How To Upgrade Your Accord's Sound System With New Front Speakers

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ต.ค. 2024
  • In this video I show you guys how I Install front Speakers on a 2020 Honda Accord. This is an easy install and it definitely make a difference in the sound system for sure. This is an Easy install. the Speakers where purchase from Crutchfield.com
    here are some alternative way to buy the parts this is an affiliate link. if you buy anything the items from amazon I will get a little kick back withc will help out the channel. thanks you all.
    anyways here is the part list
    Trim removal tools : amzn.to/48aDT0R
    Screw Driver Set: amzn.to/3RZ76WV
    Speaker foam: amzn.to/47dtHDo
    Zip ties: amzn.to/3togNol
    Speaker wires: amzn.to/48wjl2r
    Front speakers: amzn.to/3RX8KrU
    Bullet connectors
    if you buy it from crutchfield, you will also get the speakers adapters and the wiring adapters too.
    here is the Crutchfield link: www.crutchfiel...
    the are Infiniti Referecen speakers. check the video it tells you wha the model is.
    #carstomit
    #hondaaccord
    #accord
    #hondaaccordsport
    #speakerscorner
    #infinity
    Subscribe to the Channel:
    www.youtube.co...
    Thanks for Watching

ความคิดเห็น • 62

  • @tonygoodo4664
    @tonygoodo4664 11 หลายเดือนก่อน +7

    this is what I needed to see, nice details bro appreciate this video

    • @CarStomIt
      @CarStomIt  11 หลายเดือนก่อน +1

      Thanks bro I appreciate it.

  • @UnknownUser-lo2vc
    @UnknownUser-lo2vc 21 วันที่ผ่านมา +1

    Where did you get the tweeter bracket? I can not find it all over the internet! 😅

    • @CarStomIt
      @CarStomIt  21 วันที่ผ่านมา +1

      This is the bracket that cone either the component speaker I just customized it to make it work for the Accord.

  • @skywarp8611
    @skywarp8611 6 หลายเดือนก่อน +3

    Half way watching your video, I am very confident to replace my speakers 😂😂😂😂

    • @CarStomIt
      @CarStomIt  6 หลายเดือนก่อน +2

      lol nice. I am glad. This makes me Happy. Good luck.

  • @wavy2k
    @wavy2k 9 หลายเดือนก่อน +2

    This was a 36000 car for the accord touring it sucks that the sound idn’t premium

    • @CarStomIt
      @CarStomIt  9 หลายเดือนก่อน +2

      I agrée with you 100000% I think in the USA we don’t demand enough features. So they give us the bare minimum. And we don’t complain about it. This sucks

  • @OMAR-5656
    @OMAR-5656 15 วันที่ผ่านมา +1

    Hi. Did you cut the factory eom connector for the oem speakers? I had mine 4 speakers and tweeters replaced last week with an amp and today I saw that the two front speakers don’t have the original connector just the rear speakers have it 😢 is there any way to fix it?

    • @CarStomIt
      @CarStomIt  14 วันที่ผ่านมา +2

      Nope. I bought adapter for the front and rear so none of the factory speakers wires were cut. I used the speaker adapter so that I do t have to cut any wires.

    • @OMAR-5656
      @OMAR-5656 14 วันที่ผ่านมา +1

      Oh dude I don’t know why they did that to me

    • @OMAR-5656
      @OMAR-5656 14 วันที่ผ่านมา +1

      You know if I wire them back my amp will stop giving power to the speakers?

    • @CarStomIt
      @CarStomIt  14 วันที่ผ่านมา +1

      @OMAR-5656 I hate having to cut OEM speakers wires. But sometimes some shops will cut corners and do a super crappy job just so they can get the money. Get you in and out as soon as possible. I don’t like to do that. I prefer to do the job right, with the right parts. It will cost more but I know the job will be done right.

    • @OMAR-5656
      @OMAR-5656 14 วันที่ผ่านมา +1

      @@CarStomIt I’m so pissed dude

  • @ChristopherAdamsRealtor
    @ChristopherAdamsRealtor หลายเดือนก่อน +1

    Love all your videos, im going to put in the folding mirror kit at some point. But I've already upgraded my front speakers with inline crossovers but not looking to upgrade to external crossovers and a new head unit with a better dsp. What are the colors of the feed wires for the crossovers?

    • @CarStomIt
      @CarStomIt  หลายเดือนก่อน +1

      Are you talking about for the front or the rear. I used the OEM wires and connected them to the cross over and from there I put the tweete separately from the woofers. Is that what you mean.

  • @MichaelCalhoun-i6b
    @MichaelCalhoun-i6b 8 หลายเดือนก่อน +1

    I just bought a new pair of component speakers but they have an inline crossover instead of the external, can you explain how you spliced/wired the woofer and tweeter? Thank you, great video!

