New Level of Safety and Function for the Table Saw || Clamp On In Feed Table

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 พ.ย. 2024

ความคิดเห็น • 487

  • @BronkBuilt
    @BronkBuilt 4 ปีที่แล้ว +3

    Fantastic idea! I constantly have this issue with my SawStop JobSite.

  • @greggdrennan
    @greggdrennan 4 ปีที่แล้ว +16

    Hey Izzy, Don't forget us Sawstop Jobsite Saw users! Something like this is sorely needed... Thanks loads for all the videos, explanations, ideas and inspiration.

    • @richthib100
      @richthib100 4 ปีที่แล้ว

      Ditto!

    • @warrenxanthos8241
      @warrenxanthos8241 4 ปีที่แล้ว

      Third

    • @RobyWanKenobi
      @RobyWanKenobi 4 ปีที่แล้ว

      He is using it on a Saw Stop.

    • @warrenxanthos8241
      @warrenxanthos8241 4 ปีที่แล้ว

      @@RobyWanKenobi but not a jobsite sawstop.

    • @greggdrennan
      @greggdrennan 4 ปีที่แล้ว +1

      @@RobyWanKenobi Yes it is a Sawstop but it's not the portable Jobsite saw...very different.

  • @michaelaident5845
    @michaelaident5845 4 ปีที่แล้ว

    Bought it. Used it within the first week. Continue to use it. Makes life so much easier and safer.

  • @jayoliver3734
    @jayoliver3734 4 ปีที่แล้ว

    So simple and elegant, very well-conceived.

  • @darklich14
    @darklich14 3 ปีที่แล้ว

    Thanks for saving me so many trips to the store and emergency room!

  • @jeffreyt7177
    @jeffreyt7177 4 ปีที่แล้ว +1

    Absolutely an awesome idea and product

  • @joshadude
    @joshadude 4 ปีที่แล้ว

    Made it only 2 and a half minutes into the video before scrolling to link in description and buying. This is the thing I've needed for years, but never even knew it.

  • @flipincaboken
    @flipincaboken 4 ปีที่แล้ว +2

    Great job Izzy Swan 👍 that is awesome now you need to design one for tubular fence rails. Because my saw has them.

  • @rhuynh
    @rhuynh 3 ปีที่แล้ว

    Impressed by the amount of detail you put into it to finish it. Wish it worked for my saw as I would have likely bought one to support - keep doing what you doing!

  • @gbjones54
    @gbjones54 4 ปีที่แล้ว +1

    Can’t wait to try it out. Something we all struggle with, Thanks Izzy for solving the problem for us all... 👏❤️👏

  • @theintelligentcarpenter9407
    @theintelligentcarpenter9407 4 ปีที่แล้ว

    This is why I watch you, excellent.

  • @cojo3561
    @cojo3561 4 ปีที่แล้ว +15

    Will you do a companion vid with the Dewalt version? The measurements at the end of this vid would be helpful for those with off brand job site saws. Other than that shut up and take my money, love the concept!

  • @michaelanderson7260
    @michaelanderson7260 3 ปีที่แล้ว

    Hi Izzy, to start off I think this table saw extension is amazing and well designed.

  • @PERRYS_PROPS
    @PERRYS_PROPS 4 ปีที่แล้ว +23

    Thanks izzy, pre ordered my Dewalt model just now. Only thing missing is your brand mark.

    • @melissalara2
      @melissalara2 4 ปีที่แล้ว

      Did you get the infeed table yet?

    • @PERRYS_PROPS
      @PERRYS_PROPS 4 ปีที่แล้ว

      @@melissalara2 nothing, nada, nilch

    • @glara4505
      @glara4505 4 ปีที่แล้ว +2

      I asked on his Instagram when I was getting the infeed table and he deleted and blocked me from commenting on his instagram. I just wanna know when I'm getting it. We pre-ordered on August 3... that's way too long of a wait

    • @NV..V
      @NV..V 3 ปีที่แล้ว +1

      Did your Dewalt version ever arrive?

