Man you're the real mvp I found three videos that skipped the part on those clips and they were the only thing i havnt encountered doing something easy as headlights
Sweet!!I was just outside trying to figure this out , luckily for me it's about to pour and it's lightning so I headed inside. I would have annihilated these !
My headlights came finally but the bolts are too long, I know you said just to adjust them but I wasn’t sure how? I don’t know if a special tool is needed but if it is I don’t know why they didn’t just send them to me adjusted correctly, probably only off about a half inch/ three quarter inch
Right on! I got my Dad's 2000 B3000 and wanted to replace the bulbs & headlight assembly, but wasn't sure what t do with those clips. THANKS! That really helped!
I’m up for being receptive to criticism. The comment suggests those who film by themselves are annoying because the camera is shaky. I have nobody else to film, therefore it’s the best I can do. I’m not saying, “Im mad, you do it”. I’m saying “If you can film it steady, by all means upload it on yours and it’ll be a better video for all to enjoy”. I literally said in the video “forgive me”. Although I don’t think it’s a huge deal, it’s helped 100s of folks and that’s all that matters to me. The goal of this channel isn’t to produce a multi-1000 dollar production video to show how to. Just an average guy filming to help someone, with what I have. That always has, and always will be the goal.
@@RandomAutomotiveYou described how to do it perfectly even with shaky camera work. Don't listen to these goobers that have to see everything done for them and can't think for themselves a little
what a pain in the ass those clips are!!!!!!! I would fire the engineer who designed them. Chevy.........3 minutes to switch out a headlight assembly, ford with those stupid crappy clips.....frustration, scratched metal, more frustration and a hatred for ford developing.
Man you're the real mvp I found three videos that skipped the part on those clips and they were the only thing i havnt encountered doing something easy as headlights
Good tip on having the clip pliers. I’m going to upgrade mine soon.
Sweet!!I was just outside trying to figure this out , luckily for me it's about to pour and it's lightning so I headed inside. I would have annihilated these !
My headlights came finally but the bolts are too long, I know you said just to adjust them but I wasn’t sure how? I don’t know if a special tool is needed but if it is I don’t know why they didn’t just send them to me adjusted correctly, probably only off about a half inch/ three quarter inch
What modifications did you have to do to fit these? I’ve got similar ones if not the same ones and there’s no way the clips will go back on.
No modifications, just placed the clips back on
At 2:08 in the video you said you had to do a little modification to them.
Right on! I got my Dad's 2000 B3000 and wanted to replace the bulbs & headlight assembly, but wasn't sure what t do with those clips. THANKS! That really helped!
Glad it helped!
I have some more b3000 vids if you’re interested! Subscribe if you haven’t, if you have welcome!
Thank you very much for your video!
Got them in and out with no problems!. Thanks Again!
Can you link the tool you have?
a.co/d/cwhNahx
Thank you!!
How to take out the clips
0:43-1:50
Nice
I'm telling you right now the 2000 ranger is close but not this
I have never been more annoyed with these clips
😂
Fkn right dude took me an hour for both lmfao
You guys that try to film and do the job at the same time are annoying, the camera is all over the place.
Film it better and post it on your channel 🤷🏻♂️
@@RandomAutomotive How about you be receptive to the legitimate criticism and get it right next time?
I’m up for being receptive to criticism. The comment suggests those who film by themselves are annoying because the camera is shaky. I have nobody else to film, therefore it’s the best I can do. I’m not saying, “Im mad, you do it”. I’m saying “If you can film it steady, by all means upload it on yours and it’ll be a better video for all to enjoy”. I literally said in the video “forgive me”. Although I don’t think it’s a huge deal, it’s helped 100s of folks and that’s all that matters to me. The goal of this channel isn’t to produce a multi-1000 dollar production video to show how to. Just an average guy filming to help someone, with what I have. That always has, and always will be the goal.
@@RandomAutomotiveYou described how to do it perfectly even with shaky camera work. Don't listen to these goobers that have to see everything done for them and can't think for themselves a little
what a pain in the ass those clips are!!!!!!! I would fire the engineer who designed them. Chevy.........3 minutes to switch out a headlight assembly, ford with those stupid crappy clips.....frustration, scratched metal, more frustration and a hatred for ford developing.
I usually try to like all brands of automakers on this channel, but you’re 100 right. I felt the same lol