Skoda Superb VW Audi Seat Subframe Bush Replacement | Laser Tool 6250
ฝัง
- เผยแพร่เมื่อ 15 ก.พ. 2020
- In this week video i try a new tool the VW Audi Group Laser 6250 tool changing a 2011 Skoda Superb subframe bushing, quite an interesting experience as you probably know they are quite a pain to press it in place as they bulge going through and catch the hole for the dog bone mount. I specifically bought the laser 6250 for this job as i did't really fancy removing the subframe making the job a lot quicker and easier...
Few hiccups on the way as first time using the tool and also this kit fits vehicles up to 2010 which became a slight issue working on a 2011 vehicle . I ended up emailing laser technical department and they assured me they don't make any extra bit to fit cars newer than 2010, but because the actual bushing and the hole in the frame is the same size it worked ok.
Laser 6250 Tool Link 👉 amzn.to/3gelOEH
Hey everybody, Igor here from Cars Exposed thanks for tuning in.
I will be uploading videos here every week Thursday at 18:30 sharing my experiences working around cars on my driveway, exposing issues, auto repair, auto electric, oil changes, services, projects and more...
Cheers 👍
⬇🔻⬇🔻⬇🔻⬇🔻⬇🔻⬇🔻⬇🔻⬇🔻⬇🔻⬇🔻
➤ Subscribe for More content !!!
goo.gl/3uHc1E
Click here for my previous video:
➤ th-cam.com/users/CarsExposedv...
Did the video Help you ?
Buy Me a one time Coffee and Help the channel !!!
➤👍 ko-fi.com/carsexposed
Instagram
➤ / ce_channel
Contact Me:
➤ Carsexposed@yahoo.com - ยานยนต์และพาหนะ
Props to you for showing what happens when it doesn't go according to plan
Experience is the best teacher mate, do not worry for some obstacles. great work..
The tool looks a big help on that job, I like how you stopped and checked the bush and realigned it, and thinking outside the box to get it aligned properly without the extra part in the kit fitting. Good job mate
Mechanic Matt thanks mate luckily the bushing was ok but the tool is great I couldn’t do it without it 👍👍👍 cheers
Having this tool would help me a lot. I've done loads of these in the padr and I've always removed the subframe completely 😂
Great stuff Igor and well done making it work with the tool, that's the sign of a great thinker, the ability to adapt to the situation and get it done....great skill to have 😀👍
Thanks mate I always heard a good mechanic is also a good problem solver, I'm better prepared next time knowing the tool limitations 😉👍👍👍 cheers mate
Yet another good video! Always a joy to watch :)
mmiqu thanks mate I’m glad to hear 👍... It’s my pleasure to make them 😊👍👍👍cheers
Good tool makes job done easily
I love new tools happy day's
Paul off the wall 😊 me too mate ... thanks for watching Paul 👍👍👍
Very good Igor!
👍👍👍
LM Auto Repairs thanks mate 👍👍👍
👍 nice one mate! Useful tool!
thanks mate, the tool is superb well made hopefully I'll do better next time knowing the tool limitations 😉👍👍👍 cheers
A fast effective way to complete the job and move on to the next. Pretty expensive tool and I only wish that tool was available in the States as a rental for my one-time DIY use. Looks like I'll drop my subframe and press the slow way. Great demonstration!
Michael K. Thanks mate ... 👍👍👍
@@CarsExposed So I was not able to press in the bushing evenly or without damaging the bushing case with my H-Frame hydraulic press. I fumbled around with different sized bushing collars, but nothing worked. I ended up biting the bullet, and bought the Laser 6250 from the UK. The task went much smoother and faster. The 6250 is a quality fabricated tool. It was a pretty expensive tool for my one-time job, but was worth the joy of replacing myself. Worked on my 2006 Audi A3. Thanks again for your video!
Great to hear that you managed to get the job done , unfortunately without the proper tool it’s quite difficult perhaps you can sell it and get some money back 👍👍👍👍
@@michaelk.3845 where are you located in the states and would you rent out?
@@agatone1369 SW Michigan. If I loan it, then I'd rent it out for what I paid +shipping to you and refund when I received it back. Send me a PM
Installed...Everything serviceable...Coped with an imperfect situation! Nice work Igor. P.S Your videos are one of the very few that I think the subtle use of a sound track is very well done! The production is excellent. It's obvious you put the time and care into that aspect of your content. Thx & Cheers M8
TheGibby3340 thanks mate, tricky one without removing the subframe but we got it there in the end 😊...