    • @PERRYS_PROPS
      @PERRYS_PROPS 3 ปีที่แล้ว

      @@NV..V yes but it didn't align properly

  • @Papaden3815
    @Papaden3815 4 ปีที่แล้ว +13

    It's so simple that it took someone smart to think about it.

    • @docolemnsx
      @docolemnsx 3 ปีที่แล้ว

      Well put, sir

  • @JockeSelin
    @JockeSelin 4 ปีที่แล้ว

    I’m just very pleased to see you bobbing around, Izzy! 😎👍🏻👍🏻

  • @terryclift6905
    @terryclift6905 4 ปีที่แล้ว

    Izzy
    My table saw infeed table just came. I installed it and it works great. I am in awe of your talent
    and creativity. Can’t wait to see what you are up to next
    Terry

  • @mariomontoya7334
    @mariomontoya7334 ปีที่แล้ว

    Received your In Feed Table for Standard Table Saws. Breeze to put it together..but the video instructions said to locate the latch 2" away from the table because of the miter slots. Well, the miter slot was actually 1 5/8" away. The screws protruded into the miter slot so I had to redo that part. No issues besides that. This does solve instability issues I struggled with in the past.

  • @Mr.GucciClass1A
    @Mr.GucciClass1A 4 ปีที่แล้ว

    This is fantastic!! I’ve always thought why is this not standard with TS. You’re a thinker and genius. Buying mine right now!

  • @jeffreythompson9549
    @jeffreythompson9549 4 ปีที่แล้ว

    Brilliant idea, made one for my saw. Because it is a cheap contractors saw (but works beautifully), the rip fence rail is extruded aluminium, fortunately with flat surfaces top and bottom, I devised a clamp that holds it against those planes with the cam acting in the vertical axis. I've just used it to square up the ends of some glued up panels using my mitre gauge, a job that I always had trouble with in the past. Why did none of us think of this in the past? Thank you Izzy.

  • @charlescheesman1318
    @charlescheesman1318 4 ปีที่แล้ว

    Great Idea. I ordered one to save myself the trouble to make one. looking forward to putting it on my Saw

  • @jamesbenenati1039
    @jamesbenenati1039 4 ปีที่แล้ว +1

    Tried to order for a ship to Canada. got stuck at Shipping & Delivery screen with the message "No shipping options for this location, package weight and total". Will have to wait until the border opens up to ship it to my buddy's house. Brilliant idea Izzy.

  • @BDL090754
    @BDL090754 3 ปีที่แล้ว +1

    Thanks heaps for this Iz, it will really solve my table saw issue

  • @rolandosalvania4273
    @rolandosalvania4273 4 ปีที่แล้ว +2

    HI IZZY IM SO HAPPY SEING YOU ON YA FEET AGAIN HOPE YOUR WELL AND GOOD. KEEP SAFE BRO.

  • @jessemeyle401
    @jessemeyle401 4 ปีที่แล้ว

    Awesome. I love the idea of extending the table for the plywood cutting

  • @billballeza377
    @billballeza377 ปีที่แล้ว

    You need to manufacture more of these, Izzy

  • @colinbateman8233
    @colinbateman8233 3 ปีที่แล้ว

    I’m a carpenter with forty plus years of experience I’ve preached my whole to my crew jigs and how important they are for our continued safety I appreciate your thought process

  • @peterkaufman1125
    @peterkaufman1125 4 ปีที่แล้ว +1

    ordered outfeed table, , paid for out feed table never got
    out feed table great service.never got answer to requests.

  • @jameshorrocks2939
    @jameshorrocks2939 4 ปีที่แล้ว

    Love that design, it doesnt block access to controls and give the support needed. Now you need to make one for the Bosch 4100.

    • @izzyswan
      @izzyswan  4 ปีที่แล้ว

      Working on it!

