5 years later and you are still helping us folks...thank-you! I have two nice 1969 truck doors if anyone needs them. I bought them thinking they would fit my panel truck but they don't. :( I'm in Ohio.
I wouldn’t have been able to get this apart on my 70 without this video. Not knowing about that notch for the roller would have caused much cussing and frustration!Thanks.
excellent video, just guided me to remove the hardware i needed out of a very crusty pair of doors with good glass and latches. lots of lube and a hand impact driver were a must! thanks!
Man did I need your channel. I’ve got 10 of these trucks. Just want to build a couple nice ones. The 67 thru 72 are pretty common in my area . Most are pretty ratted out, so you need a lot of parts trucks. I’m really in need of a short box for 67 c10. Get ready for a lot of questions
Awesome video, very detailed, shows every little thing, and little trick to take these apart. Came here after watching LMC's failure of a video that expects you to be a former chevy factory worker who already knows every single in and out. LMC fail. Tremaynes Trucks for the win!
Thank you very much helped me out alot the person that build my truck put the old regualators on and the window would not roll down this helped me to do mine saved me alot of money was about to take it to a shop thanks again.
Very very well done video! Didn’t have to hear about a bunch of shit that doesn’t pertain to the dissembling of a 67-72 C- SERIES. Pickup! Don’t mean to sound like an Ass, it’s just the other day I watched a 20 minute video with 20seconds of actual usable information! Pertaining to a 700r4. But I left there knowing his assistant doesn’t put his thins/tools back where he found them! His sister is married to this man and they are currently trying to have a baby or was it trying to have a divorce cause he doesn’t put anything back!…. but ok enough. You get the poing
What’s that gasket attached to the glass and the window regulator slide holding the glass at 6:35... I broke my driver glass and my gasket holding the window it self in the rail is dry rotted. Need to order a replacement but can’t find what gasket or part number that is. Didn’t come with the gasket kit I ordered either.
It's called glass setting tape. The Car and Truck shop has it for 50 cents a foot. Depends on the thickness of your window, but I recall mine fit snug with .047 thickness. Thicker was impossible to get the window in the track. Some local glass shops also carry it. Buy a few thicknesses and try it em out, it's cheap.
Most likely the latch is stuck. Try to spray some lubricant on the latch if possible, maybe from the window opening down, and have someone tugging on the handle while you push the door from the inside. Be careful not to push in the middle of the door or kick it because it will dent, push at the back of the door. I give them a few good shoilder hits. Once you get it open remove the latch, clean and lubricate it. I recommend WD 40 Gel Lube
5 years later and you are still helping us folks...thank-you! I have two nice 1969 truck doors if anyone needs them. I bought them thinking they would fit my panel truck but they don't. :( I'm in Ohio.
Thank you and I will continue helping and making new videos
Great video. Doesn't waste my time, right to the point. The best video on TH-cam for this job. Thank you.
Lord bless you, man!
Without having found this video, I'd have STILL been pulling out what few strands I have left...
The best tutorial on 67-72 window/door disassembly I have seen. I have taken many apart and it always seemed to be difficult, until now! Thanks.
I wouldn’t have been able to get this apart on my 70 without this video. Not knowing about that notch for the roller would have caused much cussing and frustration!Thanks.
Look at you with that screwdriver + box end wrench trick! That just made my day!
excellent video, just guided me to remove the hardware i needed out of a very crusty pair of doors with good glass and latches. lots of lube and a hand impact driver were a must! thanks!
Awesome I'm glad this was helpful. Thank you for watching
Man did I need your channel. I’ve got 10 of these trucks. Just want to build a couple nice ones. The 67 thru 72 are pretty common in my area . Most are pretty ratted out, so you need a lot of parts trucks. I’m really in need of a short box for 67 c10. Get ready for a lot of questions
Jesus clips... Absolute gold
Great video. Restoring a 71 C10 stepside. Videos like this are getting me through it! Thanks!
Awesome video, very detailed, shows every little thing, and little trick to take these apart. Came here after watching LMC's failure of a video that expects you to be a former chevy factory worker who already knows every single in and out. LMC fail. Tremaynes Trucks for the win!
Thank you so much! You have explained everything in such detail. It’s been helping me a “non experienced gall” on a project I just started
outstanding video! you made it look easy. I replaced all the latch mechanisms, but was scared of the windows. now I'm good to go!
Great video showing the field stripping of a GM door.
Thank you
Thank you this is the best video for 67-72 C10 c20 s doors
Thank you for this video. Taking 67 c30 doors apart right now and this helps a lot.
Thank you!
Outstanding video... I wish they were all this well done.
