It would have been better if you separated the 2 door and 4 door intallation guide instead of going back and forth between the 2 because there are some sections you label for 2 door model installation when it actually applies to the 4 door as well. A little confusing.
Just installed my Sunrider top for a 4 door Bronco. Was a little confused on which hole was needed to attach the rail to the top. In the vid you said the second hole up front the bottom for the bolt and it would line up. . Did that and the top would not come all the way down. Removed it and went to the 3rd hole up from the bottom and that did the trick.
Looks great!! i just traded a 2021 Bronco with a soft top for a 2022 Bronco with the MIC hard top since 6-7 month of the year it is cold and wintry mix. I will consider this next spring but will want to remove it come fall and put the two hard top panels back in place.
QUESTION -- it's almost winter and I would like to put my hard top back on for the cold weather. Are there any good instructions on switching back, or do I need to reverse ALL steps in this video?
That's what's keeping me from buying one for my Bronco. Loved having it on my Jeep but a HUGE value of the Bronco is the removable top over the 2nd row.
I don't have videos showing how to remove the tops, however once you remove the screws that attach the sunrider to the Hardtop then you remove the bolts that secure the door rails and the top comes off
I went thru this install video and think I did everything correctly for a 2022 4Door Bronco. Everything seemed to fit like it was suppose too but when I went to close it the top would only come half way to being closed. It stop hard and can not force it. I don't want to damage anything. What am I missing on this? Thanks Mark
Called costumer service about this - said you need to force it with two people for the first two weeks. Not sure about that to be honest. Will see how it works for a month. Did you figure yours out or return it ?
Mark, I'm having the same problem.. Installed it today, and the leading edge comes about 4 inches from the top of the windshield and stops.. I'd have to force it in order to latch it. I notice when I try to push it down, the back side of the sunrider starts to pull away from the center hard top panel causing a significant gap (i.e. air, water, etc...). I too followed the instructional video on bestop website step by step.. Not good. Note, it was about 60 degrees where I am today.. Now what??
Called costumer service about this - said you need to force it with two people for the first two weeks. Not sure about that to be honest. Will see how it works for a month
Does this still use the z clips? I bought one for my Wrangler last year and the z clips were not easy to get right? I want to buy one for my '23 Bronco but don't want to deal with those z clips again. Also, a few comments below describe it as hard to close. I never had that issue with my Wrangler. Is that a new issue, a Bronco issue, or a fixed issue? Thanks.
Does this kit come from the factory in a box? I ordered this for my two door nine months ago. Now that it's here I have changed my mind and decided that I don't need this top. The dealership won't take it off my order and I had to walk away. I'm confused and disappointed. Now I have to order a new vehicle and wait again.
The dealer sells this top for way more than bestop does, buying from bestop is the best bet. Also bestop offers installation, they come to your house and do it for $129. I had that service done for my jeep and bestop backs the work. NEVER TRUST THE DEALER
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
![SAFEPLANET - ดาวเคราะห์ [ THE PLANET ]](http://i.ytimg.com/vi/4X1XL3I_k3c/mqdefault.jpg)
Bestop has been making quality products and offering great customer service since i have been a customer in 1989!! Hello to Crystal!!!
Thank you Anthony, we appreciate your business and continued support! And hello!!
This was the best upgrade for my jeep. I can’t wait to add this on my Bronco…when I get it.
It would have been better if you separated the 2 door and 4 door intallation guide instead of going back and forth between the 2 because there are some sections you label for 2 door model installation when it actually applies to the 4 door as well. A little confusing.
Just installed my Sunrider top for a 4 door Bronco. Was a little confused on which hole was needed to attach the rail to the top. In the vid you said the second hole up front the bottom for the bolt and it would line up. . Did that and the top would not come all the way down. Removed it and went to the 3rd hole up from the bottom and that did the trick.
For those that are unsure, is there a video showing the proper order to remove it. I know, just reverse the install but it’d be helpful. Thanks
Just got mine in the mail!!!!