  • @GrumpyCrabber
    @GrumpyCrabber 4 ปีที่แล้ว +1

    My mid 90's Unisaw came with something similar but out of cast iron and locks on to the unifence rails. I hardly ever see them around and not sure why they are not more common. This looks like a good solution.

  • @katzmosestools
    @katzmosestools 4 ปีที่แล้ว +28

    Absolutely brilliant!

    • @izzyswan
      @izzyswan  4 ปีที่แล้ว +2

      Thank brother means a lot coming from you!

    • @TheTranq
      @TheTranq 4 ปีที่แล้ว +1

      It's a great idea. Makes you slap yourself for not coming coming up with it on your own!

    • @MrJKellerLewis
      @MrJKellerLewis 4 ปีที่แล้ว +1

      Do I smell a collaboration brewing?

    • @PERRYS_PROPS
      @PERRYS_PROPS 4 ปีที่แล้ว +1

      Izzy, Im still waiting on the dewalt ingeed table, any news on the delay?

    • @Nordraw
      @Nordraw 2 ปีที่แล้ว

      @@PERRYS_PROPS Me to

  • @Deqster
    @Deqster 4 ปีที่แล้ว +7

    Cool jig! Names' gotta go though. How about the "In-feed Baby Grand" or "In-feed Grand Piano" or some such?

  • @cpta03
    @cpta03 4 ปีที่แล้ว

    Thanks Izzy. Just what I need for my Dewalt job site saw. I immediately placed my order after watching this video.

    • @izzyswan
      @izzyswan  4 ปีที่แล้ว

      thank you

    • @melissalara2
      @melissalara2 4 ปีที่แล้ว

      Have you got it yet Steve?

    • @cpta03
      @cpta03 4 ปีที่แล้ว +1

      Mel & George Lara Not yet. But Izzy sent me two emails apologizing for the delay. It appears he was not prepared for the large number of orders received.

  • @jeffchevalier3493
    @jeffchevalier3493 4 ปีที่แล้ว

    Awesome idea Izzy. I love the way your mind works. Keep up the good work.

  • @doalex2085
    @doalex2085 3 ปีที่แล้ว

    What a cool 😎 channel ; just came across it by accident. Looking how to make a sled . Smashed that like button , like I was making a snap tie , only because I saw 👀 those pieces of rebar in the corner! Ben a ironworker for over 30 years ! Want to try a little wood working for a hobby ,

  • @norm1124
    @norm1124 4 ปีที่แล้ว

    Happy to see you in that good shape ♥️

  • @BOCAHMBLAKRAKCHANNEL
    @BOCAHMBLAKRAKCHANNEL 4 ปีที่แล้ว +1

    Ammazing sirr nice content

  • @MyGrowthRings
    @MyGrowthRings 4 ปีที่แล้ว

    Looks a lot like that front table extension that Shopsmith introduced back in the 1950’s that replaced their front table extension from the 1940’s! Seriously, it’s a great idea and I’m surprised it hasn’t been produced commercially until now. Cottage Industry for the win! Way to go, Izzy. Scott

  • @billm4560
    @billm4560 4 ปีที่แล้ว +1

    I’ll be putting ordering one for my saw stop! Thanks issy! 👍🏻

  • @Hickamfield
    @Hickamfield 4 ปีที่แล้ว

    good to see you standing

  • @jyjy163
    @jyjy163 3 ปีที่แล้ว

    Tres bonne idée j’adore vos vidéos vivement la prochaine 👍

  • @KhellendrosXS
    @KhellendrosXS 4 ปีที่แล้ว +1

    Great idea Izzy! Glad to see you back on your feet!

  • @misterikkit
    @misterikkit 4 ปีที่แล้ว

    I love your ingenuity

  • @davidhull1610
    @davidhull1610 4 ปีที่แล้ว +1

    Ingenious solutions as usual. And it's good to see you back on your feet!👍

  • @yrralyou
    @yrralyou 4 ปีที่แล้ว

    Very good idea and design.