Great video. I was very overwhelmed by this due to lack of room to maneuver. You absolutely made it easy to understand.
Thank you very much helped me out alot the person that build my truck put the old regualators on and the window would not roll down this helped me to do mine saved me alot of money was about to take it to a shop thanks again.
good video, i did find that if i take out the door latch assembly and rods first you get a little more room
Good stuff, appreciate the time you took to share!
Ty for both the videos you did on this. I did both sides on my 68.
Wow, I learned something about that screw driver. Thanks for the video.
Thanks. Both of mine failed within a month of each other. I replaced both sides in two hours. 1968 Chevy half ton C10.
10 minutes ! This would take me way more than 1 day.
The best easy video. Thank you sir
Thanks and well done!!
Dang you're a beast! You knocked that out like it wasn't nothing...and I'm still scared of it..lol. Wish I had you as a neighbor..lol
Very very well done video! Didn’t have to hear about a bunch of shit that doesn’t pertain to the dissembling of a 67-72 C- SERIES. Pickup! Don’t mean to sound like an Ass, it’s just the other day I watched a 20 minute video with 20seconds of actual usable information! Pertaining to a 700r4. But I left there knowing his assistant doesn’t put his thins/tools back where he found them! His sister is married to this man and they are currently trying to have a baby or was it trying to have a divorce cause he doesn’t put anything back!…. but ok enough. You get the poing
You got a new subscriber 👍🏻😃
These are GOLD! Thank you a ton. Beer on me!
Awesome first video man. Looking forward to future videos
Thanks so much. Well done.
I always put grease on those bottom bolts
Thank you sir very good!
Great video! Very helpful. Thanks!
GREAT VIDEO MUCH APPRECIATED; PATRICK.P
Great Video/job!, learned a lot, Thank You.
Only one word, awesome.
Thank you Sir! This was very helpful!
So more than likely this would be the problem I am having with my 1971 C10 why my both of my windows dont go down? Cool video.
Pretty straight forward wonderful demonstration video and funny guy too about the Jesus clip🤭😂
awesome thanks man nice truck in the video
You are welcome. Ol Greenie was one of my favorite trucks
Bro you are amazing!!!
Great video! Thanks!
Well done! Thank you!
Great video man both the channel and the Instagram are great keep up the good work
Nice job , thanks.
Awesome video !
Thanks , helped us out .
Thank you sir. Helpful for sure.
Thank you C10 GOD.....BadAss….. Can you do one for the drive shaft lengths and carrier? 350/400
Hey thanks for sharing that was very helpful
Thanks for the video , very helpful .
That last part you removed!! Can that be removed by itself to swap to another door?
I gotta do all that to replace the side mirror??
Done that a time or two from the looks of it.
Will this work if the window is stuck up?
What’s that gasket attached to the glass and the window regulator slide holding the glass at 6:35... I broke my driver glass and my gasket holding the window it self in the rail is dry rotted. Need to order a replacement but can’t find what gasket or part number that is. Didn’t come with the gasket kit I ordered either.
It's called glass setting tape. The Car and Truck shop has it for 50 cents a foot. Depends on the thickness of your window, but I recall mine fit snug with .047 thickness. Thicker was impossible to get the window in the track. Some local glass shops also carry it. Buy a few thicknesses and try it em out, it's cheap.
Scott McKesson appreciate the reply, finally found and got some last week. But yea I got a roll of glass setting tape from TC&TS
I don't know what im missing here but my glass won't come out.
Awesomeness
I cant get my window to come down where should I start?
I replaced the hinge pins and bushings. I have a very slight vertical movement in the hinge. Is that acceptable or a no go? Thanks
great video...thanks
Thank you, just cut my time in half I'm sure.
Where can I find hose screws and how do I thread them in
I was just wondering where that damn jesus clip went....
What if the door wont open, both of my doors on 72 truck will not work. Windows are open. And door is unlocked
Most likely the latch is stuck. Try to spray some lubricant on the latch if possible, maybe from the window opening down, and have someone tugging on the handle while you push the door from the inside. Be careful not to push in the middle of the door or kick it because it will dent, push at the back of the door. I give them a few good shoilder hits. Once you get it open remove the latch, clean and lubricate it. I recommend WD 40 Gel Lube
How do you take out the felt inserts in the window channel?
At what point do you put on the felts
Window run channel then felts and scrapers after everything else is assembled.
So there are no “Jesus” clips on my door handles... any help? I’m assuming not original handles? Anyone?
0:30 Well, what the hell is that tool called?
Door handle clip tool maybe? Most auto parts store have them in the HELP section
What about the window seal? Shit
Thank you!