Chicken Dinner Gamer good choice as the project head of the armored division in my team I suggest using a heavily modded one with cheap darts that have solid heads as this can penitrate light armor at OK ranges
5:35, You should remove that lock because if you remove the other locks, that lock will not function properly and it might click and lock your blaster from priming sometimes.
Mmmm, turf springs feeling heavier than what they advertise it as? Not for me, my NT 8kg LS spring feels weaker than my BlasterTECH 8kg. May just be retaliator springs but who knows. The chronobarrel is reading high because it is directly in front of the dart gate so it is reading the darts 3cm before they leave the barrel while wit a normal chrono would read normally as the sensors are not directly in front of the muzzle.
8:24 when you say "Break it too quickly" you mean the catch or some other internals? I got a 7 kg spring and a metal catch on order (with upgraded spring as well so I'm kinda wondering if I need other things.
I tought of a 9kg spring, but now that 6 already makes a difference... Would a 9kg spring with the WORKER Metal Side Pull Attachment kill the inside? The idea is to change it to sth more sniper rifle like.
Only if you get a lot of metal parts and reinforce the shell. If you're going that heavy, you might as well go the prophecy shell route and get an expanded plunger tube and power stock
What did you do with the trigger? You measured the piece and then it cut to you saying you added 3 pieces..where? when? why? (you said why nvm that question)...
If you look closely you can see some white pieces (3 stacked on top of eachother) they decrease the pull distance which makes it feel better for some people. It's doesn't impact the performance or lifetime of the blaster
9 kg is a bit to much imo but I would recommend 7 kg for a more simple type mod. But if serious power is what your looking for then yes 9 kg is good with maybe a katana mag. Nevertheless have a great day!
Valour's Blasters yeah but the gun doesn’t make a sound when i pull the trigger, it doesn’t shoot, the magazine doesn’t go in right and i can’t use the slide when the magazine is in, and the catch mechanism isn’t working right when i’m almost positive i put it in right
So I am currently modifying a Retaliator with a 9kg spring and metal catch from OutOfDarts. However, every time I try to prime it, it doesn't stay primed, it just leaps back to the original position and doesn't prime and fire. How do I fix this?
I tend to not remove the air restrictor in most elite blasters because it doesn't get you much more performance and will end up killing the blaster eventually
@@ValTek_Armory if you dry fire it, yep, it will eventually break the plunger rod, but it does seem to gain performance a little even in elite blasters, when paired with an upgrade spring
Now that you’ve upgraded its spring, how about seeing if this barrel extension makes it better or worse: www.tinkercad.com/things/8g9oEpwpTA7-nerf-retaliator-barrel-extension
![Worker Basic and Luxury kits for Nerf Retaliator [Nerf Modding]](http://i.ytimg.com/vi/tVfkZw1_yew/mqdefault.jpg)
![Worker Basic and Luxury kits for Nerf Retaliator [Nerf Modding]](/img/tr.png)
thanks, my retaliator broke over 3 years ago and now i have finally fixed it!
My Retaliator is actually suffering from low fps, so that's why I want to mod it a little as it's my primary. My secondary is the Disruptor.
Chicken Dinner Gamer good choice as the project head of the armored division in my team I suggest using a heavily modded one with cheap darts that have solid heads as this can penitrate light armor at OK ranges
5:35, You should remove that lock because if you remove the other locks, that lock will not function properly and it might click and lock your blaster from priming sometimes.
I thought your pic was a piece of hair on my screen thanks for hurting my fingers lol
@@jetsflyingoffatrain4338 hahahahaaaa lol
@@LM_LaserMan hahahahahaha *no*
Should probably hold the gun level when getting speed readings
Song is "Oh, it's you."
The Hat in Time OST is full of bops
Mmmm, turf springs feeling heavier than what they advertise it as? Not for me, my NT 8kg LS spring feels weaker than my BlasterTECH 8kg. May just be retaliator springs but who knows.
The chronobarrel is reading high because it is directly in front of the dart gate so it is reading the darts 3cm before they leave the barrel while wit a normal chrono would read normally as the sensors are not directly in front of the muzzle.
Your priming mechanism also contributes to priming weight
I guess then to get more accurate readings use the Mediator carry handle attachment and then attach the chronobarrel onto that
8:24 when you say "Break it too quickly" you mean the catch or some other internals?
I got a 7 kg spring and a metal catch on order (with upgraded spring as well so I'm kinda wondering if I need other things.
You should be fine
Your cronobarell is reading high because u pointed it down
What are the spring's dimensions?
I tought of a 9kg spring, but now that 6 already makes a difference... Would a 9kg spring with the
WORKER Metal Side Pull Attachment
kill the inside?
The idea is to change it to sth more sniper rifle like.
@brandon cho I'm pretty sure you have to take out the AR to brass a breach. I recommend padding the plunger head with some crafts foam
I have a broken slideblock 🤪😭 it's sucks to repair
Slideblock? Do you mean sled? If so, you can get a cheap replacement from worker
Would it be fine if i put a 18kg spring in there? I was thinking of buying a 18kg spring but thought i ask for advice
Only if you get a lot of metal parts and reinforce the shell. If you're going that heavy, you might as well go the prophecy shell route and get an expanded plunger tube and power stock
do they have same spring size as delta trooper...
Yes. Several elite blasters use the same size spring
@@ValTek_Armory thanks man :)
IMPORTANT!
do not use very powerful springs, your blaster's plastic will break
that is why you pad your springers. most spring kits for things come with a silicone or foam pad. alternatively, use a stronger shell like a prophecy
@@ValTek_Armoryhow do u put the padding
@@the_ghost7973 if you get the worker kit, the pad will just fit into the front of the plunger tube
How heavy is the apollo spring?
