Hi, my name is Joslyn Hamilton and I'm living in Jamaica. I want to same a BIG thank you for sharing your video. I had an issue with my Washer and I remove the device as shown in your video and replace it with another which I remove from an old Machine outside my home and it worked. Thank you very much now, my wife, is happy again.
Good Afternoon Ravi, thanks for easy to follow video. i fixed machine spin by swapping hot water hot inlet valve( never used ) with the cold water inlet valve. i saved money. Keep up good work. We pray GOD Bless all with good health, happiness and prosperity.
Hi thankyou ... Even I had the same problem I had called LG SERVICES they had come and just saw n told it may cost 4000 rs . I was fed up as they didnt even check any thing .. then I saw your video and I only removed and bought it from nearby shop it cost me just 400 rs and I followed you step and the problem is sloved thank you very much ... I payed 400 for lg service just for the visit that to waste of money
I had the same problem. I just removed the 2 screws in the sensor and dismantled and manually pulled and released the white plastic valve to release any debries and then assembled and fitted the screws tightly again. Now it works. Reason may be dust or loose screws.
Sir, thank you so much, my washing machine also same problem, in water level sensor, if your guidance I replaced that sensor, now it Will work good, Thanks.
Welldone sir the video you posted about linkage water turbodone machine 13kg.0 have the same issue, that is not understood enough to solve the problem,that is why I messaged you to help me out
Sir. I check everything. But my machine ok only spin not working I follow up according to ur said water inlet solenoid valve second I check water level by multimetre. It's showin reading like 23/22 ohm. Nw wat to do. Thank u very much. Giving me ur precious time. Love u sir
Sir ur simply good. Nicely you explain all in detail. Even my sansung machine have spin problem. N I check with water inlet. But still showin problem. N stoped at 7 reading. Can u suggest me some more ideas plz. My machine is samsung diamond 💎
check water intake valve solenoid and water level sensor first. these two components can basically affect to spin function. if they are ok check water drain valve motor.
Same error occurred in fuzzy logic 7.5kg machine. The guy who checked and said that need to replace the board. All function work but after rinse function spin not working and water not goes out. What should i do
Thank you so much I hope you could help me. I have LG Fuzzy logic 7.5KG. The washing machine is working perfectly until reaching "Rinse" Then its gives error message "IE" The only thing I could do right now is bypass Rinse manually and go directly to Spin. Its strange because the water is coming normally when I start the machine ( wash) but when it reaches Rinse the water is very very slow and then it gives Error IE.
I checked the water level sensor and there was no problem with it. But what i've noticed was all 3 terminals got live phase on them. Is that a problem or is that normal?
Sir secondly. Der is no current supply coming in middle one wire. Tat I notice frm other door close switch. Which bypass supply not flowing in tat sensor. Tat mns mayb tat fault wat
Dear ravi my LG intellowash 7kg top loader fully automatic is working both side when bigining for time. After washing spinning not working only noise come from machine. Is it same switch can replace for this issue,
In LG 6.2 kg Fuzzy logic Fully automatic washing machine (T7222PFFC), If the motor & drum are running in Spin mode but not working in WASH mode, what will be the problem?
@@ravifixall sir I'm also having 6.5 kg fuzzy logic..it takes water n drains properly..but in the wash n rinse mode it just moves the drum, clock n anticlockwise(shake only) not like the strong movement which actually to be happened even motor sound is not there. But the final spin functions properly. What may be cause of slow wash n rinse..plz help..thank you in advance.
My LG Washing machine turbo from FUGIOLOGIC 6.2 function all well and clothes get tangled every time in final spin stage and cloth do not get fully drained .its watery watery
Tangling is normal at the final spin when put all long and short dresses together. But it shoud get dry. Just try to notice if it low spin speed. You can try put low amount of clothes...
My washing machine turbo drum FUGIOLOGIC five years old. Till last six months it was working fine. All is fine when I switch FUZZY button and water full drum. But during other button use like quick wash with lower water level this tangling happens. Spin speed is okay. But cloth will be still wet.
