ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
Can I use a 08 2.4 from a caliber to my 2014 Journey? Help please I see that the trans and motor mount it’s different from the Sebring
Yes u can
Any tips on separating the engine and transmission. I have a 1/2 inch gap between the two, but can't get it any further
Bigger pry bar
Will a 2015 200 2.4 fit a 2015 patriot 2.4 if you know.
Yes
How much the price
Do you know if a 2011 Chrysler 200 2.4 L fits a 2014 Dodge Journey 2.4 also lmk thanks
Yes most definitely
Hello bro where do ground run to & from on that 2013 journey motor
On the side engine mount to engine
@@cportmikesautomotiverepair1355 ok bro i have that one hard line to ground
Or its one on the transmission to the body frame on the car
@@cportmikesautomotiverepair1355 thank you it has a loophole that boat to the transmission housing right
Yes correct
On way to LKQ to get 1 this morning.....what tools to bring? HFD
You going to get that engine
@@cportmikesautomotiverepair1355 yupp ...08 Avenger
How much was the new motor?
Like 1300
Was the harness a pain to remove? Thinking about replacing mine per it getting old and brittle. Also hates this winter and has some rub points.
No its easy to remove you will get it
Thank you ..just my mechanic said if i removed from the top will charge me less
Hello ..a just 1 question ...do you remove the engine drom the top or bottom?
Top
Does this require any reprogramming after swapping?
Nope not at all runs very fine
@@cportmikesautomotiverepair1355 awesome, thanks brother. That was a crazy fast reply. I appreciate ya!
Replace the gasket it is way cheaper than getting a used or new engine
That was the customer choice and plus head gasket will take longer plus you will have to take it to the Machine Shop so why not put a good running motor in it
Can I use a 08 2.4 from a caliber to my 2014 Journey? Help please I see that the trans and motor mount it’s different from the Sebring
Yes u can
Any tips on separating the engine and transmission. I have a 1/2 inch gap between the two, but can't get it any further
Bigger pry bar
Will a 2015 200 2.4 fit a 2015 patriot 2.4 if you know.
Yes
How much the price
Do you know if a 2011 Chrysler 200 2.4 L fits a 2014 Dodge Journey 2.4 also lmk thanks
Yes most definitely
Hello bro where do ground run to & from on that 2013 journey motor
On the side engine mount to engine
@@cportmikesautomotiverepair1355 ok bro i have that one hard line to ground
Or its one on the transmission to the body frame on the car
@@cportmikesautomotiverepair1355 thank you it has a loophole that boat to the transmission housing right
Yes correct
On way to LKQ to get 1 this morning.....what tools to bring? HFD
You going to get that engine
@@cportmikesautomotiverepair1355 yupp ...08 Avenger
How much was the new motor?
Like 1300
Was the harness a pain to remove? Thinking about replacing mine per it getting old and brittle. Also hates this winter and has some rub points.
No its easy to remove you will get it
Thank you ..just my mechanic said if i removed from the top will charge me less
Hello ..a just 1 question ...do you remove the engine drom the top or bottom?
Top
Does this require any reprogramming after swapping?
Nope not at all runs very fine
@@cportmikesautomotiverepair1355 awesome, thanks brother. That was a crazy fast reply. I appreciate ya!
Replace the gasket it is way cheaper than getting a used or new engine
That was the customer choice and plus head gasket will take longer plus you will have to take it to the Machine Shop so why not put a good running motor in it