Correct Way To Flush An Outboard Yamaha & Mercury Engine
ฝัง
- เผยแพร่เมื่อ 27 พ.ย. 2018
- Please be sure to like and subscribe to my channel to stay informed and get the latest videos. Instructions are at the bottom.
You can email me at captdrewcavanaugh@gmail.com or my website is listed below for more info.
The video description is listed below.
____________________________________
Yamaha - amzn.to/4cZTjqQ
Yamaha Trim Switch - amzn.to/4bTbihk
Yamaha Trim Fluid - amzn.to/3zP2Q5D
Yamaha Ring Free - amzn.to/3Lz1Oxf
Yamaha Mini Water Fuel Separator - amzn.to/3WvgX99
Yamaha Water Fuel Separator - amzn.to/3YbaYr7
Yamaha Fuel Filter - amzn.to/4bSKnCD
Yamaha Oil Filter - amzn.to/4faSkWj
Yamaha Oil - amzn.to/3WqqXjP
Yamaha Lower Unit Fluid - amzn.to/3WeMkDg
Yamaha Paint - amzn.to/3LR15rv
Water Pump - amzn.to/3WtesE2
Thermostats - amzn.to/3YcqMtU
Spark Plugs - amzn.to/4da1GQo
Anodes - amzn.to/4d4bDyO
Sta-Bil - amzn.to/46bBrH2
West Marine - amzn.to/3M25Bn7
Garmin - amzn.to/3zKkebw
Batteries - amzn.to/46dFW3S
Marine Odyssey Battery - amzn.to/3A9nBJb
On Board Battery Charger - amzn.to/3Wju9fV
Lithium Marine Battery - amzn.to/3A2ME0M
Bilge Pumps - amzn.to/4c56A0a
Transom Saver - amzn.to/3zT5LKr
________________________________________
Boat and Tackle Care:
Rem Oil For Reels and Engine - amzn.to/3LxOTvA
H&H CB12 Corrosion Block - amzn.to/3Lv1Jux
303 Protection - amzn.to/4dj06ff
QD Electronic Cleaner - amzn.to/4dbe42Q
Boat Bling - amzn.to/4d5C6w0
Star Brite Deck Cleaner - amzn.to/4cPo41G
GetterBack Underwater Rod Recovery System - amzn.to/3WcDhCY
Damp Rid - amzn.to/46vnhAL
Sta-Bil Marine Treatment - amzn.to/3yjZF5t
Salt Terminator - amzn.to/3WtGpLZ
Boat Trailer Parts - amzn.to/4c4yWHM
_____________________________________________
Disclaimer: This video and/or video description contains affiliate links. This means that I am awarded a small commission for purchases made through them, at no added cost for you. Thank You.
floridainshorefishingcharters...
floridanearshorefishingcharte...
mosquitolagoonsightfishing.com/
Captain Drew Cavanaugh Orlando Saltwater Flats Fishing Guide
©2024 Drew Cavanaugh Photography & DRC Enterprises of Central Florida, INC.
Specializing in backcountry flats fishing, tarpon, snook, redfish, cobia and saltwater near coastal fishing. Reef and wreck fishing off the Volusia and Brevard county coasts.
This is the closest saltwater fishing near Orlando, Kissimmee, Cocoa Beach, Daytona Beach, New Smyrna Beach, Ormond Beach, Leesburg, Palm Bay and Disney.
Please feel free to contact me should you have any questions.
Here is a very simple video to show you how to flush your Yamaha outboard after using it in saltwater or a sandy condition. This should be done every time you use your boat in a saltwater environment. You can use this on Honda, Suzuki, Mercury and Evinrude outboards as well.
In this updated video I will explain with a 100% accuracy on using the top flush ports on a Yamaha and Mercury outboard flushing. How to use two hose and "RUN" your engine to get a perfect engine flush. This is the "NUMBER ONE way to flush a outboard" that is used in saltwater. - แนวปฏิบัติและการใช้ชีวิต
![BOWKYLION - เจ้านายคะ (work-life imbalance) [Official MV]](http://i.ytimg.com/vi/6bFj8G2pOi4/mqdefault.jpg)
After watching a lot of videos, yours was by far the most informative and best. Thanks.