  • @twoweary
    @twoweary 4 ปีที่แล้ว +1

    Great idea ! I can't tell you how many times I've needed an extra foot or two of infeed support . I'll have to make one though, 1 -because my grizzly has a round fence bar , and 2- I have some laminate left over from a job. TU for sure !

  • @rayrodriguez9840
    @rayrodriguez9840 ปีที่แล้ว

    Great job Izzy! I like that thing.

  • @stonee1968
    @stonee1968 4 ปีที่แล้ว

    Great idea! Good to see you on your feet again too.

  • @shanebeasley1873
    @shanebeasley1873 3 ปีที่แล้ว

    Just got mine as an early Christmas present! Can't wait to use it!

  • @johnperks1715
    @johnperks1715 4 ปีที่แล้ว

    This is by far the best, very best You Tube channel! “Izzy you the man!” Great job!

    • @izzyswan
      @izzyswan  4 ปีที่แล้ว

      Wow, thanks!

  • @TurkiAU
    @TurkiAU 4 ปีที่แล้ว

    Very cool idea 👍
    Thanks for sharing.

  • @JustinBania
    @JustinBania 4 ปีที่แล้ว

    Very excited to see how the DeWalt one will work.

  • @spencerbass7142
    @spencerbass7142 4 ปีที่แล้ว

    Just got it and it fits and works great on my SawStop.

  • @holzwerx
    @holzwerx 4 ปีที่แล้ว

    Thank you so much!!! I ordered one before you got into it once I saw what you had there! I had a great DeWalt hybrid saw (I think it was the 746) and had the small but beautiful cast iron sliding table on it. Well when I sliced off the end of two fingers my wife told me to get the SawStop. Bye bye DeWalt 746. I really miss that sliding table but I put out the cash for the Incra 5000 miter sled so I could still easily (or so I thought) true up the tops and bottoms of cabinet sides. Your infeed clamp is exactly what I need ... at least I'm hoping so ... to use that sled on parts that are 24" wide. THANK YOU!

  • @HuntsWorkshop
    @HuntsWorkshop 2 ปีที่แล้ว

    Just ordered one! Huge fan of yours!

  • @DavidRDarrow
    @DavidRDarrow 4 ปีที่แล้ว

    Great to see you up and walking, man!

    • @izzyswan
      @izzyswan  4 ปีที่แล้ว

      Hey, thanks!

  • @LeosTueftelei
    @LeosTueftelei 4 ปีที่แล้ว +1

    Good idea and nice work! 👍 👌

  • @steveandrewsmith
    @steveandrewsmith 4 ปีที่แล้ว

    Great idea.... How much of this do you dream up when you can't sleep at night..... Your cool ideas just keep coming. It helps make me more creative with what I do and how I can get it done.

  • @RemoteHogg10
    @RemoteHogg10 4 ปีที่แล้ว +1

    Kinda looks like a baby grand piano! Love the idea though. Nice work!

  • @blackmagic8115
    @blackmagic8115 4 ปีที่แล้ว

    Thanks! I have a factory built extension for my old ShopSmith.

  • @HyperactiveNeuron
    @HyperactiveNeuron 4 ปีที่แล้ว

    That's awesome! Genius addition to any saw.

  • @ChrisHaggertyArt
    @ChrisHaggertyArt 4 ปีที่แล้ว

    This is genius. Its a problem ive always had to solve with my tracksaw, which is a pain in the ass. Great job dude!

  • @Tools4Dominion
    @Tools4Dominion 4 ปีที่แล้ว

    Fantastic 🛠️👊 Ordering now 👍

  • @roynielsen1911
    @roynielsen1911 4 ปีที่แล้ว

    Awesome product Izzy. Ordered one this morning. Thanks!

