Heavy Duty SMC Fiberglass Repair
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- Part 1 video of SMC fiberglass repair
With wrecks happening every day. JM&R will get your Semi Truck repaired in a hurry. We provide Services semi-truck, emergency vehicle, school bus, bus, fire truck, ambulance, and heavy equipment in the Dallas Fort Worth area!
Follow us on Facebook:
/ catego. .
Check out our website:
jmrbodyworks.com/
Call us today to get your FREE estimate!
972-993-1530
Music Credit: Formula - RL Grime|Juelz
I did commercial trucj body work inn the past for Frieghtliner. I sometimes miss doing it. Videos like this take the edge off. Cool
Thanks for watching! We have lots of videos planned for the future so be sure to subscribe.
Nice work bro
NICE TO SEE THEY NOW HAVE RESINS....FUSOR HAD THERMOSET GLUES...RESINS LOOK LIKE THEY MAKE PROCESS MUCH SIMPLER...
Our second part of the series will launch soon using a 3M product that is taking over the market. Thanks for watching!
@@johnkeith1599 would the 3m product be the smc repair resin? Part number 8219?
@Brandin Brown 8219 is used mostly as a backside patch combined with matting to give strength. If you don't have access to the backside then use 3M 8217 with the matting instead. Be ready though cause you only have a couple minutes before it dries. Get all your prep done first
To each their own... But when repairing with fiberglass mat, I always split the fiberglass in 2 sheets so it doesn't leave a hard line edge and feathers better into the surrounding surface.
Sorry just skimmed through the video, does this require a 180 deg heat set for 15 minutes like the
Lord Fusor brand SMC Adhesive? I'm adding fiberglass body panels to a SMC truck bed and trying to find the latest and greatest products to use.
If you are needing to "glue" the panels onto the bedside then I would recommend 3M 8273 repair adhesive. It is a 35 minute glue that will bond the two panels together then you can go back and bodywork the seams and smooth it out using the resin and fiberglass matting in our video. No need to apply any heat but like most two-part products, heat will help activate and speed up the drying process. If you have the time then I recommend that you visit 3M's collision repair training website, click on tab "view all courses" and scroll down to HDCV: Composite body panel repair for SMC, METTON, and FRP and also the next video on HDCV: Panel Replacement. They will show you all of the latest materials and proper repair procedures so that you don't have to do it twice. Much better than watching our 4 minute video.
Thanks, I'll check it out. Your 4 minute SMC repair video was the most current and helpful video I've found. The rest are all repairing small holes and a few years old.
I wish I knew how to tell the difference between normal fiberglass and SMC. I need to repair my flip/tilt hood on my 1989 Ford F800.
1989 models are more than likely traditional fiberglass. To tell the difference, check the color. SMC will be white and chalky with fiberglass strands woven throughout. Traditional polyester fiberglass will be semi translucent and is often golden colored with fiberglass strands woven throughout as well. Hope this helps
Wow Perfect Job 🔥
Do you wipe down with acetone or prep the surface with anything after sanding and before applying body filler?
Clean the panel with soap and water before starting, and after that, no extra step is needed for this product. Thanks for watching!
Looked like you used blue hardener. Do you have a part number for the hardener you use and was it the 1.5 in ribbon to 1oz resin? Thanks
Please tell me..does SMC resin work with non-smc fiberglass? Is a 1981 corvette made with SMC fiberglass? Great video - nice work!
Yes. SMC resins will work on traditional polyester fiberglass. I wouldn't recommend it however mostly because of the cost difference. SMC resin is around 3-4 times the cost. Hope this helps!
@@johnkeith1599
Thank you sir. I figured out that a 1981 corvette is indeed SMC fiberglas, so I have to use it. So that begs the question..what type of Dijon mustard colored filler did you guys use in the video? We never got to see the front of the can! I can imagine the old standard USC duraglas would also not work with SMC. Please, and thank you! Have a great evening.
@@rickshaw6198 We use 1171 3M platinum plus filler "dijon mustard color" lol. It has built in adhesion promoters and sticks to anything including galvanized steel, SMC, primers and so on.
@@johnkeith1599 Thank you sir. Your time and assistance are great appreciated! Have a good evening.
Will the usc chemical 58220 all resin smc work
Nice video! what was the body filler you used after applying the fiberglass. was it just normal bondo filler?
We use 3M's Platinum Filler, pt#01171. Thanks for watching! We have another SMC video coming soon that uses a different repair technique you'll want to see.
@@johnkeith1599 i can't find that video.
I thought I saw the use of evercoat in this video. I've read elsewhere that ever coat has polyester in its resin. Am I wrong about that. I'm researching so I can Bond a fiberglass vent and hood scoop to the SMC hood of a Pontiac fiero.
Or 01131? See side of can at 2:56
What primer and paint did you use? Thanks
We spray PPG Delfleet paint line. The primer is a high build, PPG K36
What was the blue thing you add it to the SMC in the cup ????
It is the cream hardener to activate the resin. It's also is available in red. Be sure to read the mixing instructions but it is normally a 1 inch ribbon per 1 ounce liquid resin
@@johnkeith1599 thank you 🙏
Just curious did the whole hood get recleared or blended?
They removed everything so. Safe to assume it wasnt blended
I just tried to fix a jeep roof with rigid parts adhesive from 3M.. I put rage gold over it and it did not stick.. how did you get it to stick on to the semi hood?
3M makes a few different semi rigid adhesives but most are made for plastic and are urethane based. There is a TPO adhesion spray that goes down first to help it stick. If your jeep roof is fiberglass and not plastic then you want to go with an epoxy based product. Purchase 3M 8115 panel bond and be sure to clean and sand the surface prior to applying. Panel bond sticks to everything but has a long dry time so be patient. I believe it takes a full 24hrs to cure but you won't have to worry about it not sticking.
@@johnkeith1599 thanks man. I’m on a time crunch because it’s been in the shop for over a week. I just got some of the SMC resin and a fiberglass mat. I’m gonna try and build the edge back with that. I appreciate your feedback!
Great video!, I subscribe to your channel too.