    • @CarStomIt
      @CarStomIt  8 หลายเดือนก่อน +1

      Basically. I used the factory speakers and connected it to the crossovers and from there I can get woofer and tweezers outputs. So I didn’t really cut any wires.

  • @tmac1293
    @tmac1293 7 หลายเดือนก่อน +1

    Have you done the amp or subwoofer yet for the 2020 Accord? Doing these speakers now but want to do those next

    • @CarStomIt
      @CarStomIt  7 หลายเดือนก่อน +1

      Actually I’m working on it today. I’m excited for that one for sure.

  • @DanielR-kb3hd
    @DanielR-kb3hd 9 หลายเดือนก่อน +2

    How did you wired the crossover? Where did you get the signal to the crossover from?

    • @CarStomIt
      @CarStomIt  9 หลายเดือนก่อน +1

      I wire the crossover ABT got the signal from the car OEM wires and send it out to the mid bass and the tweeters.

    • @DanielR-kb3hd
      @DanielR-kb3hd 9 หลายเดือนก่อน +2

      Did you tap the original oem wires to get the signal? A video showing how to wire the system would be really appreciated 🙏🏻

    • @CarStomIt
      @CarStomIt  9 หลายเดือนก่อน +1

      @@DanielR-kb3hd technically yes. I remote the O speakers and used an adapted from crutchfield that came in the box when you buy a set of speakers from them. Then I connected it to the crossover box then I then get the sound for the woofer and the tweeters from there and going out to the speakers 🔊. Hopefully you under what I am trying to say.

  • @dsz8759
    @dsz8759 8 หลายเดือนก่อน +1

    Does the blind spot warning works? Since you are not using the factory tweeter harness I wonder if it works.

    • @CarStomIt
      @CarStomIt  8 หลายเดือนก่อน +1

      Yes his BlindSpot monitor is Still working the same way.

  • @jbmjbm323
    @jbmjbm323 8 หลายเดือนก่อน +1

    Great Video. I was gonna ask if you used the factóry or aftermarket amp but ssw another post and you said factory. So that answered my question. Nice speskers!

    • @CarStomIt
      @CarStomIt  8 หลายเดือนก่อน +2

      Yeah still using the Factory amp. Plus This car toes not have the Premium System. so No Amp. This Year we will be Adding an Amp and Rear Sparker as well. Waiting for the Weather to get Better.

  • @ThePrometheus617
    @ThePrometheus617 9 หลายเดือนก่อน +1

    Can you give us a link to some the the equipment ? Especially for the Crossover Tweeter

    • @CarStomIt
      @CarStomIt  9 หลายเดือนก่อน +1

      Off course. I have updated the descriptions please check it out now. let me knw if you need something else.

  • @Hadesccc
    @Hadesccc 11 หลายเดือนก่อน +2

    What’s up bro , where did you get the new brackets from ?

    • @CarStomIt
      @CarStomIt  11 หลายเดือนก่อน +2

      I ordered the Speakers from Crutchfield.com..So when you order speakers from them they will give you Free Installation kit. In this case they were Speaker brackets

    • @buffedupernie8727
      @buffedupernie8727 11 หลายเดือนก่อน +1

      It seems like when I try the car fit and put Honda the 2024 accord doesn’t come up

    • @CarStomIt
      @CarStomIt  11 หลายเดือนก่อน +1

      @@buffedupernie8727 is your car 2024 model. So the body styles is different but the backers might ne the same. You might have to open the door panel so you can see what the backer looks like. Crutchfield pro hasn’t had a chance to make a write up about that car yet.

  • @TeenageShutdown01
    @TeenageShutdown01 3 หลายเดือนก่อน +1

    Since the car has crossovers, the front factory speakers could effectively be replaced with raw drivers like Seas, Dayton, etc. Is this correct?

    • @CarStomIt
      @CarStomIt  3 หลายเดือนก่อน +1

      Yes and No. each speaker’s crossover are specifically used for a specific speakers the speaker may work but not may not sounds good or it might die. Sit it all depends. So it’s Not that Simple.

    • @TeenageShutdown01
      @TeenageShutdown01 3 หลายเดือนก่อน +1

      I had a duuuuy moment. It would make much more sense to install an external crossover, like you did, and then just use raw driver components.

    • @CarStomIt
      @CarStomIt  3 หลายเดือนก่อน

      @TeenageShutdown01 yeah I agree this is better way lol.

  • @farhansami926
    @farhansami926 7 หลายเดือนก่อน +1

    I have accord 2020 I wanted to add jbl GTO609C both front and rear speakers but factory amp can handle it?