UE error mean the load not balance. Try with low weight of cloth, if same situation you need technician's assistance. May be PCB fault. academy.fredsappliance.com/washer-training/8-steps-to-fix-lg-washer-ue-error-code/
Sir my lg washing matchin not working I forget to open water tap and I state the matchin now its not waking display showing 14 F.what can I do this falt
I have LG Fuzzy logic 9kg washing machine. It stop at rinse mode then not drain water. I can heard tik tik sound coming from machine too.What is the possible error. Is it in water level sensor.
Hi your videos are awsome,, my LG fuzzy 5.5 top loading Rinse. &. Spin not working , I can hear the Drain motor sound only but drum not rotating and no water intake during rinse. While washing is ok also it drains after washing. Do you think it is the sensor issue ? Tks in advance
Thank you. Check bothe water level sensor switch and drain valve motor. This error could occur due to malfunctioning of above both components. However PCB also might be a the fault maker.
Ravi Fix Tks a lot for the quick response. PCB 😩 ....will cost a lot then. I have checked the gear drain motor which is moving back ward while press spin switch and forward when power off (so it is working right ?) The celloid switch bypassed by removing the connection but it is same . So I have to buy a sencor tomorrow morning to try. Any other suggestions plz ? I wish I could communicate with you in whats aaap Tks Ravi
Ravi Fix hi Change the sensor today but it same .. Drain motor working properly... Any sugesstions plz...still it is doing the wasing mode but no rinse no spin
Ravi Fix good morning. Whater sensor and drain motor are perfectly working. I have noticed that main motor not rotating in spin mode but when I remove the belt motor is working. So is it from the motor or gear box ?
Hello Ravi, i have same LG 7.0Kg machine and having problem of not washing off the water automatically. Removed the water level sensor and pluged in again. Now water flows in, but no drains out. Can u help me? Thanks
I was happy about your video because I have the same problem with my lg I did everything like you but the SPIN still doesn't work What else can it be where i can order the waterlevel sensor, the magnet, please urgently for your help dear greetings ewald
@@ravifixall i have found this pump... but is this correct.. www.ebay.ph/itm/For-LG-Drum-Washing-Machine-Water-Drain-Pump-Motor-BPX2-111-112-Part-Replacing/303575210605?hash=item46ae7e1a6d:g:c70AAOSw8Ehex6Hw
fully automatic washine machine. spining without stopping when press the power button. other functions are not working when press those buttons. so only work power button. how to fix this?
Mostly this error might happens due to faulty water level sensor.. first try disconect the wire connection of water level sensor. Then if you get error code and no any function, hi possibility to being faulty water level sensor. If happens same thing affter disconect wire connection of the water level sensor, have to check.
Hi all, Asp per my option if your are machine out of guarantee so you have to take outside from lg as you are aware ther are taking visiting charging near about 600 soothing n after that the product installed it will increase near about 2000 so why don6 take outside service sheom you believe he can do it right way
In my case all functions are working properly except Spin function. I've checked drain motor, drain water is working properly. What else could be causing problems??
Hi Ravi....my LG WFSL1632EK top load washer is not functioning properly after i attempted to wash a fleece blanket in it. The drum only turns anti clockwise when washing and it does not spin dry at all because the drum cannot turn in a clockwise direction...any help would be appreciated..thanks
drain valve motor also might be a reason, but before replace any part check it properly, many supportive vedios available in youtube. PCB also a check point for this issue.
Hi Ravi Fix. My LG Fuzzy Logic 6.5kg is not working properly. It is not spinning at all in any mode. Wash mode takes water but no spin. Spin mode drains water but no spin. Please what could be the problem? Thanks.
There is a high possibility to have an error in water level sensor as discribe in this video with your problem, but you need a new sensor and replace it to check it out.
एलजी की फुल ऑटोमेटिक मशीन है उसमें पानी पूरा भर जाता है और पानी बाहर आने लगता है मशीन इन थे पीछे से नल बंद कर देते हैं तब मशीन में पानी आना बंद हो जाता है है क्या प्रॉब्लम है
Sir ..in LG machine as soon as I press wash button, the water dispensing motor activate and realese all the water and when water finished in drum the valve close . What can be the error?