  • @SMee67
    @SMee67 4 ปีที่แล้ว

    What a great looking product, a must have for most table saws. 👌🏾
    Awesome work and excellent invention, mate. 👍🏾

  • @michaelbottalico
    @michaelbottalico 4 ปีที่แล้ว

    Great safety feature.

  • @bagwellwoodworks8969
    @bagwellwoodworks8969 4 ปีที่แล้ว

    Izzy you’re a genius!! Brilliant idea!

  • @MaBuKunsthandwerk
    @MaBuKunsthandwerk 4 ปีที่แล้ว

    Tolle Idee und Umsetzung

  • @David-jn9do
    @David-jn9do 4 ปีที่แล้ว

    Just finished installing mine. FYI, installation steps were identical for my jet xacta fence for a good fit. Amazing idea, Izzy. I debated shamelessly ripping off the design and making my own, since its easy enough and I have everything needed laying around. And I'll be honest, the shipping cost made me cry a little bit. But for the great idea, and how easy it was to get installed, the price was a steal.
    My only feedback so far - I think it could use a longer bushing on the cam clamp so I can tighten down the bolt without binding it up or worrying about it falling out down the road. I'm a little skeptical about the clamp arrangement in general, but I'll be putting some miles on it to see how it goes before I make any changes.

  • @lesneilson5632
    @lesneilson5632 4 ปีที่แล้ว

    Thanks for such a great idea, just been down to my saw for measuring and will have to make one myself as the height dimensions are smaller but doable This will make a big difference to my sawing and handling larger pieces in safety and confidence Yahoo!

  • @PPMOCRG
    @PPMOCRG 4 ปีที่แล้ว

    I have a Skilsaw table saw. I love it, but have this same issue. This is exactly what I need.

  • @michaelhancock5606
    @michaelhancock5606 4 ปีที่แล้ว +5

    Awesome fixture Izzy! Great to have you back at it and progressing from surgery. Would love to have one for my SawStop job site saw gen. 1 Is that something that you will be offering at some point? Keeping my fingers crossed and my hopes up that the answer is YES! Stay safe and healthy my friend!! Mike

  • @johnterry9342
    @johnterry9342 4 ปีที่แล้ว

    I was so excited when I saw it, I ordered it before taking the measurements on my Ridgid tablesaw. There is no gap between the saw top and the mounting rail. Hopefully a couple of washers will rectify that. Fingers crossed

    • @izzyswan
      @izzyswan  4 ปีที่แล้ว

      we are release the infeed i designed for the ridgid next week. just shoot my team and email and they can make the switch if you would like. you can email us via my web site izzyswan.com

    • @johnterry9342
      @johnterry9342 4 ปีที่แล้ว

      @@izzyswan I ordered the standard infeed table, I would like to change the order to the Ridgid version that will be released next week.

  • @danharold3087
    @danharold3087 4 ปีที่แล้ว

    Izzy, kudos on a great idea. When I saw 'in feed table' in the title I figured it was going to be in the way. Again well done.

  • @MovieMike1969
    @MovieMike1969 4 ปีที่แล้ว +2

    That start was funny, popping into the doorway.

  • @paultay23
    @paultay23 4 ปีที่แล้ว

    I ordered both for my UK version of the DW745 on Sunday, massively looking forward to fitting them both. These will make a massive difference for my saw which is on wheels in a small workshop. They will compliment my "Flappy Paddle" safety stop switch which I sell on my Etsy Store.... Thanks Izzy (I will put up a link if Izzy has no objections)?

  • @susiq4671
    @susiq4671 4 ปีที่แล้ว +1

    thanks Izzy, great idea and looks v easy to use.
    I also noticed your fantastic Y-shaped push stick about 2 mins into the video, would love to get hold of one, who is it made by?

  • @daveyJ213
    @daveyJ213 4 ปีที่แล้ว

    Love the ingenuity! Great job Izzy; thanks for thinking of us out here.

