ฝัง
- เผยแพร่เมื่อ 6 ส.ค. 2024
- Long awaited photo recon version of the famous Vought Crusader. First released boxings were RF-8A and RF-8G and ofcourse I bought both of them. The plastic parts are exactly the same and the only difference is the decals. I started with upgraded RF-8 and wanted to build it out of the box to see how it goes together.
Manufacturer Sword
Model Number SW72150 (SW75150)
Date of release New tool 2023
Part count Low
Price payed 20€
Decals in the box For two planes
Extras Out of the box build
Airbrush used Badger Xtreme Patriot 105, Fengda FE-183K, Badger 360
High points Nice recessed details, Good decals, masks and resin seat out of the box
Low points Instuctions
Timestamps:
0:00 Intro
0:22 Unboxing
1:43 Reference books
2:03 Build
7:42 Painting
9:03 Decalling
10:16 Weathering
12:12 Final reveal
13:26 With other planes
14:09 Conclusions
Being limited run type of kit you have to take it into account when you build the model: There is no part numbers in the sprue, there are injection ejector marks that has to be removed before parts fit etc. But the instructions are the worst part of the kit, but as there are not a lot of parts you can figure the kit out. But I would have liked the instructions to have mentioned which of all the options (there are all the lumbs and bumbs to make every RF-8) you should use with each decal option. Although there are no locator pins, after you have done all the fiddly small inside parts the rest goes together very nicely. The most of the filler goes to intake, other parts that needed filler were some alignment issues I made myself.
After all I was very happy with the kit and I make the RF-8A version next with knowledge of this and with some twist. Sword can make any packaging with these plastics and I can see myself buying for example Project Bullet and final flight versions if they decide to make such...
Inspire And Motivate by Mixaund | mixaund.bandcamp.com
Music promoted by www.free-stock-music.com - ยานยนต์และพาหนะ
