Installing a Tankless Electric Water Heater - Rheem RTEX 240v 13kw in My House
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Installing a Tankless Electric Water Heater - Rheem RTEX 240v 13kw and removing my old gas tank heater. Massive space saver! Electrical work should be done by an electrician!
A few amazon links to helpful supplies:
Rheem RTEX-13 amzn.to/2KMzk3H
Sharkbite fittings amzn.to/2VQ7lXg
6 awg romex 2 wire amzn.to/2VQ7lXg
60 amp breaker amzn.to/2VQKECh
Flux and solder for tinning or seating copper pipe amzn.to/3f4FutZ
Butane torch amzn.to/2ydofG1
Get to the point councilor.
When he called the thermostat stupid I knew there wasn't any value here 😞
😂😂👍
@@catherineharris4746 😉
😂😂😂😂😂😂😂
Thank goodness I could skip ahead to 19:11, where the actual info is discussed.
If you want instant hot water get a 6 gallon or 10 gallon Rheem 120 Volt hot water tank and connect it to a recirculating pump after the on demand water heater this way you will have instant hot water, and if you have issues with the on demand or the power goes out you can still power your whole house with a 3500 Watt /120 volt generator, or a 120 volt Solar System. Ive put a meter on the Retex 13 & it pulls 54 amps.
I need a 8 GPM tankless unit with all the showering and laundry that is going in my house. I looked at one sold by Lowe’s and for the electrical it requires 3 double pole breakers 50 amp with 3 dedicated cables all 6 gauge copper. Also the house needs 300 amp service from the electrical company and I have only 200amp on my panel right now. Sad moment.
George Carlin once said, "Hot water heater? Hot water doesn't need heating."
As a former plumber I can attest to this. It’s incredibly annoying lol
I love George Carlin - funny and makes great points!
Wiring instructions for inside water heater starts at 19:00
Thank You!💖👍👍👍
Yeah but it's garbage in very much incomplete.
This has been the most helpful video I’ve seen on this. Thank you!!
Very easy to install, thanks! For those complaining about diagrams, just look at the picture and try not to be an electrician, because you are not if you are asking for them!
False
Thanks for the vid, I'm going to get the Rtex 11, I know everybody has an opinion, but you should protect that 6 gauge wire coming in, not sure code and if it can be in conduit, but anyway. Appreciate the vid! Also, not sure why you are stating your rating wrong, your model should get over 3GPM.
8kW Model Flow Rate: up to 1.95 GPM
11kW Model Flow Rate: up to 2.68 GPM
13kW Model Flow Rate: up to 3.17 GPM
Also one good thing about tankless is there is no worry about pressure building up that can drain out via pressure relief valve.
Would have been nice if u explained how you hooked up the common and hot wires to the same breaker ?
Its 2 am, why am I watching? Gotta Git R done. Love the cat. You are a sandbagger, you know what you are doing. NIce job, hope the small unit works in the Phoenix furnace!
Great video. Thank you. There aren't many videos showing how to install these thankless units. Very entertaining 👍
Too bad he did everything wrong lol
Thank you for taking the time to make this video. I’m gonna use cpvc. Hate messing with that copper
That measly carbon filter wont stop your hard water. You need a water softener. Your water is similar to Floridas. Best set up for your system is line in to house-> then whole
Home filter-> then water softener-> then hot water heater. Otherwise you will get scale build up
I believe you should have added a pressure release valve and two clean out valves to descale your unit every year or two. That will prolong the life of the unit. Just my two cents
I agree fellow plumbing pro
I did and I talked about it in the video.
Consider insulating your distant hot and cold water lines to solve the temperature problems. Also, I recommend R-30 batts in your attic which I installed in my central Florida townhouse in 1991 so that now my average electric bill is ~$43/month. My unit is comfortable without A/C downstairs. I use ceiling fans and open windows at night. In your case consider a swamp cooler instead of A/C.
My water lines are insulated. Here in Phoenix we have to do it so we don't get scalding hot water in the summer from the cool side. It only helps a little though.
I saw your attic. You definitely need R-30 batts. Construction people frequently have a huge surplus which they stack in their attacs so ask any construct friend before buying.
@@Eusebeia7 Yeah. last year I sucked all of the insulation out and did blown in and batts over the areas that have plumbing and electrical. It's definitely getting another layer just haven't gotten that far yet.
Great video. Straight to the point and absolutely you save a lot money. Mau God bless you and your house.
Good Job brother.
Straight to the point where? 12 minutes into the video?
Straight to the point??? What video did you watch?
