Mitsubishi Lancer 2003 ES - Spark Plugs Replacement
ฝัง
- เผยแพร่เมื่อ 21 ต.ค. 2024
- A spark plug is fitted into the cylinder head of a combustion engine and ignites the compressed aerosol gasoline with an electric spark.
Symptoms of bad spark plugs:
Reduced gas mileage
Lack of acceleration
Hard starts
Engine misfires
Rough idling
Torque Spec
Spark Plug: 19 ± 3 ft-lb (25 ± 5 N·m)
Ignition Coil Bolts: 89 ± 17 in-lb (10 ± 2 N·m)
Once again your video helped me out ! Car was jolting alot changed plugs and wires now its so much better
Great vid! Very clear; thank you!
Great video! Very explanatory.
I gotta do this soon and you make it so easy thank you!
Great Video! Thanks
Are you using lazer iridium plugs or simple ngk plugs
Thank you máster 🇲🇽
thank you
thnks for the video 6:30 u didnt put anti seize?
he said in the video ngk doesn't recommend it
thanks dude
Is that for all ngk spark plugs that it dont need antiz
According to ngksparkplugs.com/en/resources/5-things-you-should-know-about-spark-plugs , yes all NGK spark plugs should not need any antiseize.
whats spray you put on the chamber?
I bought this car as a used vehicle. Who last did the spark plug replacement on the vehicle had used some kind of silicon to hold the ignition coil plug to the spark plug. Before i proceed to remove the spark plug, I used a multi-purpose duster canister to blow all the dirt and debris out of the hole .
Why don’t GAP the plugs?
The Spark Plugs I used for the video were the NGK Laser Iridium Premium. I was afraid of damaging the center electorde so I did not gap the plugs. I have not gotten any problems so far with the pre gap.
What is the spark plug gap?
0.039-0.043
1.1 mm
What motor is that?
This Mitsubishi Lancer was originally built in Japan and the engine is the same one that came with the vehicle. The engine is a 2.0L SOHC (4G94).
Or just go one by one.
Did you just say sexteen millimeter???
Its 4g18
According to the VIN on my Lancer the engine is 4G94.
Yep, even the plate in the engine bay says 4g94