My TOP Load LG washing is working fine except spinning. During spinning there is motor running sound but not actually spinning. Is it belt issue or any thing else? Thank you..
![เปิดใจ พี่ญา คนรุม หลังทัวร์ลง หนักสุดในชีวิต!! l [Nickynachat]](http://i.ytimg.com/vi/2-OJZRtclro/mqdefault.jpg)
Hi, my name is Joslyn Hamilton and I'm living in Jamaica. I want to same a BIG thank you for sharing your video. I had an issue with my Washer and I remove the device as shown in your video and replace it with another which I remove from an old Machine outside my home and it worked. Thank you very much now, my wife,
is happy again.
Good Afternoon Ravi, thanks for easy to follow video. i fixed machine spin by swapping hot water hot inlet valve( never used ) with the cold water inlet valve.
i saved money. Keep up good work. We pray GOD Bless all with good health, happiness and prosperity.
Hi thankyou ...
Even I had the same problem I had called LG SERVICES they had come and just saw n told it may cost 4000 rs . I was fed up as they didnt even check any thing .. then I saw your video and I only removed and bought it from nearby shop it cost me just 400 rs and I followed you step and the problem is sloved thank you very much ...
I payed 400 for lg service just for the visit that to waste of money
Congratulations for your method of explaining clearly , that too in english so that all can understand. Keep it up
I was able to fix my washer after watching your video.
Thank you so much for your sharing of idea it is very big to those using LG washing machine
Super explanation 😃
Augustine violinist from Malaysia
Very helpfull .thank u very much i fix my LG smart inverter not spinning...bec of this vlog..thank u very much...god bless...from: philippines
Thanks for the videomore power & GOD Bless
I had the same problem. I just removed the 2 screws in the sensor and dismantled and manually pulled and released the white plastic valve to release any debries and then assembled and fitted the screws tightly again. Now it works. Reason may be dust or loose screws.
Which screw sir
Two small aluminium screws in the white plastic casing of the sensor
your solution works appreciate sharing it with everyone.
THANK YOU very much boss keep up the good work
Thank you more help full
Sir, thank you so much, my washing machine also same problem, in water level sensor, if your guidance I replaced that sensor, now it Will work good, Thanks.
Sir. My washing machine also some problem..and drawin water pipe continue going water
P
Welldone sir the video you posted about linkage water turbodone machine 13kg.0 have the same issue, that is not understood enough to solve the problem,that is why I messaged you to help me out
Small problem nicely explained
Sir. I check everything. But my machine ok only spin not working I follow up according to ur said water inlet solenoid valve second I check water level by multimetre. It's showin reading like 23/22 ohm. Nw wat to do. Thank u very much. Giving me ur precious time. Love u sir
great machan.. keep it up. patta
Thank you sir
What is the price of water level sensor? Super explanation,
So how much is it
My machine has the same problem, I'll try this ....
Sir ur simply good. Nicely you explain all in detail. Even my sansung machine have spin problem. N I check with water inlet. But still showin problem. N stoped at 7 reading. Can u suggest me some more ideas plz. My machine is samsung diamond 💎
check water intake valve solenoid and water level sensor first. these two components can basically affect to spin function. if they are ok check water drain valve motor.
Thanx bro
Thanks master well nead powers problem sir
Thanks for videos
When u test sensor old and new value ohm the same ,let me how to know value good or bad?
Hi sir nice video sir plz upload fullyautomatic convert to samiauto matic video
Thanks
Thanks young man.
Tq sir
Very useful video
If both had continuatity then how do tell if it's faulty without a new one?
Hi sir, my washing machine godrej , my problem is when spin mode it's run 50sec ater power fully shutdown power
Sir jo apne phle wire btaya usko separate kia
And then again join kia
Phir start ho gya spinning drum
Abhi kya problem ho skti hai
Plz btaye
Same error occurred in fuzzy logic 7.5kg machine. The guy who checked and said that need to replace the board. All function work but after rinse function spin not working and water not goes out. What should i do
Need to proper check. Low possibility to be a bad controller board.
