chain maintenance on a YAMAHA TRACER MT 09
ฝัง
- เผยแพร่เมื่อ 19 มิ.ย. 2020
- YAMAHA Νούλας στα Τρίκαλα
E-shop: noulasmoto.gr/
Τηλ: 24310-77577
I am a motorcycle enthusiastic... I love making videos with scooters and commuter motorcycles and I like to do unboxings... and also I travel a lot... and this is how travel moto exists.
#########################
Travelmoto on FaceBook:
/ travelmotoyoutube
Travelmoto on Twitter:
/ travelmotro
####################
My other channels:
my channel with scooters walkaround
/ @travelmoto-tv
my channel with motorcycles walkaround
/ @power-moto
#############################
The Music in my videos is from filmmusic.io by Kevin MacLeod
License: CC BY (creativecommons.org/licenses/...) - ยานยนต์และพาหนะ
Wow, you should've used the whole can. I don't think you put enough on.
😂😂
Some stiff links there - you can see them at around 0:45
So what should you tighten first, the adjusters pinch bolts or the axle nut?
Thanks for the video
Αυτα τα γράσσα δεν πέφτουμε πάνω στην εξάτμμιση και ζάντα;
Stiff link there looks seized
Χαίρετε,what brush do you use there to clean the chain please..?✌🏻
Για wd 40 το εκοψα
Και μετά μας φταίει η αλυσίδα αφού δεν την πλένουμε ποτε τη περιμένουμε μετά
The chain is bad. Your cleaning is bad. Your adjustment is bad you need to measure it especially on a tracer since its different. And you dont know how to use a torque wrench pls never touch bikes again
Hi my friend I see your comment I would like to ask something. I have a Yamaha Mt 09 and the manufacture adjust is 5.0 to 15.0mm but if I put second person is to tight hat must I do thanks
@@dionyshsde4573 hey that's right the factory adjustment stated in the manual is wrong. They changed it to 25 +- 5 in the new books. I would recommend a total of 25mm when your bike is on its side stand. Good luck hope you will find this useful.
@@wauter2000 tell me about the second person if I put someone it is too tight
@@dionyshsde4573 that's a weight issue perhaps. You can give it some extra slack but I would not recommend that. Try your pre load of the spring. Spring adjustment should be done for a second rider but doing it every time you got a buddy is not nice. Try to find the balance
@@wauter2000 perfect answer thanks 👍
not enough knowledge to set cahin range so if you do it by own you have to read owner manul because chain working range could be 15-50 mm also tork wrench doesnt use pull bolt out.