I thought it was a bad idea cutting with no eye protection or guard... but then I saw him kneel down and hammer the glass with no eye protection... Please be careful brother, one shard in your eye will put you in an world of agony. Peace from Australia
aaah, they live on the edge there in India, It's a wonder he didn't just have a pair of thongs on. I love watching them. Better than the over regulated "nanny state" that we live in. With our hi-vis vests and our safety boots and the need to have a "ticket" to do just about anything.
गर्ग जी क्या टफन ग्लास को काटा जा सकता हैं और क्या टफन ग्लास में होल किया जा सकता है अगर काटा जा सकता है या होल किया जा सकता है तो टूल का नाम बताएं धन्यवाद नमस्कार
I am watching this video because recently I successfully cut tempered glass with a 30mm diamond cutoff (with fine diamond) wheel attached to an electric drill, with water as a lubricant. Today I tried cutting a larger sheet of tempered glass with a more coarse 125mm diamond cuttoff wheel that I fitted onto a milwaukee 18v circular saw, for the accuracy. The glass exploded into a million pieces almost instantly. I wonder what I did wrong. Was it speed? The fineness or coarseness of the diamond particles within the saw? Was it the glass itself?
It is impossible to.cut tempered glass due to the prince rupert drop effect . You can work it ie take off a couple of mm each edge other than that nope . 24 yrs in the glass trade.
@timwade8529 so cutting a couple mm each pass is best. Have a 3"width, 8' long, 1/4" thick glass I used an expensive glass cutter. Made about 30 passes. I'm still not sure if I want to attempt.
Like @timwade8529 said. YOU CANNOT CUT TEMPERED GLASS!!!!! Even if you succeed in what ever process you choose, including polishing/grinding it down a few 32nd. The glass is forever compromised. I’ve done it, worked a whole day, worked half of the next, and watched it blow up, laying flat on carpet table on our lunch break. Only polished two sides one time, and removed 1/16 total a 1/32 side.
yes i have been cutting glass for 40 years he's only cutting normal glass with a grinder with a diamond blade when glazier screw up which is quite regularly we able to polish a couple of mm a side in line polisher machine we normally tape it first off but very slow speed works most the time
I thought it was a bad idea cutting with no eye protection or guard... but then I saw him kneel down and hammer the glass with no eye protection...
Please be careful brother, one shard in your eye will put you in an world of agony. Peace from Australia
Ok sir
aaah, they live on the edge there in India, It's a wonder he didn't just have a pair of thongs on. I love watching them. Better than the over regulated "nanny state" that we live in. With our hi-vis vests and our safety boots and the need to have a "ticket" to do just about anything.
bro I fitting Toughned glass of all types bus. plz I do job in Australia how
www.youtube.com/@Ratan.mondal.glass.2022
Great singing in the background 🔥🔥🔥
This is a joke !
This not a tempered glass .
Tempered glas will breaks in million peaces
www.youtube.com/@Ratan.mondal.glass.2022
He broke it at the end it broke into thousand pieces
Kaam 60 % entertainment 100 % 🤣🤣
Not possible cut toughend glass this is he glass
the limit is 4.5mm
www.youtube.com/@Ratan.mondal.glass.2022
Amzing work
What type of cutting wheel that u r using
www.youtube.com/@Ratan.mondal.glass.2022
Not impossible
I thought it was... I thought when glass is tempered it can't be cut... how does this work?
Fake bro just for fun and views
How you say that's toughened when it dusted into powder when hitting it with a hammer?
Yes
😂 😂 😂 Lol.. Bro that's the quality of a tuffened glass.. It never got broke into pieces, but shattered.
www.youtube.com/@Ratan.mondal.glass.2022
Bhai ye kon si blade use kr rha tu?
www.youtube.com/@Ratan.mondal.glass.2022
गर्ग जी क्या टफन ग्लास को काटा जा सकता हैं और क्या टफन ग्लास में होल किया जा सकता है अगर काटा जा सकता है या होल किया जा सकता है तो टूल का नाम बताएं धन्यवाद नमस्कार
IAM Salim form Kerala witch cutting wheel using ??
4 cuting wheel
Haraam cutting wheel!
www.youtube.com/@Ratan.mondal.glass.2022
👍
Good work
कौन से blade से काटा है भाई
Bhai ye blade kon si h
Not possible Not possible
Very good bro
I am watching this video because recently I successfully cut tempered glass with a 30mm diamond cutoff (with fine diamond) wheel attached to an electric drill, with water as a lubricant. Today I tried cutting a larger sheet of tempered glass with a more coarse 125mm diamond cuttoff wheel that I fitted onto a milwaukee 18v circular saw, for the accuracy. The glass exploded into a million pieces almost instantly. I wonder what I did wrong. Was it speed? The fineness or coarseness of the diamond particles within the saw? Was it the glass itself?