Thank you so much
I hope you could help me.
I have LG Fuzzy logic 7.5KG.
The washing machine is working perfectly until reaching "Rinse"
Then its gives error message "IE"
The only thing I could do right now is bypass Rinse manually and go directly to Spin.
Its strange because the water is coming normally when I start the machine ( wash) but when it reaches Rinse the water is very very slow and then it gives Error IE.
Check water intake valve solenoid and water level sensor.
I checked the water level sensor and there was no problem with it. But what i've noticed was all 3 terminals got live phase on them. Is that a problem or is that normal?
ගොඩක් ඉස්තුතියි.
I have the same problem with my lg inverter too is it okay to buy a different model number of this sensor but they are exactly the same in design?
Sir secondly. Der is no current supply coming in middle one wire. Tat I notice frm other door close switch. Which bypass supply not flowing in tat sensor. Tat mns mayb tat fault wat
Thank you
Also door closer switch have no supply showin can u explain me. Mayb it's frm PCB Ic faulty
Dear ravi my LG intellowash 7kg top loader fully automatic is working both side when bigining for time. After washing spinning not working only noise come from machine. Is it same switch can replace for this issue,
This is a one possible cause. But some other reasons could cause to stop spinning. Hard to say something without inspection.
@@ravifixall Thank you for your reply
What is the defect that the start button does not work please help.
Boss if the pressure switch faulty then how the wash function work?
Thanks sir you teach me right,i replace the water sensor,
my LG automatic washing machine is working.
Salamat
You need check capacitor on 2nd pin. It should have 30-55nf capacitor to left and right pin
How much voltage of input of the water sense ?
I have super general wash machine
In LG 6.2 kg Fuzzy logic Fully automatic washing machine (T7222PFFC), If the motor & drum are running in Spin mode but not working in WASH mode, what will be the problem?
Check both water intake valve and water level sensor, because these tow component might bring such kind of errors as you discribe.
@@ravifixall sir I'm also having 6.5 kg fuzzy logic..it takes water n drains properly..but in the wash n rinse mode it just moves the drum, clock n anticlockwise(shake only) not like the strong movement which actually to be happened even motor sound is not there. But the final spin functions properly. What may be cause of slow wash n rinse..plz help..thank you in advance.
Sir gearbox kharab hone se bhi spin nahi chalta kya
Where do i get parts of this lg washing machine here in manila
My LG Washing machine turbo from FUGIOLOGIC 6.2 function all well and clothes get tangled every time in final spin stage and cloth do not get fully drained .its watery watery
Tangling is normal at the final spin when put all long and short dresses together. But it shoud get dry. Just try to notice if it low spin speed. You can try put low amount of clothes...
My washing machine turbo drum FUGIOLOGIC five years old. Till last six months it was working fine. All is fine when I switch FUZZY button and water full drum. But during other button use like quick wash with lower water level this tangling happens. Spin speed is okay. But cloth will be still wet.
My lg 7.5 kg wasing machine wash its a slow but spen is a fast work so what the problem
Wash is not as fast as spin mode.
How check water level sensor
Sir same problem with me .may LG Fuzzy logic.65 every thing working Good.when come rinse UE error are coming.
UE error mean the load not balance.
Try with low weight of cloth, if same situation you need technician's assistance. May be PCB fault.
academy.fredsappliance.com/washer-training/8-steps-to-fix-lg-washer-ue-error-code/
@@ravifixall ravi sir i tryed 5 time low weight set balanced evry thing but not fix.washer working Good butt rinse time ue error coming
Sir my lg washing matchin not working I forget to open water tap and I state the matchin now its not waking display showing 14 F.what can I do this falt
My washing machine spin not work can you help me
Check solenoid coli n pressure sansor also
ربنا يوفقك ويحفظك
I have LG Fuzzy logic 9kg washing machine. It stop at rinse mode then not drain water. I can heard tik tik sound coming from machine too.What is the possible error. Is it in water level sensor.