  • @makermarkdesigns
    @makermarkdesigns 4 ปีที่แล้ว

    Perfect, spectacular, and spot on!!! I ordered mine as soon as I saw this video. I have used multiple "solutions" for this, none of which I liked. I am looking forward to receiving mine soon.

    • @izzyswan
      @izzyswan  4 ปีที่แล้ว

      Glad it helped!

  • @dalewier9735
    @dalewier9735 2 ปีที่แล้ว

    Izzy
    You always have something (and often many somethings) to improve the accuracy and safety of my shop in every video. I am a musician and am extremely careful not to injure my fingers and hands but love to work in wood in my shop.
    Thank you,

  • @bartgiles1068
    @bartgiles1068 4 ปีที่แล้ว

    So simple what a genius 🤓

  • @Lady_Miter_Saw
    @Lady_Miter_Saw 2 ปีที่แล้ว

    Brilliant idea!

  • @Maker238DeLoach
    @Maker238DeLoach 4 ปีที่แล้ว +5

    Awesome idea brother I’m the same with you I love those panel sleds but they only cut so much without it getting floppie Moppie love it dude keep them coming!!

  • @matthewcarpenter4716
    @matthewcarpenter4716 4 ปีที่แล้ว

    Unwieldy, Izzy's word of the day!

  • @JoeyBPhotography
    @JoeyBPhotography 4 ปีที่แล้ว

    I literally needed something like this today, and was about to slap something together, then I saw your video and it looks far better than what I would've come up with. Ordering now!

  • @KRSound
    @KRSound 4 ปีที่แล้ว

    Sweet. Just bought one!

  • @rickgordon8377
    @rickgordon8377 4 ปีที่แล้ว

    I just saw this. Its brilliant! Thank you

  • @ButlerBuiltWoodworking
    @ButlerBuiltWoodworking 4 ปีที่แล้ว +1

    You’ve done it again brother! Love it! Ordered!

    • @izzyswan
      @izzyswan  4 ปีที่แล้ว

      🙏🙏

  • @TheNighthawke78
    @TheNighthawke78 4 ปีที่แล้ว

    Great looking product. Just ordered one for my sawstop!

  • @tykellerman6384
    @tykellerman6384 4 ปีที่แล้ว

    Damn Izzy just plain genius 🤠👍

  • @binnsbrian
    @binnsbrian 4 ปีที่แล้ว

    Very fair price for all all that work.

  • @mcarojcc
    @mcarojcc 4 ปีที่แล้ว +1

    Brilliant!!! I need this in my life!!

  • @jokerace8227
    @jokerace8227 4 ปีที่แล้ว

    I'm a fan of the DeWalt DWE7480 for it's compact design with safer R&P guidefence, but something similar to this is good idea to go along with my outfeed/router table extension design. 👍

  • @elikintisch1046
    @elikintisch1046 3 ปีที่แล้ว

    Clever and elegant! Like its inventor :)

  • @jakoj2098
    @jakoj2098 3 ปีที่แล้ว

    great invention please do the vid for the dewault option

  • @chippysteve4524
    @chippysteve4524 4 ปีที่แล้ว

    Great idea dude.
    Hope it sells well

  • @AdvisorDanny
    @AdvisorDanny 4 ปีที่แล้ว

    thank you for subscribing, liking and commenting 🙂🇨🇦💓🌎 which I have been happy to do for you as well...all good people are welcome... together we can make life a little better for others by doing what we can where we are 🙂

  • @marshallmurrell4583
    @marshallmurrell4583 3 ปีที่แล้ว

    Would love to have one for my Bosch jobsite saw.

  • @stevemassimini6314
    @stevemassimini6314 4 ปีที่แล้ว

    Bought one. Great idea.

  • @ImpromptuCardMagic
    @ImpromptuCardMagic 4 ปีที่แล้ว

    That is freaking cool!