As a plumber I can tell you have hard water you need to install a filter in front of that water heater line or you're going to end up with that same gurgling in your tiny little heat exchanger which will officially plug it up trust me from experience
Hey in the box the plastic bag there is an template for mounting the unit
Never seen a 120 V electric water heater in the US, it's very rare. Neutral vs Hot in the USA only applies when 120 V, since your using double pole circuit breaker there is your answer.
WATER HEATERS. You don't heat hot water.
Bet your hands were itchy after all that insulation! Thanks for the video - much more involved than I'll have to do but thanks no less!
Hey Darvin nice video.....it be really cool if you did a video on "how to tap into circuit breaker" video from like (Ex.kitchen or garage) where you would need an extra power.
Glad you got rid of hot water heater rather than your beautiful kitties :)
I think if you are using black and white wires for your 240V connection, you are supposed to put a couple wraps of black tape around the end of the white wire to clue future repairmen that it is not a neutral conductor. Also, I have seen sharkbite connectors pop off, particularly when applying pressure to a line that had no pressure. Maybe they are OK if constantly under pressure.
When the future electrician turns the breaker off they will know it’s not a neutral with a 2 pole breaker
You used to much flux and solder but you got it done
I got this water heater, but I have 6 gauge wire with red, black, white & ground. I only see a spot for ground black and red. what do I do with the white?
Lmao
Just installed the same one for my mother. Didn't realize it needed 60 freakn amps😭. Now I have to install a sub panel for her
Can it be plugged in?
@@teamnumbskull2846 nope. Have to have two thirty amp breakers
It’s really making any savings. I want to install one. Wait for answer thanks
If you were to take exactly 10 minute showers then yes it would be now you can take 40 minute showers.... lol
Obviously your down south somewhere because that pipe with the filter wouldn’t last one night in the winter here in the northeast.
I think it would have been easier to put it on the wall right where you took out the old water heater, water already there you would have just needed to add our power.
Appreciate the info but why are we having to watch you clean your house now when trying to learn how to install these? Also yea, I noticed "to forward think" or rather to consider the future and probabilities and its complexities aren't your strong suit, it was clear after I spent like what I felt like was 5 minutes watching you clean your house waiting...
Thinking about buying one of these, have you had any issues in this time?
Dude your breaker panel has a bit of rust in there. That is no bueno. You are getting some moisture from somewhere. That shit needs to be sealed up. You are going to get electrocuted touching that thing or eventually get some arcing and cause a fire. That should be top of your priority list my friend.
Yeah that box is 40+ years old. No actual leaks. just looks rough from being outside. The main is being moved to another wall so it will all be replaced.
Just bought a rheem rtex-13. I'm not getting any hot water. Brand new install. No errors, nothing. Any suggestions?
Im curious why it wouldnt be code to run 6/3 wire on a 220 application especially with a 60 amp breaker? That being said I noticed the internal of the water heater only accepted 1 hot instead of two as well. That confuses an idiot such as myself. Lol. Nice install though
You should install a fire sprinkler in your utility room it’s honestly not that hard and pretty affordable you just buy one online and hook it up with some copper pipe and fire sprinklers are not that expensive they run around like 10 bucks on Amazon
You can save more room with an LG All In One Washer/Dryer. 120volt not 240.
And not the stackable unit.
Its good that you admitted you mistake ,other plumbers/electrician will act like nothing happen
Very good video, very helpful, thanks
Curious to know after 2 years how this electric tankless is holding up
so far so good. Its now my ex's house but I showed her how to flush it last week.
Making it flushable was a very good idea. I have the same unit. I'm on my second one because the first one failed. The heat exchanger sprung a leak and Rheem didn't honor the warranty. I'm now troubleshooting the second one because the temperature shoots way high while I'm taking a shower.
Way to much solder bud. It doesn’t take as much solder as you would think. I would check on those shark bites every year 😬
Thank you for this video. This will be one of my bigger upgrades as I don't like relying on gas for hot water as it's hazardous. Did you have to get a permit and schedule an inspection afterwards?
Show how connected the wires?
Truly thankful for this video we are about to buy one to install and this video helped us so much! Thank you!
hope u can find someone to service it. I found it very hard.
Thanks for the video. I have a question for you: Which one is better in cost (upfront, installation and running )? 1. conventional electric tank heating system 2. One big tankless electric water heating system or 3. Mini-Tank Point-of-Use Electric Water Heaters at multiple points (2 in bathrooms and one in kitchen for dishwasher and sink).
Mini tank systems are meant for Low use. Like a half bath or sink to wash your hands. They don't have the volume output for high flow like showers and bathtubs.You could do 8kw tankless at the point source like a half bath or kitchen but you need at least an 11kw for a shower. .
