate the little scrubbing that I have?

    • @cartiermarco4468
      @cartiermarco4468 3 ปีที่แล้ว

      I also have a 2 inch lip in the front and 2.5 lip on the rear. The rim size is 22x10

  • @itsmejones9983
    @itsmejones9983 4 ปีที่แล้ว +2

    I’m trying to put 26” on my 86 where did you get everything done at

  • @keithmarshall774
    @keithmarshall774 3 ปีที่แล้ว

    I have a 1970 Shylark that got 24 inch wheels. Were did you get the coil springs and coilovers.

  • @antwanhodges2728
    @antwanhodges2728 ปีที่แล้ว

    Where did you get your wheel studs from

  • @juansalazar9156
    @juansalazar9156 ปีที่แล้ว

    2:43 what brand long arm kits are those and did you have to change your springs and what kind of car is it

  • @walkthemile6969
    @walkthemile6969 4 ปีที่แล้ว +1

    Great informative video. Thank you

  • @josephwilliams3005
    @josephwilliams3005 3 ปีที่แล้ว

    Awesome I will do the same with my Roadmaster with putting air shocks on back

  • @dugyfresh292
    @dugyfresh292 ปีที่แล้ว

    So clean

  • @heavygunz0331
    @heavygunz0331 2 ปีที่แล้ว

    Could you assist me if possible? I Volunteer for Compton Veterans and I'm trying to get my old school ready for Parades and Veteran Ceremonies. I have 22" Rims that are universal Rims. But they don't fit on the Lugs of the 1969 Pontiac Grand Prix Model J, what can I do, to get them to fit. What's the Process.

  • @MoneyAllCashFon
    @MoneyAllCashFon 4 หลายเดือนก่อน

    Bro where you at I see you have not posted in a while are you still into lifting cars the right way

  • @90boy90
    @90boy90 ปีที่แล้ว

    So no lift just air shocks on rear?

  • @slimtouv1050
    @slimtouv1050 3 ปีที่แล้ว

    And great informative video 👍

  • @vgslife9640
    @vgslife9640 4 ปีที่แล้ว +1

    great video bro and clean car homie.. on the axle, do you have rear lower adjustable trailing arms?

  • @byronbrown5767
    @byronbrown5767 4 ปีที่แล้ว +7

    You mean to tell me that you did ALL of those upgrades, made ALL of those suspension modifications and didn't put some type of big brakes on it???? You do realize that stopping is important as well don't you?

    • @KingJT80
      @KingJT80 4 ปีที่แล้ว +2

      you dont need BIG brakes. he could just do an s10 rear disc conversion and that will be more than enough to stop the car with the proportioning valve adjusted correctly. everyone wants to spend 3000.00 on wilwood and baer brakes. way too much money for something like this

    • @byronbrown5767
      @byronbrown5767 4 ปีที่แล้ว +1

      @@KingJT80 Yo.... all y'all need to realize and recognize that the bigger the rims are, the bigger the brakes NEED to be in order to stop your ride without rollin' 1000 feet BEFORE stopping.... nah'mean??? Besides, if you spendin' that much money on upgrades and modifications, $3000 ain't shit to spend.... nah'mean!!!!

    • @xaviermcfadden1
      @xaviermcfadden1 3 ปีที่แล้ว +2

      Byron Brown Man you don’t know what you’re talking about you don’t need no big brake kit just because you put wheels on your car, unless you’re running 1000 hp motor or something it’s all about the look people see those big brakes and they know thats money that’s the only reason

    • @jarriouscoleman1465
      @jarriouscoleman1465 ปีที่แล้ว

      ​@@xaviermcfadden1nah, might be expensive but bigger brakes are always a way better decision when installing bigger wheels bruh, it doesn't have to be all that expensive but you want to always know that the correct braking power is there if needed, every guy I know that has upgraded to big wheels and didn't do the brakes ended up hitting something at some point because the car wouldn't stop in time. Always remember, bigger wheels require better brakes,,,plus,,,,,drum brakes are just shit and horrible to look at,,,,I hate em

  • @jamesclarkii5331
    @jamesclarkii5331 3 ปีที่แล้ว

    I put 24s on 78 Malibu and its bouncing everywhere. I had the whole suspension replaced and frame notched..what can I do to elevate the bouncing..???

  • @mrhaynes1974
    @mrhaynes1974 3 ปีที่แล้ว +1

    D bruh I'm Antoine I did the same thing you did but I'm having problems with my front end like can you make a full u-turn ?

  • @cortezharris2485
    @cortezharris2485 2 ปีที่แล้ว

    Wht was your front spring height. Mines 17" but my 24's still rubbing a Lil

  • @al-mubdizahir8704
    @al-mubdizahir8704 4 ปีที่แล้ว

    i have an 04 crown vic police interceptor. i want to put 26s on them. what else i need to do to make sure i dont have future transmission problems or rear end problems?

