Part 4 of 6 Ford Ranger Ford Everest Mazda BT50 3.2 Intake Manifold Clean Full Details

The intake on modern diesel engines are prone to carbon deposits because of the EGR set up. This causes poor running and poor fuel efficiency. This 6 part series shows the step by step details to remove the intake, clean the carbon and replace the intake.
This video was done on a 2016 Ford Everest 3.2 with 215,000km. Models may have slight variations but the bulk of what you see here will be the same.

[@Narcissistic74]

great video,very informative.

[@killawattgarage]

Thank you!

[@corier8871]

Very informative mate. My 2013 ranger is throwing p042f egr valve stuck closed. Wondering if doing this clean and trying to free it up would fix it

[@keysersoze6854]

Great vid, how often would you recommend doing this I have a 2019 wildtrak with 63k on clock, cheers

[@jaedenjewell4023]

Hey mate, great videos! Do u know if there is meant to be a gasket for the egr motor on a px2 ranger? And would it matter if i goes back without one.
I have pulled mine off following your vids but mine doesnt appear to have one? Cheers

[@eugeneconcepcion3792]

What is the KM's on the odometer?

[@Shanhih]

The torque spec for the Ranger glow plugs is 13nm

[@killawattgarage]

Thanks for the tip

[@SCKAPEE]

Did you clean intake channels in the cylinder head? If so wow you did it?
Thanks

[@killawattgarage]

Yes I did. But they were surprising clean. Used a vacuum and a small brush.

[@MarcoAntonio-df7sl]

why don't you clean the head? it must be quite dirty as well? you could have removed the diesel filter assembly to make it easier to take the pieces apart

[@killawattgarage]

Surprisingly the head ports were reasonably clean. Yes removing the filter assembly gives much more room. Cheers

[@NotYourAveargeAlien]

Is the 2 ltr Bi Turbo, pretty much the same? Cheers great series of Vids

[@killawattgarage]

same process but different engine

[@usamawarraich7571]

I did my intake clean today and put everything back i should but something went wrong my car starts but cant run no power miss firing

[@nothingmuch.3014]

Did you take the motor off of the egr valve?
The cam on the motor needs to align correctly with the notch inside the egr valve

[@thiagofpss]

how much intake manifold torque?

[@krigercarebru1691]

16nm in 3 stages: 5, 13 and 16

[@jakekiddall5108]

What a failure in engineering this engine is.

[@hughwynn6193]

Sell the Ranger and buy a Tacoma. Problems solved