Tankless electric, you will have issue in within 2 to 3 years and when you take a shower and lower the water to keep from running, it taks a while to heat up again, in the winter it gets inconvenient,had two of them,bad experience,going back to the tank.
Im thinking my inline carbon filter messed up my flow switch, so Im going back to the white filters.
I put the 18kw in my house and we are on a well pump and it does not work it throws a E5 code which means the flow is to high but we have horrible pressure because of the well pump so I don't see how anyone can use a 13kw for there home..
Maybe your well pressure is set too high.
Ty! Nice and easy to understand
Hi, Good Video But If You Can Make Other Video ???
How You Connected Wires And Show Terminals, Breaker’s
And Electric Main Box, How You Grounded Too ???
Thanks For The Vídeo.
Use ur pipe cutters next time like a pipe vice! Just squeeze gently!
After watching several tankless gas water heater now i debating on a electric tankless 🤦🏻♂️ can someone help me choose the right one. Installing is not an issue for either one
mine stopper turning on after 2 years to this date. the led comes on but only when you turn the knob. When I turn on when the water. My guess is the flow meter but I don't know how to check it.
I know this video is 2 years old but I just had this installed into a “tiny” home and for some reason it’s not working properly.
The water never gets to 140F, it only stays warm for a min before going cold and then warm again, and then the bath tub faucet does not get warm at all.(the valve is all the way up) any advice? I have the exact same one as you.
It sounds like a bad flow sensor or there is too much flow. You may need to install a restriction to slow the flow down.
This leaves all the details specific to the Rheem 13 out and just tells how to run things in his house.
That shot would freeze and bust in these parts about mid November or before lol
In our pole building (shop) , all that I plan is to use PEC, but no shark bites, just clamps. I am bringing water in from meter, but no copper in shop. In the past (40yrs ago) I always used plastic pipe, but am being told to use PEC now. Is this OK and how do I hook this up?
You could totally do it. Just get Pecs to copper adapters The pipes coming out of water heater need to be copper to seal correctly. Just a few inches of copper tubing on the inlet and outlet then a pec to copper adapter.
Nice!👏👏👏👍👍👍
Nice video
Excellent!
I was told that a tanks water heater can not be install on a older home with aluminum wire.
I would run new wiring if you're planning on it.
My question is do you live in America? How you get it to work. I don't know enough yet but US outlets are obviously only 120v. Even with a 60-100 amp breaker how do you get 240v to it or do they make 120v models?
Yes in the US and to get 240v takes 2 breakers or 1 double breaker.
Your unit has the black load line "L" installed on the right and the white neutral line "N" installed on the left. On the interior housing of my unit it is stamped exactly the opposite in that the "L" is on the left and "N" on the right. How is yours's stamped?
It's a 240 voltage water heater, no such a thing as Neutral vs Line.
How’s this holding up?
What’s the difference between the RTEX 11 and 13.
I have a 1 br town house
With 1 1/2 bathroom only one shower
I
Was told to use the 11 is that true ?
Either one will work. It all depends on the distance from your water heater to the tub. More than 16ft of pipe then go with 13kw. If it's less then get an 11.
Does it work better
How are you going to flush it out every year?
Notice the bibs with the levers I put on it in the beginning. Hook up hoses to that.
What’s the size of your home panel 200amp? Did you have to have the electric company upgrade the feeder line?
Just 125amp service. No upgrades. This heater is pretty efficient.
Why did you switch to a small electric tankless instead of gas?
Gas in that house was very expensive. switching to electric saved $40 a month.
@@davinsrandom3142 Someone else recently mentioned saving money by switching back to electric. So much for the "electricity is the least efficient way to generate heat" argument I guess. 🤣
That breaker box is not code gross and exposed romex.
WHAT IS A HOT WATER HEATER
His that thing working after two years ??
Yes its still working.
SharkBites in the attic, have fun 🤣 Insurance company may one day use this video against you.
@@Sheeple-Wake-Up The opposite of both. Insurance is a scam and Roper is a perv. I still stick to my original statement.
Shark bites are excellent products they would not have lasted this long if they actually didn't work people who don't know how to install them properly screw them up
I had one of these installed about 6 months ago, but now I'm getting lukewarm water instead of hot water what could be the problem?
If you have hard water then you may need to flush it with vinegar.
Shark bites😬!! 🤨 those are not what you want for long term, but if you leave em, I’d suggest water bug/ leak detectors to let you know when they start leaking.
Water heater. A hot water heater would be redundant.
I have question. I installed one of this at home but when ever I use hot water my lights start to blink why is that?
