Chrysler PT Cruiser Modular Clutch Replacement - 2001 thru 2006 5 Speed Manual (Non-Turbo)
ฝัง
- เผยแพร่เมื่อ 18 พ.ค. 2024
- Hello TH-cam,
Today, we are changing the modular clutch assembly on our 2003 Chrysler PT Cruiser. We take you through step by step on how to remove the transmission and replace the clutch assembly, along with the axles seals. This can be done in a few hours in your driveway with basic tools.
Parts:
Modular Clutch Kit
www.oreillyauto.com/detail/c/...
OR
www.rockauto.com/en/moreinfo....
Axle Seals
www.oreillyauto.com/detail/c/...
OR
www.rockauto.com/en/moreinfo....
VEHICLE FITMENT
2001-2006 Chrysler PT Cruiser
Tools Needed:
8mm Socket
1/4” Ratchet
3/8” Ratchet
6” extension
10mm socket
13mm Socket
15mm Socket
18mm Socket
21mm Socket
Impact Gun
½” 3” extension
½” Torque wrench
Cheers!
Follow Bradleys' Garage:
Website )) -coming soon
Instagram / bradleygarage
If you liked the video, remember to give it a "thumbs up" and consider subscribing.
Thanks again for hanging out!
#ptcruiser #clutch #transmission
Music by www.bensound.com/free-music-f...
License code: C3TMYONJN13B0F5H
Disclaimer:
Due to factors beyond the control of BradleysGarage, we cannot guarantee against improper use or unauthorized modifications of this information. BradleysGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BradleysGarage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BradleysGarage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BradleysGarage. - ยานยนต์และพาหนะ
I’ve been looking for so long a a well detailed video to replace the clutch for my pt cruiser and you literally made the best video ever thank you so much ❤
Thanks for the kind words, glad you enjoyed the video. Good luck on your PT Cruiser repair, let us know how it goes.
Cheers!
Another great DIY!
Thanks for the kind words, appreciate the feedback.
Cheers!
عمل رائع يا صديقي
شكرا على الكلمات الطيبة، سعيد لأنك استمتعت بالفيديو.
هتافات!
Muy bien excelente 👍
Gracias por las amables palabras, me alegra que hayas disfrutado el vídeo.
¡Salud!
I replaced my clutch in my 2001 PT Cruiser this weekend. I got it back together and tried to start it, it made a grinding noise, I turned it off and now it won't start at all. Any ideas?
Sorry to hear that David, it sounds like the starter may not be fully seated into the transmission housing. If you are confident the clutch pack and throw-out bearing were installed correctly, then the misaligned starter is all that we can think of.
Get the front wheels off the ground and check the transmission movement. Does everything rotate freely with the transmission in neutral? How about if you put it in gear, does everything still rotate without any funny sounds?
Let us know, Cheers!
هل ناقل الحركة اوتماتيك ام عادي
هذا هو ناقل حركة يدوي 5 سرعات. إنها تستخدم مجموعة قابض معيارية غريبة ولوحة ضغط. من عام 2007 إلى عام 2011، عادوا إلى النمط العادي الذي يحتوي على قابض فردي ولوحة ضغط.
شكرا مرة أخرى على التسكع.
هتافات!
Ive just started watching you and really enjoy your videos, I just wanted to give you some feedback about this one, its too specific of a video for me to enjoy, i feel you are limiting your audience to diy clutch changers on this specific vehicle.
ill be back for your fault finding and maint videos still
Thanks for the feedback Dale, we prefer working on projects and that's what we want to focus on. Sometimes however, we have to tackle these one off repairs and since we are performing the repair, we go ahead and create the video just in case someone out there needs the help.
We have a few examples on our channel where we thought they would just help a few people and have ended up getting thousands of views.
th-cam.com/video/qwlcCnwFT0o/w-d-xo.html
and
th-cam.com/video/6H28pxrfs2c/w-d-xo.html
Thanks again for the support, we will keep producing content that we hope you will enjoy.
Cheers!
@@BradleysGarage wiked, really happy for you guys and really hope you take off on youtube. all the best
@@daleperkins1771 Thanks again for hanging out on the channel. We love getting feedback from our Subscribers. Appreciate the kind words, Cheers!