What do I do if a 9-kg spring can’t be caught by a metal WORKER catch?
Increase the catch spring more
Make sure the plunger tube is in the right way
What’s the kg of the original retaliator spring?
2.5
Wong yew xuan thanks
So for the lock in the plunger we dont need the spring, correct?
My Chrono barrel reads slightly low.
They are inconsistent because darts can vary ever so slightly in length, but hey, they are only $15
Valour's Blasters wouldn’t the chrono velocities depend on the blaster since their springs are/aren’t broken in yet?
My nerf is not reloading from upside
What did you do with the trigger? You measured the piece and then it cut to you saying you added 3 pieces..where? when? why? (you said why nvm that question)...
If you look closely you can see some white pieces (3 stacked on top of eachother) they decrease the pull distance which makes it feel better for some people. It's doesn't impact the performance or lifetime of the blaster
I want a spring of 9 kg please provide me
is it a bad idea to upgrade the retaliator to a 6kg spring without changing to a metal latch/catch too?
the plastic catch can handle the 6kg just fine with a better catch spring.
its fine to leave all the locks in right?
Yep
@@atnorange5491 any ideas on what to do if the metal worker catchspring cant catch the 9kg spring
@@wongyewxuan3880 replace the 9kg spring with a weaker one. Sorry the springs too strong
@@atnorange5491 yeah i had to revert it
no way of getting a 9kg to hold with stock internals other than metal catch?
@@wongyewxuan3880 yeah?
Would a 9 KG spring from Worker mod be good for the Elite Retaliator?
9 kg is a bit to much imo but I would recommend 7 kg for a more simple type mod. But if serious power is what your looking for then yes 9 kg is good with maybe a katana mag. Nevertheless have a great day!
I'm waiting on a worker 9kg now for my pump action retaliater I'll let you know
@@friendbesto2599 so how was it
So uh how about a 12 kg spring?
same process, but I recommend getting a metal catch and better quality plunger
@@ValTek_Armory thanks for the advice and 1 question how about a 7kg would that be ok?
7kg is fine on stock catch, but you'll want a stronger catch spring
@@ValTek_Armory can you help me find the kit for the 7kg or is it easier to just do the 6kg one for just the spring?
@@ValTek_Armory "The Worker 7kg modification on Amazon" is that good? Or no
Will anything happen if I use a 12KG spring
That's too much power for a standard breech to take advantage of
Valour's Blasters can i do anything to fix it?
@@ValTek_Armory Is a 7.8KG spring ok to use?
@@mohdarifmohdzim5206 hi boi
@@nuraliyahmohdarif8604 hoi m8
How do i take of the lock?
Depending on the one, you can just cut it
Yes... and where could I found the spring???
Clarx \j7 just look on eBay. Whatever spring he uses search up with nerf at the end.
@@kruisader3917 thanks you
Blastertech.com
Look up 5.5kg spring
Dose this mod Gide still work on a recon m2
The mk2/3 is basically the same inside, so yes
@@ValTek_Armory oh okay thanks
Can you modify only the first spring
Yes but it will fire without you pulling the trigger sometimes (Just get a spring from a cheap ball point pen)
what spring did you use?
I believe I used the 6kg. this is an old video, so the best way is to watch
Does this work with any nerf guns?
most springers. you'll need specific springs though. different blasters use different springs
can we mod surgefire like that
The surgefire can take mods, but not as easily or as well as the Retaliator
Yes finally i am the first person too see a video
Lol I found an old comment
Thanks this is great for us noobs 😊
Where can you buy the springs?
I buy my turf springs from foamfreaks now
@@ValTek_Armory I searched it up and went to the first link but it said that the url was wrong
My blaster jamed what do i do?
Use the jam door and unjam it
Also really nice vid, i probably will still kill my retaliator trying it oh wait i did had a friend fix it then i sold it
How much would it cost for you to make a kronomag?
mine didn’t work and now my retaliator is don’t for lmao
did you upgrade your catch spring?
Valour's Blasters yeah but the gun doesn’t make a sound when i pull the trigger, it doesn’t shoot, the magazine doesn’t go in right and i can’t use the slide when the magazine is in, and the catch mechanism isn’t working right when i’m almost positive i put it in right
So I am currently modifying a Retaliator with a 9kg spring and metal catch from OutOfDarts. However, every time I try to prime it, it doesn't stay primed, it just leaps back to the original position and doesn't prime and fire. How do I fix this?
is your plunger tube properly aligned in it's slots? They can come out of position while reassembling and cause this problem.
What readings can you expect from a 9kg spring?
Not sure
You could've got a bit more performance if you poped out the air restrictor, but great mod guide nonetheless
I tend to not remove the air restrictor in most elite blasters because it doesn't get you much more performance and will end up killing the blaster eventually
@@ValTek_Armory if you dry fire it, yep, it will eventually break the plunger rod, but it does seem to gain performance a little even in elite blasters, when paired with an upgrade spring
@@jforgeuk1766 I tend to go more for longevity even if it kills performance a tiny bit.
greattttttttttt
Well I just wasted 20 bucks trying to do this
What happened?
@Valour's Blasters well I killed my nerf retaliator trying to do this
@@opz_specs6902 which part of the internals break and what spring did you use
Now that you’ve upgraded its spring, how about seeing if this barrel extension makes it better or worse: www.tinkercad.com/things/8g9oEpwpTA7-nerf-retaliator-barrel-extension
Who is that one dislike?? Lol
the fact that he is married is depressing
why would you say that
what size is the spring in mm, i cant get a hold of worker springs