Are your lights a dimmer switch?
You BETTER get an electrician out and inspect what you did.
Depends on your total service amps for the whole house. You are not to exceed 80% of your breaker. So if you only have a 100 or 150 amp service you might be exceeding it.
What size is the service to your house -100amp did any breakers trip when the dryer stove and hot water unit we’re running
125 amp and no breakers tripped. This is on its own breaker.
13kW needs 40A breakers. 8 gage wire would've been fine
@@artterzian6233 13KW @ 240 V = 54.16 amps ... definitely 60A breaker and 6 gauge wire .
I've been researching for an 11kw unit ... and it still needs larger than 40A & 8 guage wire.
Albeit I might could get by having to reset the 40A breaker once in awhile for my unit.
But the video poster couldn't .
However breakers ran close to their limit regularly become soft , and I would likely have to replace it every so often.
Hey man, where are you at in Phoenix? I’m in Phoenix as well, would love to connect with you to do some projects
Mid town ish
Did you ever figure out how the dial keeps moving on its own?
Not really sure but my theory is resistance in the old element.
Help me install my please. I’m also in Phoenix area.
This was an exact replacement for the old one that lasted about 10 years. th-cam.com/users/postUgkx7yWIKcrbA9KMHkGSfcgxW2lsjHT6B8Sh The top of my mitigation tube by my roofline was just a 90 elbow which allowed too much debris to fall down into the fan, eventually ruining it. Without this issue, I bet it would have kept running another 10 years. When I replaced this fan, I added an extra elbow joint so the top tube now it does a 180, which should solve that problem. The radon guys around here wanted to charge me a $300 diagnostic fee, then parts/labor (probably close to $600 total). I installed this all by myself in about an hour for the cost of the fan; it would probably be even easier/faster with two people. FYI the manufacturer's warranty greatly differs depending on whether you install it yourself (1 yr warranty) or have a licensed installer do it (10 yrs).
Hey, what is the water temp coming out of the ground where you live? I'm in WV getting that one, or the 18KW
He said at the beginning of the video. 60F in the coldest part of the year.
Your video was informative but people don't want to watch 2 hours of work in 23 mins or even 5 mins for that matter. Change that and you'll have way more subscribers
Heating elemet burned out on my friends. And it only 6 months old!!
How much power is your AC using
ac or water heater?
Why is does the standby indicator fail to glow at all?
Couldn't tell ya. It only lights up when water is moving through it.
You didn’t show how you actually did the connections for electric and water. You showed after it was already done
Its only 3 wires, Line - Black, Neutral - White, and ground. Same for the breaker
How many sq feet is ur home u installed it in looking
1400 but just one bathroom
Why on Earth would you ditch a gas water heater for an electric?
You need a softener
This was an excellent video. As with so many viewers, Mr Davin also speaks in practical terms and offers routine terminology with insightful opinion.
Just one question regarding the Shark Bite copper connectors. In the first introduction within this video, Mr Davin identified the Shark Bite product as a ‘snatcher’, as in copper snatcher. In later describing the product, Mr Davin used the standard description of Shark Bite copper ‘connector’.
I am comparing these terms not for any technical or copyright statement, but rather to settle a mild friendly household argument as to the term ‘snatcher’ that was first used in this video. Yes, this is petty, but for two viewers it has presented the usual household argument regarding who needs a hearing aid more🙂Mr. Davin’s responding statement made here as to what he actually said would be gratefully appreciated, as we have played the first description 7 times. Both of us continue to ‘hear’ distinctly different 2nd words. Does your first description use the word “snatcher” or ‘connector’? The favor of Mr. Davin’s reply and clarity will be eagerly looked forward to.
And Bravo! For your practical and useful presentation.
What terminal did you use to connect your wires to the water heater?
Thats a big cat
Won't you pay more using electricity instead of gas to heat your water? Then again if it's only for warm water not for heating your house I guess it doesn't matter that much.
Compared to gas it will cost 10$ more a month but mainly because my wifes showers are 5 min longer
If you have solar panels, u could possibly eliminate the gas bill all together and even electric.
Don’t use shark bite fittings on a nice heater like that 😞
Whatever...until you got data that shark bites are a problem then it's just old farts hating on new tech. SB and pex is proven time and time again while I got 20 year old copper joints failing all over my home.
@@cowlumbus Anyone who uses shark bites or has any experience in the maintenance field knows that an O-ring seal isn't going to hold especially not like copper. No one is hating on pex. Everyone uses pex but not SBs.
Neat Job ... excellent 😁
hot water heater, hummm why would you heat hot water?