CHEAP Amazon Taillight from MOVOTOR | LED Turn Signals For Harley Dyna & Sportster

MOVOTOR Taillight
amzn.to/35btP8t
amzn.to/3dFpzlg
K&S Technologies 30-0400
www.summitraci...
Custom Dynamics Baseplate and Circuit Board
amzn.to/2Hdz8fD
amzn.to/3m4i6zw
Custom Dynamics License Plate Mount
amzn.to/2Hcm7Tq
Amazon Carb
amzn.to/33h2XXr

[@feverdream5184]

Thanks for making this video 🫡
If you still have your original signals intact you can use the plugs to do this and you don’t have to buy the ones he used.
I used the stock connectors and spliced the whole thing in.
Used the oem lightbulb 3 wire plug, cut and spliced RBW w corresponding wires to get power and signal (my light didn’t come with a plug wired up)
Used oem signal plugs, cut wires and spliced blue/purple for Left and yellow/purple for Right.
I left the black wires bc i couldn’t de-pin them for the life of me but i cut them back far enough to be clear of the splice and they went under the secondary layer of heat shrink.
Everything was heat shrunk first at splices and again with a segment of black heat shrink over the top.
Works great so far 🤙🏼 definitely bright enough at night.

[@twinsmotogarage1866]

@@feverdream5184 I have bought this taillight a few times since making this video and they now come with the turn signal connectors out of the box.

[@alexandernvelez6756]

I just got mine but both my yellows are always on as well.

[@KevDoesStuff]

is this bright enough in the day time? the custom dynamics is pretty expensive but very bright.

[@nicolaswilliams9060]

Where did you get those pig tails at? That light didn’t come with them??

[@SantaPlaysPickleball]

Did you need to swap to an LED flasher relay?

[@rekondaddy8109]

Do you know what the extra black wire is for. Could you connect side factory indicators with those after market wires. So you wouldn't have to pigtail them?

[@johncolburn4353]

That's what they're for.

[@OSOFLHP]

Black would be ground,

[@OSOFLHP]

Load equalizers are needed to stop hyper flash

[@tylerhubbell6410]

I changed out the stock rear running lights/turn signals lights to the Arlen Ness LED ones and never experienced the hyper flash.My bike is the 2018 iron 1200 though with the chopped fender so not sure if it's only an issue on the older Harley's.

[@Rinnies_xX]

I have a 94 xlh 883 sportster. Mine don’t look like that when I take my lens off. Can anyone help me?

[@bradleydaignault5007]

yeah i bought this before checking and cant use it

[@Supermankev2001]

I would look for a gasket to keep water out of the light housing.

[@WhoGoneStopMe925]

It comes with one

[@rafaelmarquez4490]

can you use the stock plate or you have to use a aftermarket one?

[@nicolaswilliams9060]

What pig tail connectors did that light come with?

[@nextgenbarr8913]

Bought this same light it now comes with the connectors to plug n play

[@twinsmotogarage1866]

Heck yeah! I just bought another and it came with the connecter as well.

[@josephschroeder8240]

what are the connectors you used on the yellow and blue wires

[@twinsmotogarage1866]

The same light now comes with the connectors already installed. No need to purchase the connectors separately now.

[@dakotawallace1156]

No running light on mine same exact set up too

[@twinsmotogarage1866]

Running light stopped working on mine. I bought another, we’ll see how that goes.

[@dakotawallace1156]

Seems Mines a dud. Oh well

[@livemorededicated3881]

Hey man I was wondering if when you are breaking and using flashing the same time if the brake light gett engage

[@OSOFLHP]

I have a tail light like that brake is red in the center turns are amber on left and right

[@wadekeys6285]

What kind of plug connectors are those?!

[@twinsmotogarage1866]

Not sure the name. I’ve ordered the same light and recently it has come with the connectors ready to go. Harley sells the connectors also

[@assassinator77]

FYI, when you turn the key off, it turns off the turn signals too. 🤯🙄

[@momule55]

You took the time to get rid of the extra wire but then you decided not to heat shrink your connections, which you were going to do from the start? Whats up with that?

[@twinsmotogarage1866]

I was probably supposed to heat shrink that clear piece but i wasn’t entirely sure. I mention this in the video....Main reason I didn’t was cause the clear piece didn’t completely cover the connections which I didn’t like. I wanted to be able to easily disconnect that connection and put a longer piece of heat shrink over the entire connection at a later time.

[@momule55]

@@twinsmotogarage1866 Gotcha. That makes sense then.

[@Iysmnyd]

Doesn’t come with the proper screws to mount the light….😊

[@lovmyevox]

Nice man have u found any seats for it yet ?

[@twinsmotogarage1866]

Ramiro Estrada Not yet. Some companies make new seats for them but the used market for 04 & 05 seats is pretty dry.