  • @v8ryderzautoclub113
    @v8ryderzautoclub113 2 ปีที่แล้ว

    Did you notch your frame

  • @slimtouv1050
    @slimtouv1050 3 ปีที่แล้ว

    How many inches did he cut off the upper control arms and did you have to cut some off the bottom trailer arms or you left them how they were??

  • @cboyrecords
    @cboyrecords 2 ปีที่แล้ว

    What size are the new studs you bought? I’m trying to find longer studs for my 26’s

  • @darryllgloverjr2688
    @darryllgloverjr2688 ปีที่แล้ว

    What size tires u r running

  • @grouchdouglas5507
    @grouchdouglas5507 ปีที่แล้ว

    Not changing the rear end gear with bigger wheels or tires is where a lot of people go wrong. Bigger wheels require a higher gear. That’s where the trans problems come from

  • @Elcamino80_87
    @Elcamino80_87 4 ปีที่แล้ว

    What type of coil over are used in the front? Part number?
    Thank you

  • @slimtouv1050
    @slimtouv1050 3 ปีที่แล้ว

    How much did your mechanic cut off the upper control arms I'm having a hard time with my pinion angle

    • @JoshuaOlivo-u9h
      @JoshuaOlivo-u9h ปีที่แล้ว

      They look like adjustable upper trailing arms they probably an inch longer than stock ones.

  • @richardmchale2641
    @richardmchale2641 4 ปีที่แล้ว

    Thank you for sharing your information

  • @jaquintastewartrosegold988
    @jaquintastewartrosegold988 4 ปีที่แล้ว +1

    This is soo helpful. I have a 84” Monte Carlo ss and I purchased 24’ Rucci’s and they’re staggered it was touching the frame the back rims. So adapters didn’t work at all. So I’m going to go with air shocks. So will that help me and make sure it don’t touch ? Or do I need to get my car notched??

    • @boss94ways51
      @boss94ways51 3 ปีที่แล้ว +2

      Your back space is wrong...if a wheel is custom made i think a 5in.lip is the biggest you can get on a g body without getting any cutting or a notch to yhe frame...where you dont need adaptor/spacers...u must of gave rucci the wrong measurements....but but them being the maker of the wheel if u told them u wasn't notching the frame they should hv known how to cut the wheel...

    • @milesservices7373
      @milesservices7373 3 ปีที่แล้ว

      I just bought a 84 too i want to put 26s or 28s whats the best and affordable way

    • @jaquintastewartrosegold988
      @jaquintastewartrosegold988 3 ปีที่แล้ว +1

      @@milesservices7373 I had to get my car notched and tucked for my rims to fit. Only because I didn’t get the Custom made for my car. So if you are willing to spend $5000 I suggest you to get them specially made for the car so you won’t have to do a lot to the car to get them to fit. I paid $5000 for my wheels and they were not custom I just wanted to hot wheel city and bought the rims

    • @milesservices7373
      @milesservices7373 3 ปีที่แล้ว +2

      @@jaquintastewartrosegold988 don’t kill me lol whats that the things that go on the springs to Lift it a lil ?

    • @boss94ways51
      @boss94ways51 3 ปีที่แล้ว +1

      @@milesservices7373 those twist in knuckles from autozone

  • @nfbcarriers7493
    @nfbcarriers7493 2 ปีที่แล้ว

    Trying to get my lift and suspension right for my 71 Monte with my mechanic. Please help - I'm willing to pay....

  • @slimtouv1050
    @slimtouv1050 3 ปีที่แล้ว

    I just put mine on from Universal list and my pinion angle won't get right

  • @67corvaircars
    @67corvaircars 4 ปีที่แล้ว

    What is the best offset for big wheels?

  • @vonniecrawford4011
    @vonniecrawford4011 3 ปีที่แล้ว

    How can u install 26in rims on a 1976 cadillac Eldorado

  • @markwillis5472
    @markwillis5472 4 ปีที่แล้ว +2

    A lot to go thru for a look...ijs

  • @kanairsforte23
    @kanairsforte23 3 ปีที่แล้ว

    What size lift

  • @damianvlawgs5642
    @damianvlawgs5642 หลายเดือนก่อน

    Just watched and learned how to do it wrong

  • @RT22-pb2pp
    @RT22-pb2pp 8 หลายเดือนก่อน

    Lol whole rear end brakes suspension it all needs redoing. Them little brakes now have huge rotation al mass to stop. Brakes are now a joke. Car will always ride luke shit as tires havev1 Inc sidewall. Any pit hole rui s those wagon wheels. Sorry there is no corre tvway to.put on street legal car RIGHT.

  • @lamarjohnson1983
    @lamarjohnson1983 2 ปีที่แล้ว

    Yo what’s the best way to contact you?