Great choice, I put the same on my F a few months ago. Fitment was a bitch with Sikky V1 headers, had to use doughnut gaskets on some sections. Sounds stock with the valves closed too. F looks and sounds good bro 👍
@@EvanIggy nice, the headers made the biggest difference performance wise. Luckily they came on the car when I bought it. Dyno’d around 400 to the wheels with the RR Intake and tune. Would recommend staying away from the intake, runs a bit rich compared to my F buddies w/just the tune
Sikky v2 headers, RR tune and intake, xforce varex exhaust. Car sounds great. No drone at all. Sometimes I can't tell if my valves are open or not because I have no cabin noise, inside sounds stock. Exhaust tone is loud 🔊 on the outside if I get on it.
I have the first gen x-force for the isf and the fitment is so terrible. You have to cut and re weld the hangers on the muffler and then you have to cut some of the tips off the mufflers as they hit the factory exhaust tips if you don’t and it just wanted to bind up and leave gaps when you tightened it all up so this is a huge improvement to the older model. I wish I could find a greddy exhaust for it somewhere
Oh that sounds terrible! The pass side muffler tip does hit the factory tip alittle bit but you can’t hear any noise from it. And same dude I’d love to have a the greddy exhaust but I don’t wanna pay $5k for it lol
For the fake exhaust tips on the F sport. Are they just bolted on? Trying to find a video on them and you are the only one that showed the back of the rear bumper and just wanted to know. I know it’s an old video but hope you see this. 😊
hello there I am new to your channel and I just hit that red button and I am here to support you very nice exhaust on your lexus. I drive a lexus as well but mine is a 2014 IS250 it has some upgrades but I wanna do more to it.
@@EvanIggy so far led Lemans gold fog lights and led front and rear dome lights and led reverse lights and led lights for the doors and 5% limo tint and 3.5 inch tips. Next mods I want to do are muffler delete and intake and supercharger and tune.
Did you run to any fittings issue? I can hear something like metal grinding or something on mine when driving like loose and sounds metal clanking. Lol. I even cut about half inch of tips coz its hitting the stock tips.
I had the passenger side tip hitting the fake exhaust tips, trimmed that. Then I had the two pipes going through the cross brace hitting sometimes over bumps so I spaced the brace alittle bit. Now I have no rubbing/ rattling issues
It depends on if you want it to be quiet some of the time. With the mufflers in quiet mode it sounds stock. With them open it is way louder. I’ve heard other ISF’s with just the xforce mufflers and it sounds exactly like mine with the mufflers open. So if you don’t have a need to open or close the mufflers, then I’d say just get the regular one.
I got mine with 1 left in stock a few months ago, they even priced matched it with another cheaper site $1,079. Great exhaust, the valves are why I bought it. Perfect for when you see 5-0 😂
The x force sounds terrific on my isf. V8 rumble
Great choice, I put the same on my F a few months ago. Fitment was a bitch with Sikky V1 headers, had to use doughnut gaskets on some sections. Sounds stock with the valves closed too. F looks and sounds good bro 👍
Ahhh nice idea!
I’m looking at getting the PPE headers from RR Racing eventually with their stage 3 kit
@@EvanIggy nice, the headers made the biggest difference performance wise. Luckily they came on the car when I bought it. Dyno’d around 400 to the wheels with the RR Intake and tune. Would recommend staying away from the intake, runs a bit rich compared to my F buddies w/just the tune
Sikky v2 headers, RR tune and intake, xforce varex exhaust. Car sounds great. No drone at all. Sometimes I can't tell if my valves are open or not because I have no cabin noise, inside sounds stock. Exhaust tone is loud 🔊 on the outside if I get on it.
1700 for my PTS joez w/ 3.5 tips and sounds AMAZING! no valve but one of the best tones I’ve heard for the ISF
100%
I have the first gen x-force for the isf and the fitment is so terrible. You have to cut and re weld the hangers on the muffler and then you have to cut some of the tips off the mufflers as they hit the factory exhaust tips if you don’t and it just wanted to bind up and leave gaps when you tightened it all up so this is a huge improvement to the older model. I wish I could find a greddy exhaust for it somewhere
Oh that sounds terrible! The pass side muffler tip does hit the factory tip alittle bit but you can’t hear any noise from it. And same dude I’d love to have a the greddy exhaust but I don’t wanna pay $5k for it lol
Had the same fitment issues with the Sikky V1’s. Doughnut gaskets worked to make it doable though.
For the fake exhaust tips on the F sport. Are they just bolted on? Trying to find a video on them and you are the only one that showed the back of the rear bumper and just wanted to know. I know it’s an old video but hope you see this. 😊
Yeah atleast for the ISF they’re bolted from underneath
@@EvanIggy awesome. Thank you 🙏🏼
Hayward & Scott for the win!!🔥🔥 No comparison!🤷🏽♂️ Lol don't kill me
I went full Novel. Sounds way better than Hayward & Scott IMO.
@@zaneiken07 daangg baller.. okay okay i admit if i had the funds for a 10k exhaust then maybe I'll go novel too 😅😭
PPE and Novel both offer valved exhausts.
hello there I am new to your channel and I just hit that red button and I am here to support you very nice exhaust on your lexus. I drive a lexus as well but mine is a 2014 IS250 it has some upgrades but I wanna do more to it.
Thanks for the views! What mods do you have done to it already?
@@EvanIggy so far led Lemans gold fog lights and led front and rear dome lights and led reverse lights and led lights for the doors and 5% limo tint and 3.5 inch tips. Next mods I want to do are muffler delete and intake and supercharger and tune.
damn that thing sounds good
novel and ppe make valved exhaust for the isf ,pretty pricey though
Clean ISF🔥🔥 in CT too 🔥
Nice what part of CT? I’m in the new Haven area
@@EvanIggy Groton/New London
Did you run to any fittings issue?
I can hear something like metal grinding or something on mine when driving like loose and sounds metal clanking. Lol. I even cut about half inch of tips coz its hitting the stock tips.
I had the passenger side tip hitting the fake exhaust tips, trimmed that. Then I had the two pipes going through the cross brace hitting sometimes over bumps so I spaced the brace alittle bit. Now I have no rubbing/ rattling issues
Hello nice sharing 👍 sending my full support new friend thanks
Good job :)
Is it worth getting the varex x force if I don’t plan on running any after market headers? Should I just get the non valves
It depends on if you want it to be quiet some of the time. With the mufflers in quiet mode it sounds stock. With them open it is way louder. I’ve heard other ISF’s with just the xforce mufflers and it sounds exactly like mine with the mufflers open.
So if you don’t have a need to open or close the mufflers, then I’d say just get the regular one.
@@EvanIggyyou're very satisfied a varex exhaust ?
@@Mr19011989 yeah I loved how it sounded
Did you buy the last one from summit?
I actually think I did lol
@@EvanIggy I was looking to buy this last one! Damn you! haha!
@@sdlausen1 sorry! Lol
I bought it like a month ago
I got mine with 1 left in stock a few months ago, they even priced matched it with another cheaper site $1,079. Great exhaust, the valves are why I bought it. Perfect for when you see 5-0 😂
@@pimpin94gsr any more for sale wherever you bought yours?
Going from my c63 w294 to a isf is a hugeeeee downgrade on the sound department :(
Gotta get an exhaust! They sound great after!
こんにちは、
LEXUS ISF 👍😊