FOUNDATION DESIGN IN CSI SAFE I SQUARE / RECTANGULAR FOOTING IN SAFE I IS 456-2000 I RCC FOUNDATION
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- About this video: In this video you will learn:
1. How to define material and section properties in CSI SAFE
2. How to check upward soil pressure in CSI SAFE
3. How to check settlement in CSI SAFE
3. How to check pinching shear check in CSI SAFE
4. How to check one-way shear checks in CSI SAFE
Services: SSC provides professional training for civil engineering students/working professional, to make them professional structural engineer. Our ongoing live training programs are:
Program-01 CSI ETABS I RCDC I EXCEL
Demo of training: • NEW BATCH ETABS+RCDC+E...
Course Duration: 30 to 45 Days
Daily Live Session: 1.5 to 2 Hours + Recorded Session (Life Time Access)
Certification: ISO- 9001-2015 (Govt Approved Certificate)
Program-02 CSI SAFE I EXCEL I MANUAL
Demo of training: • Demo Session On DESIGN...
Course Duration: 30 to 45 Days
Daily Live Session (1.5 to 2 Hrs.) + Recorded Session (Life Time Access)
Certification: ISO- 9001-2015 (Govt Approved Certificate)
Note:
1. If you want to join any of training contact at: 8857891345
2. If you want to get any of the following Excel Sheet WhatsApp at 8857891345.
1. Excel sheet (Design of Isolated Rectangular Footing)
2. Excel Sheet (Design of One-Way Slab)
3. Excel Sheet (Design of Two-Way Slab)
4. Excel Sheet (Design of Axially Loaded Short Column)
5. Excel sheet (Design of all types of Beams)
6. Excel Sheet (Design of Staircase)
7. Excel Sheet (Wind Load by Force Coefficient Method)
8. Excel sheet (Design of Combined Footing)
9. Excel sheet (Design of Strap Footing)
10. Excel sheet (Design Basement Wall)
11. Excel sheet (Design of Stepped Footing)
12. Excel sheet (Design of Sloped Footing)
13. Excel sheet (Design of Cantilever Retaining Wall)
14. Excel sheet (Design of 2,3,4,5,6 Pile Cap)
15. Cost Analysis between PAD I STEPPED I SLOPED Footings
Other Social Medeia Links:
www.structsoftcentre.com
But why didn't you considered Mx, My, Mz , Fx and Fy from ETABS result and only took Axial Force Fz during footing design using excel ?
Because we need only initial sizes and depth of footing to provide in SAFE , and if you directly do modelling in safe then you will stuck in the loop of doing analysis and multiple iterations , in the big project this will eat your huge time. You can create your own excel sheet but if you do this in excel sheet then why you need the software. And in the Eccentric , Combined & Raft foundations you can not do by using Excel sheet , And in the bigger project you have to go for non linear analysis and design otherwise you may end up with heavy design or under design. And the above forces which you have mentioned, most of the time they will not govern in the smaller structures but still you need to for design purpose that why you need software .