First check drain hose clogged or drain valve. And also drain valve motor.
Hi your videos are awsome,,
my LG fuzzy 5.5 top loading
Rinse. &. Spin not working , I can hear the Drain motor sound only but drum not rotating and no water intake during rinse.
While washing is ok also it drains after washing.
Do you think it is the sensor issue ?
Tks in advance
Thank you.
Check bothe water level sensor switch and drain valve motor. This error could occur due to malfunctioning of above both components. However PCB also might be a the fault maker.
Ravi Fix Tks a lot for the quick response.
PCB 😩 ....will cost a lot then.
I have checked the gear drain motor which is moving back ward while press spin switch and forward when power off (so it is working right ?) The celloid switch bypassed by removing the connection but it is same .
So I have to buy a sencor tomorrow morning to try.
Any other suggestions plz ?
I wish I could communicate with you in whats aaap
Tks Ravi
Ravi Fix hi
Change the sensor today but it same ..
Drain motor working properly...
Any sugesstions plz...still it is doing the wasing mode but no rinse no spin
Ravi Fix any sugestion appart from this
Ravi Fix good morning.
Whater sensor and drain motor are perfectly working.
I have noticed that main motor not rotating in spin mode but when I remove the belt motor is working.
So is it from the motor or gear box ?
Nice
Super broo tq
Hello Ravi, i have same LG 7.0Kg machine and having problem of not washing off the water automatically. Removed the water level sensor and pluged in again. Now water flows in, but no drains out. Can u help me? Thanks
Check the drain valve motor and drain hose is cloged.
I was happy about your video because I have the same problem with my lg
I did everything like you but the SPIN still doesn't work
What else can it be
where i can order the waterlevel sensor, the magnet,
please urgently for your help
dear greetings ewald
If all the other functions work such as wash, rinse, might be error with water level sensor.
@@ravifixall Thanks a lot for your quick answer
where can i get the water pump
i live in the philippines
@@ravifixall what is the correct english name for the water pump
my language is German
@@ravifixall i have found this pump... but is this correct..
www.ebay.ph/itm/For-LG-Drum-Washing-Machine-Water-Drain-Pump-Motor-BPX2-111-112-Part-Replacing/303575210605?hash=item46ae7e1a6d:g:c70AAOSw8Ehex6Hw
Our automatic LG wM will spinning only in washing mode but it will stop in a few seconds Thanks for what you will advise me to do God bless
Good day Şir what iş the problem of waşhing machine like that ,,no power in the dişplay thank you
Check the fuse located in back top penal.
fully automatic washine machine. spining without stopping when press the power button. other functions are not working when press those buttons. so only work power button. how to fix this?
Mostly this error might happens due to faulty water level sensor.. first try disconect the wire connection of water level sensor. Then if you get error code and no any function, hi possibility to being faulty water level sensor. If happens same thing affter disconect wire connection of the water level sensor, have to check.
Hi all,
Asp per my option if your are machine out of guarantee so you have to take outside from lg as you are aware ther are taking visiting charging near about 600 soothing n after that the product installed it will increase near about 2000 so why don6 take outside service sheom you believe he can do it right way
Pressure switch kharab kese malum padega
In my case all functions are working properly except Spin function. I've checked drain motor, drain water is working properly. What else could be causing problems??
Try with this video
th-cam.com/video/Z8d5btr9nms/w-d-xo.html
@@ravifixall send me vidoe i m facing same problem
Hi our LG top load is shaking a little more. With uneven load UE error message is not coming. Any idea how to fix?
level your machine
My lg pcb is starting but going to be hanging how to reset pcb
No error
Hello I have a samsung top loader washing machine 13kg the start pause button wont work can u please help me.
Have to check the PCB
Why is start button does not work
Hello sir lg top load 6.2kg water draining but not spinning what's the actual problem sir can u help me
Check the water level sensor.
