BMW B48 engine coolant leak problem by two reason!!! G30 G20 F30 F40 F22 F56
ฝัง
- เผยแพร่เมื่อ 16 ก.พ. 2023
- Almost B48 engine coolant leak problem always because by two reason!!!
B48 engine is used in G30 G31 G21 G20 F30 F31 F34 F40 F87 F22 F56 - แนวปฏิบัติและการใช้ชีวิต
![[#SHORTS CLIP] ครูอึ้ง กรรมการอึ้ง ฮ่าๆ l ซานิเบาได้เบา l One Playground](http://i.ytimg.com/vi/qeBTuMJs4t0/mqdefault.jpg)
nice video, I think I may have the same problem. Gonna have to get it exposed to find out for sure.
Really helpful thank you 👍
請問也是台灣人嗎😊
謝謝你的影片 幫助很大
我也是很喜愛diy BMW
Wow, you made a big mess there 😂
What are the part numbers, please?
Мотор B48, готовься, к 120 тыс. будешь менять еще раз трубку от блока, патрубок от головки цилиндров, стакан масляной в сборе, помпу в сборе, систему ванос и сайленблоки еще раз))) и это без чипа)
Thanks for the detailed video! One question.. Did you have to refill coolant after changing the expansion tank to cylinder head hose? And bleeding the air out after this operation or it´s not needed?
yes. complete coolant flush and bleed
Man you should've done the oil cooler gaskets or cooler itself while you were there. I've done about 10 already
Yes but bit expensive no need for it as its just the pipe leaking, same thing happend to me 1month ago just changed the pipe
great job, where can I get the silicone cooling hose?
Aliexpress
You dont need to take the manifold off.. you did all this extra work for nothing.. this hose can be changed in less then 10 minutes.
Cool! thank you for comment. Is the other else hose too? I changed hose seat also.
He didn’t watch the whole video to see the hose adapter coming off the block and the rad hose leaking. You do have to take the intake off for that one. Unfortunately you can’t tell but your oil filter housing is decomposing as well and should be changed while you are in there.
@@James0u812 yes, you are right! Oil filter should be change in this job.
What if needing to replace the upper radiator hose on a 2017 540i?Do you know what will need to be removed to get to it and how difficult it would be to repair at home?
If you remove the dme you can do it