RANE DJ TWELVE - Vinyl Assembly and Adjusting the Tension

The TWELVE makes it easy to adjust the tension of your vinyl so you can achieve the perfect spin. In this video, we go over how to remove the vinyl on the top, swap out slipmats, and re-attach while setting the platter tension.
Here are the basics:
1) Use the 2mm Hex tool to remove the vinyl record but loosening the hex screw on the 45 adapter
2) Remove the vinyl record and swap out the slipmat if necessary.
3) Find the cavity on the side of the spindle and line this up with screw on the 45 adapter while placing the record back on the spindle
4) Tighten the hex screw enough so that the vinyl can turn with the spindle and move up and down.
5) if you like a tight response with the platter, press down on the record while tightening the hex screw all the way. If you like a lighter feel, and more backspin, pull up slightly on the record or put no pressure on it while tightening the hex screw.
For more guides and tutorials for the RANE DJ TWELVE, make sure to visit our knowledge base at the link below:
bit.ly/2EEuVdq