@@ravifixall ok sir.. thank you for ur valuable information
Hello.I have an LG top loader washing machine drum wont wash fast very slow.can u help please
Check the gearbox
Sir Samsung washing machine 4buton 6.2kg drain karta hai but spin nhi karta hai bujjer bajta hai
Can you help me? I have the same washing machine, when it spins the washer motor operates, instead of then spin function.
Same problem to me also. Solution please
The same machine I used past 8 years.i have a problem with washer.it make very noice.spinner is working.what is the problem?gear box complaint ?
Check the belt tention and gearbox.
How to fix E3 error lg automatic washing machine
Bro my LG top load washing machine both spin and drum not run could you tell me Wat the problem
LG T7222PFFC TOP LOAD WASHING MACHINE
Hi Ravi....my LG WFSL1632EK top load washer is not functioning properly after i attempted to wash a fleece blanket in it. The drum only turns anti clockwise when washing and it does not spin dry at all because the drum cannot turn in a clockwise direction...any help would be appreciated..thanks
If it is not spinning for both side in the washing session, have to check the gearbox. It is underneath with the motor.
Thanks for your reply...I'll check...
Ravi bro my washing machine is washing properly and draining , after the wash it's not spinning , what i have to do for it pls reply
Lg washing machine p4 error pcb ok presre sensor ok ........but still p4 error.....please guide
I haven't seen P4 error.
Sir
My automatic National machine has Spin problem, i hav cheched inlet valve and waterlevel conrol sesor but still problem exist, what can I do now?
drain valve motor also might be a reason, but before replace any part check it properly, many supportive vedios available in youtube. PCB also a check point for this issue.
Dear i have the same problem with damro washing machine after some time it is showing e1 error. What could be the problem pleas halp me
Check the water level sensor. This could occur due to faulty water level sensor.
Hi my machine lg top load 8.5 spin is not working spin time comes only sounds come
Please reply dear
When I give spin function first water drain
After moter sounds come but no drum work only sounds come
Please
Hi Ravi Fix. My LG Fuzzy Logic 6.5kg is not working properly. It is not spinning at all in any mode. Wash mode takes water but no spin. Spin mode drains water but no spin. Please what could be the problem?
Thanks.
There is a high possibility to have an error in water level sensor as discribe in this video with your problem, but you need a new sensor and replace it to check it out.
एलजी की फुल ऑटोमेटिक मशीन है उसमें पानी पूरा भर जाता है और पानी बाहर आने लगता है मशीन इन थे पीछे से नल बंद कर देते हैं तब मशीन में पानी आना बंद हो जाता है है क्या प्रॉब्लम है
Sir ..in LG machine as soon as I press wash button, the water dispensing motor activate and realese all the water and when water finished in drum the valve close . What can be the error?
Mostly water level sensor switch might be the error. Check it as in this vedio.
@@ravifixall thank you sir ...will check
Where can we get this sensor ? Orignal
Try to find it in local parts store. Otherwise look it in online market.
@@ravifixall is it reliable purchasing online ?
I mean about the product or warranty related ?
Sir..what the process to baypass water level sensor
No way, have to replace.
Pls reply sir...I honestly need now..to check water sensor working or foulty
@@ravifixall ok..
Relay no way to bypass the water level sensor, it is not so expensive, just replace it.
@@ravifixall ok.. brother...share your whatsapp number for future helpless for me..my whatsapp is 7874116952
Kindly share root couse
हिन्दी मे भी बता दें सर जी
May bt 134/136 fault
My TOP Load LG washing is working fine except spinning. During spinning there is motor running sound but not actually spinning. Is it belt issue or any thing else? Thank you..
Even I too face the same issue, did you get any solution
Fault code PE water fill sensor in Farsi English good.
drum not spinning
Check the belt.
hi
AMC is fully waste..
English 6od .. Hindustan ki Indian language Hindi me bak bak kar... To ku6 Dimag me teri baate samj me ay.. 👎👎👎👎👎
Hindi me bolo India me English nahi aata jaada please