Good video man thank you I’ve got a 2013 115 four stroke Yamaha I go out in Apalachee Bay pretty often all I’ve ever done is connect the hose to the flushing adapter and let it run for 15 or 20 minutes am I not doing something? Should I also use the earmuffs?
So you can do both at the same time of one at a time. Doing the earmuffs opens the thermostat.
If your engine is warm don’t bother with the earmuffs if cold use them with engine running too give time for thermo to open
Hi, when my dinghy is in the water can I flush with ear muffs and/or the top port while the leg is in the fully up position. Also should I use salt away through both ports. ?
I am not sure. I would try to keep it lowered. Salt away is more for tackle and gear. Not to be used as a flush.
When I do this sometimes the impeller spins very slowly, sometimes it doesn’t, is this normal?
Yes it is normal. The water is causing it to spin.
Yamaha does claim running the engine with only the top water connection can harm the water pump. Using both looks to be fine. If only one hose, you do recommend only "running" the engine with the muffs on, correct ?
You are correct. If using just one hose do teh muffs. However you can do both, just one at a time.
@@Cavanaugh68 Great job on the new Vid :)
If just using only the muffs, how long after the motor is started does it take for water to come out the pee hole? How many seconds or minutes?
A few seconds, no longer than a minute for sure.
Great video ! Have the same question, as I just used the muffs only and there was no water at all through the pee hole after about 10 seconds or so. Is it still normal ?
The other thing I’ve noticed that the amount of water or it’s flow that being dispensed near the intake inlets does not change after the engine is started. Does it mean that it could be something wrong with the impeller or the water pump itself ?
Thank you !!
It depends on the amount of pressure and flow of the water. If low, it takes longer for water to come out the pee port since the entire engine must fill up before the uppermost port expels water. You should see it pee after about a minute max. AND you should obviously see it pee whenever it is running in the water. I always notice that it is peeing while still in the water before I shut it down for this exact question.
I use just the top connection with engine off is that good enough it’s my only option anyway I’m in boat slip
Yes
@@Cavanaugh68would that open the thermostat and flush the whole engine?
What prop are you running please
Power Tech 17 pitch 4 blade
Dum question but what if have 2 or 3 outboards , or can you run one motor at a time ?
Yes
No sé necesita arrancar el motor cuando llegues de la pesca está caliente solo enjuagarse agua dulce....
Aún querrá enjuagar el motor con agua mientras está funcionando para eliminar la sal del termostato.
Can you use the muffs only?
Yes, you can. Just make sure the engine is peeing.
Yes as long as your water pressure is good and constant
My local dealer said they run them just by the port
Yes you can, but I do both.
Now I have a 19 175 sho mine will not send water out the pee hole…….had the water pump changed and still no water out the pee…
Sounds like a clog some where.
On my 19 sho will not pee with just the head phones on the bottom…you must submerge the lower fin above the prop……
can you run the motor using just the top flush?
NO. Use the headphones and the top port at the same time.
Definitely NO!
but why use both at the same time? wouldn't the muffs be enough? if were trying to run it to open the thermostats, wouldn't less cooling water flow be better? quicker to temp, longer time flushing all connective passageways?.... lol next time you replace the impeller, hook up the hose. if forceful water shoots down the pressure tube, id say you probably have enough lubricating water to run the engine. we know plenty of people are running their engines and getting away with it. maybe there is enough getting down that tube...
Just puts more water in there one, two if you use just the port you cannot run the engine to open the thermostat.
I don't see why your method would not be OK, I just can't find anything from Yamaha to confirm your method is OK.
Because Yamaha wont acknowledge it. Run both.
Rediculous!!!!
Ears on the bottom run motor
Hose at the top is a static flush, not running.
End of argument!!!!?
Listen, if you watch an dread the video instructions it clearly states USE BOTH at the SAME TIME to flush the engine while running. TWO. Not just the top port, but the headphones also.
To be honest I watched anouther video and they ran the motor with just the top flush let it go for 30 min Prior to run they inspected the impeller then again after with no damage at all and engine did not overheat.
@@marines0001Can you send the link?