Hydro Assist - Limit Your Hydraulic Cylinder Easy and Free! (almost)
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- Internally limit the stroke of your hydro assist steering cylinder with a cutting board! You heard that right. Your wife might get mad when you take it, but she will get over it! I'm working on Hydro assist for the YJ with a 8" cylinder from Surplus Center, and I need to limit the stroke of the ram. This will work on any hydraulic cylinder! Thanks for watchin
➡Deburring tool I used: amzn.to/3Ga2dRy
➡Affordable Hole Saw Kit amzn.to/35EPWYJ
📺Ultimate DIY Hydro assist guide: • Ultimate Guide to Hydr...
🔥Partner Discounts🔥 Use my code: Flawedoffroad
To save 10% at the following companies!
--------------------------------------
⚡YESWELDER⚡ yeswelder.com/?ref=Flawedoffroad
🌟Yankum Ropes🌟 5% yankum.com/?afmc=Flawedoffroad
🔦Auxbeam🔦 12% Code: FLDORD
☕TRAIL RATED COFFEE☕ bit.ly/3IAF1xR
Great coffee that donates to Trail preservation!
--------------------------------------------------(affiliate links)--------------------------------------------
0:00 Opening
0:13 Spacer Selection & What you need to do
1:55 Measure for how much to limit your ram
2:44 Making the spacers
6:24 Disassemble Ram
9:59 Adding Ram Spacers & Re-Assembly
10:47 Conclusion
Follow me on Social media:
Instagram - / flawed_offroad
linktr.ee/Flawed_offroad
revkit.com/hell-on-wheels
#jeepyj #yj #hydroassist
Disclaimer:
Due to factors beyond the control of Flawed Offroad, I cannot guarantee against improper use or unauthorized modifications of this information. Flawed Offroad assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Flawed Offroad recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Flawed Offroad, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Flawed Offroad.
This video and description has affiliate link(s), which means that if you make a purchase after clicking one of the links, I’ll receive a small commission. Which helps me continue to make more content. - ยานยนต์และพาหนะ
📺Ultimate DIY Hydro assist guide: th-cam.com/video/9AK7vahBlxw/w-d-xo.html
Awesome 👏🏻
thanks for posting this - a tip - while you're working, get a wobble pop, empty it (don't waste it), and use the aluminum from the empty can to wrap the piston to make a slide to get the o-rings passed the lock there is just enough clearance and it makes the experience far less nervewracking.
I like the idea, no clue what a wobble pop is though lol
@@FlawedOffroad an adult beverage that comes in a can... in this case, the can is more important so you could use a soda can too
Just replace it with a nice teck or other hard wood cutting board. After researching the wood are much better.
You did her a favor.😁
Well she didnt want wood, so she got a 3 pack Amazon special instead. I didn’t even have to trudge through a store 😅
@@FlawedOffroad nice she won't miss it then. Play the dumb card. Hehe it's what I tell my wife.😂
Thank you! I was able to size down my 8" ram to 6" but i used a PVC 3/4 coupling as the spacers and not the cutting board🤙 and only had to drill out the center stop inside the coupling.
Glad it helped!
Let's address the elephant in the room; how bad was the ass-chewing from the wife?
Back to the serious side of things, just found your channel this morning and I'm glad I did. I'll be doing this to my F-250 in the not too distant future and you did a great job explaining it as well as your other video on setting the whole system up. When it happens, I'll make sure I give you credit in the video I make of it.
I hopped on Amazon and had a $5 replacement on the way before even telling her. I just got the look lol
It was actually my stepdaughter that threw a fit, I brought the carcass in the house and threw it back in the cupboard 😆
I know this is an old video but i often double stack holesaws to cut out "rings" you can thread a smaller holesaw inside a larger oner with certain arbors
Yeah it’s called an oops arbor and I actually have one and used it in a different video. Honestly I kind of blanked on using it when I made this one lol
Fuck yeah buddy, that's good ingenuity. 👍
It was quite the ah hah moment when I was trying to think of what I could use or what I had that was Nylon haha. I had to buy her a new one but it was like $7
Did he get cut by the unibit ?
Nope I never let it touch me, I tried putting it in my drill press vice but it was crushing it so I tried holding it and channel locks
Think the material is HDPE.
at the time I was thinking uhmw but couldn’t think of the real names of any of it😅