Mk5 Golf GTI intercooler upgrade

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 พ.ย. 2024

ความคิดเห็น • 35

  • @TheMartman1971
    @TheMartman1971 3 หลายเดือนก่อน

    Fitting one of these over the weekend to my Tfsi converted caddy after stripping my mk5 Gti as a donor 😂
    Handy video to watch

  • @dysh17
    @dysh17 3 หลายเดือนก่อน

    enjoyed this vid as former mk4 and now mk7.5 owner. looking forward to following along. cheers

    • @aguycalledjoe7802
      @aguycalledjoe7802  3 หลายเดือนก่อน

      Thank you very much, plenty of content on this car. As you will already know, the to do list on these cars are never ending🤣.

  • @mich9170
    @mich9170 3 หลายเดือนก่อน +1

    Good video, as always well explained, excellent work! 👏🏻👏🏻👏🏻

  • @flight89swan
    @flight89swan 3 หลายเดือนก่อน +1

    Good progress, but whilst the front end was off you should have just changed the radiator at the same time. Will save lots of time in be long run. 😊

    • @aguycalledjoe7802
      @aguycalledjoe7802  3 หลายเดือนก่อน

      @flight89swan you are so right, I so wish I had thought about changing the radiator & the ac condenser whilst I was in there. I have since replaced the ac condenser.

  • @TinoR626
    @TinoR626 3 หลายเดือนก่อน +2

    I'm in the process of looking for an s3 intercooler as it turns out the cfs aluminum radiator will not fit the APR or IE upgraded intercooler. I haven't tried a CTS one as I'm not willing to spend 700 just to see. And the cheap ebay ic while massive the it also won't fit, side note those are a great bang for the buck.
    Not gonna lie having my own a/c machine makes this a alot easier and struggling with the a/c condencer is a lot harder then it looks. I did 2 before I got my machine and they made me hate it.

    • @aguycalledjoe7802
      @aguycalledjoe7802  3 หลายเดือนก่อน

      S3 intercoolers are easily accessible. I just wanted a simple fit & not have to cut things. 700 for an intercooler is a tonne of doe for me at this point but I bet it is a awesome bit of kit

    • @TinoR626
      @TinoR626 3 หลายเดือนก่อน

      @aguycalledjoe7802 over here the s3 ic is a little hard to find. The cts kit also comes with pipes but I have those already. I might just have to run the stock radiator and then if I come across an s3 later then see if it fits. CFS also didn't have an answer when I called and asked what aftermarket IC it fits. As they said if a stock fits on it will fit but I know that to not be true.

  • @ThePerson444
    @ThePerson444 3 หลายเดือนก่อน

    Those damn clip on pipes! I've given up on replacing seals on the charge pipes. Always leak. I've looked at a seller that makes a bayonet so i can clamp on silicone hoses but it seems overkill for a stock gti.

    • @aguycalledjoe7802
      @aguycalledjoe7802  3 หลายเดือนก่อน

      I have noticed quite a lot of people commenting & complaining about these seals. They are not the best idea by VW.

  • @DroopyPiles
    @DroopyPiles 3 หลายเดือนก่อน +1

    Love your vids, are you looking to a modest 300hp build?

    • @aguycalledjoe7802
      @aguycalledjoe7802  3 หลายเดือนก่อน

      Thank you mate. The car is already at 320 so we will see what it produces once I have got it ready

    • @DroopyPiles
      @DroopyPiles 3 หลายเดือนก่อน

      @@aguycalledjoe7802 oh damn nice!!

  • @muhammadkhan3557
    @muhammadkhan3557 2 หลายเดือนก่อน +1

    fit a k04 and some spacers

    • @aguycalledjoe7802
      @aguycalledjoe7802  2 หลายเดือนก่อน +1

      @Muhammadkhan3557 it is already K04. I had Eibach spacers on the car but it actually drives a lot better without them.

  • @philipnewnahm6659
    @philipnewnahm6659 หลายเดือนก่อน

    How much did all the parts cost ya ?

    • @aguycalledjoe7802
      @aguycalledjoe7802  หลายเดือนก่อน +1

      I payed £160 for the intercooler from eBay

  • @reeceishere2586
    @reeceishere2586 3 หลายเดือนก่อน

    Did the s3 hoses fit directly onto the gti?

    • @aguycalledjoe7802
      @aguycalledjoe7802  3 หลายเดือนก่อน

      Yes it was a straight fit on my GTI👍🏿.

  • @Bryzaah
    @Bryzaah 3 หลายเดือนก่อน

    @8:10 where did you get the specification?

    • @aguycalledjoe7802
      @aguycalledjoe7802  3 หลายเดือนก่อน

      Yes I got the information from my local VW dealership.

  • @christopherbell7561
    @christopherbell7561 3 หลายเดือนก่อน +1

    You didn't have to disconnect the rad to do this job.

    • @aguycalledjoe7802
      @aguycalledjoe7802  3 หลายเดือนก่อน +2

      You are probably right but I have very limited knowledge & can only attempt things the way you see me doing it. I am slowly learning🙂👍🏿.

    • @christopherbell7561
      @christopherbell7561 3 หลายเดือนก่อน +2

      @@aguycalledjoe7802 no jip just passing on knowledge

    • @aguycalledjoe7802
      @aguycalledjoe7802  3 หลายเดือนก่อน +1

      @christopherbell7561 💯appreciate the knowledge, keep it coming🙂👍🏿

  • @derekporter66
    @derekporter66 3 หลายเดือนก่อน +1

    Future plans ?

    • @aguycalledjoe7802
      @aguycalledjoe7802  3 หลายเดือนก่อน +1

      Absolutely loads but just not enough time. Keep👀

  • @NFGD1
    @NFGD1 3 หลายเดือนก่อน

    It’s literally the same intercooler as ed30

    • @aguycalledjoe7802
      @aguycalledjoe7802  3 หลายเดือนก่อน +1

      The Audi S3 intercooler has better cooling capability over the ED30 intercooler👍🏿

  • @rnldmanuel88
    @rnldmanuel88 2 หลายเดือนก่อน +1

    Do you know whats the part number of that intercooler.

    • @aguycalledjoe7802
      @aguycalledjoe7802  2 หลายเดือนก่อน +1

      No sorry I do not know the part number, I bought it second hand from eBay. It is just an Audi S3 8P aluminium Intercooler. Hope this helps👍🏿.

    • @rnldmanuel88
      @rnldmanuel88 2 หลายเดือนก่อน +1

      @@aguycalledjoe7802 I've got a BWA 2.0t Jetta planning to go stage 2 soon wanna upgrade the intercooler. I guess the 6r one should work aswell

    • @aguycalledjoe7802
      @aguycalledjoe7802  2 หลายเดือนก่อน

      Yes i would imagine it is very simular, if not the same