ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
Thank God for videos like this❤ and Thank you too.
讚讚爹斯實用😊
Is it okay if the base is a little longer than the seat itself, and thus, hangs off the seat some?
Make sure no more than 4 inches of the base is past the edge of the vehicle seat
Which is better to use between LATCH and Seat belt?
You should use whichever method gets the best install in the vehicle
So you don't lock the seatbelt before putting the shoulder belt into the lockoff on the base?
Correct, you pull the seatbelt through the lock off. You don't need to lock the seat belt.
Wish it had an outside indicator for when full
Is there facing front video?
The KeyFit 30 is a rear-facing only car seat.
How to remove the base from the car seat?? 😢 so i can install
There is an orange handle on the back by the canopy. Pull the handle and lift up the carrier.
When I i installed the base, the front (the part that's not against the seat if the car) still seems to move too much. Is that normal? If not, what's a better way to secure the front?
Yes, it is normal for the front to move. It is important that there is no less than one inch of movement at the back where the latches are attached.
Is it ok to use both latch and seatbelt methods?
You need to install the car seat with either the LATCH or vehicle seat belt, not both.
@@chiccousababyWhat's the reason for not using both?
@@treelicker It has not been tested that way
Thank God for videos like this❤ and Thank you too.
讚讚爹斯實用😊
Is it okay if the base is a little longer than the seat itself, and thus, hangs off the seat some?
Make sure no more than 4 inches of the base is past the edge of the vehicle seat
Which is better to use between LATCH and Seat belt?
You should use whichever method gets the best install in the vehicle
So you don't lock the seatbelt before putting the shoulder belt into the lockoff on the base?
Correct, you pull the seatbelt through the lock off. You don't need to lock the seat belt.
Wish it had an outside indicator for when full
Is there facing front video?
The KeyFit 30 is a rear-facing only car seat.
How to remove the base from the car seat?? 😢 so i can install
There is an orange handle on the back by the canopy. Pull the handle and lift up the carrier.
When I i installed the base, the front (the part that's not against the seat if the car) still seems to move too much. Is that normal? If not, what's a better way to secure the front?
Yes, it is normal for the front to move. It is important that there is no less than one inch of movement at the back where the latches are attached.
Is it ok to use both latch and seatbelt methods?
You need to install the car seat with either the LATCH or vehicle seat belt, not both.
@@chiccousababyWhat's the reason for not using both?
@@treelicker It has not been tested that way