Looks great!! i just traded a 2021 Bronco with a soft top for a 2022 Bronco with the MIC hard top since 6-7 month of the year it is cold and wintry mix. I will consider this next spring but will want to remove it come fall and put the two hard top panels back in place.
QUESTION -- it's almost winter and I would like to put my hard top back on for the cold weather. Are there any good instructions on switching back, or do I need to reverse ALL steps in this video?
Working backwards in the installation instructions works best!
Any plans to make one that would install over the 2nd row too? So that you can just pull it all the way back even more?
That's what's keeping me from buying one for my Bronco. Loved having it on my Jeep but a HUGE value of the Bronco is the removable top over the 2nd row.
How is it with rain? Doris t all fall down on you when you open the door
Do you have a video for the bestop sunrider top REMOVAL for a Bronco 4door
I don't have videos showing how to remove the tops, however once you remove the screws that attach the sunrider to the Hardtop then you remove the bolts that secure the door rails and the top comes off
Will this work with a JTop mesh cover on under it? The mesh cover is made to work with the hard top panels.
This is killer. I need it.
Any idea if the two door and four door tops are interchangeable like with the Jeep Wranglers?
I went thru this install video and think I did everything correctly for a 2022 4Door Bronco. Everything seemed to fit like it was suppose too but when I went to close it the top would only come half way to being closed. It stop hard and can not force it. I don't want to damage anything. What am I missing on this? Thanks Mark
hi. did you find a solution on this? i'm having the same issue
Called costumer service about this - said you need to force it with two people for the first two weeks. Not sure about that to be honest. Will see how it works for a month. Did you figure yours out or return it ?
I'm having a hard time with the installation. I feel like I've followed the instructions but I can't get it to close
Feel free to email me with pictures of the area's that are keeping the top from closing, I'll see what I can do to help! crystal.dennis@bestop.com
Mark, I'm having the same problem.. Installed it today, and the leading edge comes about 4 inches from the top of the windshield and stops.. I'd have to force it in order to latch it. I notice when I try to push it down, the back side of the sunrider starts to pull away from the center hard top panel causing a significant gap (i.e. air, water, etc...). I too followed the instructional video on bestop website step by step.. Not good. Note, it was about 60 degrees where I am today.. Now what??
hi. did you find a solution on this? i'm having the same issue
Called costumer service about this - said you need to force it with two people for the first two weeks. Not sure about that to be honest. Will see how it works for a month
The first time closing we had to force it more than I liked but it finally closed. Wish they had said it needs to be stretched at first.
Will this fit on my ford bronco 4 door that already has the sunrider on it?
Will this work with OEM roof rails and crossbars on?
Does this still use the z clips? I bought one for my Wrangler last year and the z clips were not easy to get right? I want to buy one for my '23 Bronco but don't want to deal with those z clips again. Also, a few comments below describe it as hard to close. I never had that issue with my Wrangler. Is that a new issue, a Bronco issue, or a fixed issue? Thanks.
The Sunrider for Hardtops use a barrel nut binding screw now, no more Z clips!
Thanks@@@BestopTeam
So this soft top just flips back and sits there without flopping around while someone is driving????
The weight of the top holds it down, I've never seen, heard or talked to anyone that said the top flipped forward by itself.
Mine is leaking horribly!! Over it
Does this kit come from the factory in a box? I ordered this for my two door nine months ago. Now that it's here I have changed my mind and decided that I don't need this top. The dealership won't take it off my order and I had to walk away. I'm confused and disappointed. Now I have to order a new vehicle and wait again.
you walked away from a new Bonco because of a 1k dollar option that you could've sold privately? thats foolish
Plus if you had already ordered it what was the dealer supposed to do….
I'll have to agree with Shawn lol. That was crazy but feelings reigns supreme!!!
The dealer sells this top for way more than bestop does, buying from bestop is the best bet. Also bestop offers installation, they come to your house and do it for $129. I had that service done for my jeep and bestop backs the work. NEVER TRUST THE DEALER