    • @CarStomIt
      @CarStomIt  7 หลายเดือนก่อน +1

      If you have the OEM amp it probably can give you your what you are looking for. It will play fairly okay. But to really get what you pay for, you’re gonna have to go Aftermarket.

    • @CarStomIt
      @CarStomIt  7 หลายเดือนก่อน +1

      I’m in the process of buying An amp and installing it in a few days

  • @kjp58103
    @kjp58103 5 หลายเดือนก่อน +1

    Crutchfield does not have it anymore. Where do you recommend i get it poum ka jwenn bracket yo tou?

    • @CarStomIt
      @CarStomIt  5 หลายเดือนก่อน +1

      I always order from crutchfield. They are the only company o know will send you free bracket. All other company will make you pay for them. You could try Sonic electronics. I have not order from them in a long time so mwen pas konnen parlé avec yo. They can recommend some good 🔊. Bonne chance.

    • @kjp58103
      @kjp58103 5 หลายเดือนก่อน +1

      So what if I use the same pioneer for the front?

    • @CarStomIt
      @CarStomIt  5 หลายเดือนก่อน +1

      @@kjp58103 you can those are good speakers as well. But we install an amp on that car and they sound even more Amazing. You will definitely see a difference though.

  • @david029014
    @david029014 10 หลายเดือนก่อน +2

    Did u use factory amps or Aftermarket amps?

    • @CarStomIt
      @CarStomIt  10 หลายเดือนก่อน +2

      Still Factory amp, We will be add an aftermarket next year 2024. but for right now it is stock amp.

    • @david029014
      @david029014 8 หลายเดือนก่อน +1

      @CarStomIt I'm going full Amps upgrade with DSP. Down4sound jp8 amp for subwoofer box, down4sound jp95 amp 5 channel amp for interior speakers, down4sound sfx 6.5 speakers for doors and deck, 8" down4sound sfx for rear deck woofer, and audio control dm-810 DSP. 1 12" sundown e12 in a down4sound pro fab box. I wanna upgrade headunit to a belsee 12.3" or navirider 13" head unit, but I am waiting on more reviews on them first. Oh and kilmat sound deadening

    • @CarStomIt
      @CarStomIt  8 หลายเดือนก่อน +1

      @david029014 very nice. I am going to also do a 5 channel amp as well. Not sure which one yet. Definitely one with a DSP maybe the Kenwood. Depending on budget. We are going to look for a fab corner sub box too but we have to wait for better weather.

  • @onelam22able
    @onelam22able 7 หลายเดือนก่อน +1

    Great Work!!! Are you near NC??? Do you install

    • @CarStomIt
      @CarStomIt  7 หลายเดือนก่อน +1

      I live in CT so a couple hour from you

  • @ProShotz762
    @ProShotz762 11 หลายเดือนก่อน +3

    Brother thank you so much for this video, am installing the same infinity speakers on mine right now

    • @CarStomIt
      @CarStomIt  11 หลายเดือนก่อน +1

      No problem man. No problem at all. You should enjoy them. I like them a lot.

  • @jimbrohammer3270
    @jimbrohammer3270 10 หลายเดือนก่อน +1

    I wouldn't think you would need the crossover, since the car comes with tweeter the amp should only be sending the highs to them, correct?

    • @CarStomIt
      @CarStomIt  10 หลายเดือนก่อน +2

      I know, but the speakers come with a cross over, so I am not using the Connections for the Tweeter. the way that I am connecting them is going from the car wirings to the crossover, then to the speaker then to the tweeter.

    • @jimbrohammer3270
      @jimbrohammer3270 10 หลายเดือนก่อน +1

      @@CarStomIt Cool, you did a great job, I just added a sub to mine, now I need to fix the rattles in the back deck, LOL

    • @CarStomIt
      @CarStomIt  10 หลายเดือนก่อน +2

      @@jimbrohammer3270 We are going to also add a sub as well we are now shopping for some black friday deal. also I have a video to help with the rattle that I did on another Accord. l Check this link out. th-cam.com/video/9dwTrugEitk/w-d-xo.htmlsi=71dXkKlUIFXYuYDa

    • @hassanamen332
      @hassanamen332 10 หลายเดือนก่อน +1

      so connecting the speakers to the cross over will only take power without any benefit, if we didn't install the crossover it will be the same or better results isn't ?

    • @jbmjbm323
      @jbmjbm323 8 หลายเดือนก่อน +2

      ​@@hassanamen332the speaker he bought came with a crossover box kit to sperate the highs for the tweeter and the crossover box sends mid range frequençy to his mid range speaker. With stock tweeters, it comes with its own crossover but not as high end like on that crossover box. And for the stock speakers, it is more like a full range speaker which sounds harsh when you turn up the volume compared to his new ones.