It was both the speed of the saw being much slower, and the coarse grit.
It is impossible to.cut tempered glass due to the prince rupert drop effect .
You can work it ie take off a couple of mm each edge other than that nope .
24 yrs in the glass trade.
@timwade8529 so cutting a couple mm each pass is best. Have a 3"width, 8' long, 1/4" thick glass I used an expensive glass cutter. Made about 30 passes. I'm still not sure if I want to attempt.
Like @timwade8529 said. YOU CANNOT CUT TEMPERED GLASS!!!!! Even if you succeed in what ever process you choose, including polishing/grinding it down a few 32nd. The glass is forever compromised. I’ve done it, worked a whole day, worked half of the next, and watched it blow up, laying flat on carpet table on our lunch break. Only polished two sides one time, and removed 1/16 total a 1/32 side.
Very good ,
Wah bhai kya Kamal kardiya
Very nice
Sir muja 4m temper galas katna ha kase katu
It's possible wow😊😊
Price mecine
Awam ko ulu banaya. Ja raha hai tuffun glass ki cutting
Nai ktta tafan glass chuiya bnaya ja rha h maine is video ko dekh ke kata h ye glt h chura chura ho jata h glass
What wheel he is using
4" cutting wheel
9988047141
@@Vevekjain22😂😊
Hello bhai mere toughened glass me niche se chip nikal gai hai kya ise grander se ghiss sakte h??
Ha ghis sakte h 6mm tak
Gud
Hello friends keyse hi
Very good work bro 👍👍
www.youtube.com/@Ratan.mondal.glass.2022
Bhai please
Hamare 20 glass ki sizes badi ho gai aajao na tuff Glass katwane hai
4" cutting wheel se kat lo g
Muje cut karvana hai tuffn glass
This is not tough glass fake
4” diamond cutting wheel or steel blade
Yahi mujhey puchna hai cutting wheel ja steel cut
Very nice
What toughened glass is this? Strange that at the end he hits and destroys a corner without total breakage.
Tuffend glasses are like dat
simple, not toughened glass no matter what they said. You cannot cut tempered/toughened glass...period.
www.youtube.com/@Ratan.mondal.glass.2022
Hello
As far as I know, toughened glass can't be cut
Bhai ji Jammu ke liye karigir milega?
Ha
Bhai.meranaam.sarwar.he.mae.hayedrabad.se.hu.maebhi.karigar.hu..mujhe.aap.ka.numbar.dijiye.pleeaz
9988047141
It's not a toughened glass
www.youtube.com/@Ratan.mondal.glass.2022
Konsi company ka glass h yo bhai
www.youtube.com/@Ratan.mondal.glass.2022
Sir ji Dimand ct wheel se ka jayega plz mobil No bhejo bat karni hai kamal kardi Aap ne👌👌
you cut my tempered glass. Do you have a chance to tell what you use while cutting?
Call me9988047141
www.youtube.com/@Ratan.mondal.glass.2022
Vich
Chutiya bnanya ja rha h nai ktta tafan glass mai kat ke dekha hu chura chura ho jata h
Tafan gilas katne ka tarika
Smart work 👏 👌
www.youtube.com/@Ratan.mondal.glass.2022
Thiss fake video cutting of toughened glass
yes i have been cutting glass for 40 years he's only cutting normal glass with a grinder with a diamond blade when glazier screw up which is quite regularly we able to polish a couple of mm a side in line polisher machine we normally tape it first off but very slow speed works most the time
It's a fake video
Why make public fool its not toughened glass
TH-cam per speaker kharab ho chuka
Blade konsi use kei
Tafan glass nhi kat skta
we can't cut toffen glass
www.youtube.com/@Ratan.mondal.glass.2022
22ji AAP Kaha par Kam Karte ha
Sir 5mm cutting ho jau ludhiana punjab toh aj
Veer mereya toughened glass nahi katda eh bewakoof bna reha hai
@@Chota_Gamer2009 tusi kehrey city toh veer g
Bhai mere paas 12mm ke 11 toughened glass h 4×6 ke. Uski cutting kaise karen .. aur blade konsa use kare.. pls muje comment karke batana 7837579066
www.youtube.com/@Ratan.mondal.glass.2022
Pagl bnave
ফালতু
Fack
Abe tu jo kata wo bada glass hai aur jo foda wo chota hai
Aapka mo no bhejo
9988047142
9988047141
Blade konsa hai bhai
4" cutting wheel
4" cutting blade