I really appreciate that mate I’m glad that it shows, I spend quite a bit editing I really enjoy the whole process and even thinking about how I would like to present the video, it’s a learning curve for me but I think we are heading in the right direction 😋👍👍👍 cheers
Great job mate 👍
Cheers mate 👍👍👍
muy buena opción
How's she goin'? Too bad about the first attempt and that Laser doesn't have an adapter for newer cars. But I was impressed that it got the bushings in place. You could never have done that without the tool I bet. Nice that you show that things don't always go as planned or expected!! The real world we call it right!!! Take care!!!
Bit of a fail there😊 I'm better prepared now knowing the tool limitations , definitely couldn't get the job done without it . Absolutely the real world Mike I always leave the problematic and fail bits in with less cut as possible I find them always the most important thing to show, as they say the mistakes are the best teacher right 😉😊😃👍👍👍 Cheers mate
Nice job mate I love specialist all they make your life so much easier laser make some great stuff off I love them personal overalls I've been thinking of getting some myself
Laser does quality stuff mate I'm just glad I don't need to remove the frame to do this job, the overall is brilliant specially in this weather it keeps you nice and warm 👍👍👍😉 cheers
thank you for the post. i had a question.i have a skoda octavia mk 2.done twice alighment the car drives straight with a slightely off center steering wheel.could it be possible that i need to change the subframe bushing?thank you in advance
Great video! Expensive tool... but it will pay for itself over time and it's a time saver not having to remove the subframe!
Thomas EXOVCDS Hiya mate, Yeap that’s what I thought I actually refused 2 jobs recently because I didn’t fancy removing the subframe and didn’t have any pressing tool kit, I hope they comeback I’m better prepared now . Thanks for popping by 👍👍👍
@Cars Exposed how long is to remove subframe then???
Great vid, have just borrowed my mates tool, exactly the same has yours, but the 2 set screws that screw the bar into the subframe is missing, have tried 6mm with a 1mm pitch and 6mm with a 1.25 pitch but neither fit, any chance you could check the size of yours for me ?. cheers . Spike
Thanks
How to figure out if subframe mounts are bad... Does there any wobbling upon in gear acceleration???
You could maybe get a g clamp on there instead of that bracket that would be enough to stop it flexing. As always a great video..........Cheers
thornwarbler cheers mate 👍 great suggestion I’ll try that when I get another one 👍👍👍 cheers
can this tool also be used for a 2013 VW passat tdi?
Just done one of these - subframe off the car. Absolute awful bushing design - always catches on the cut out. I used a generic bushing tool kit, with a threaded rod and cups etc. Had to improvise and use a steel back plate with a hole to pull the bushing through, one bushing at a time. Just like you it kept catching on the slot cut out - in the end i filed down a large chamfer in the bushing where it tends to bulge/catch and using a small pry bar whilst tightening the cup i managed to get both halves of the bush in.
Much cheaper than spending £300+ on the laser kit - although it does the job far more easily it still runs into the bulge/catch problem for the later models.
Pain in the balls this bushing mate exactly what I’ve experience with this car , well done for doing it without the laser tool I haven’t regretted it buying it but no where near perfect for the money 👍
This is the same Skoda you did an engine mount replacement in May 2018? If so, any particular reason why you did not replace the subframe bush back then?
You could use a small C-clamp for the thing that Laser doesn't provide.
Oh it's the Skoda again .... 🙈😂😂😂 Great job Igor! I think at this stage you should take out life insurance on the poor thing! 👍☺️
Niamh Healy 🤣🤣🤣🤣😋... she’s been so good to me 💰 💰😋... thanks Niamh 👍👍👍
What a nice tool, what the hell vw design
great vid, thank you You didn't pull it level you could see that has it was pulling in
Where are you based? And do you still do this bushing work seeing it’s a pain??? My 2014 Passat 2.0 needs it
excellent post. If only the laser wasnt £££ . Need to find a used one or perhaps one from HK made of pig iron
Hola, a que marca de vehículo aplica esta herramienta?
Cracking job buddy. Those personalised overalls?
CAN Diagnostic cheers mate I had 3 overalls without anything on it so I thought why not having the channel name on it , looks ok I think 😉😋👍👍👍 cheers
Hi there!
Great video! I saw you had mentioned that the tool isn’t quite made for your year of car, however you were able to get through it. Do you believe this could be used on a later model such as a Mark 7 golf to get the job done?
Yes, but... the bar that holds the block over the hole where the edge of the mount pokes through... that bar can't be mounted to the Mk7 subframe. So you have the problem of keeping the mount from poking out the hole and getting caught as the mount is pushed in.
Where can I get this tool please!
Thank you for not editing the install portion.
Great video! I found the cheapest price 300e for that laser kit.
Do you know where I can get it for less then that, wouldn't mind 2nd hand one?
Cheers
Sorry man i don’t know where you can get it cheaper I bought mine for £300 a couple jobs pays for it 👍👍👍👍 cheers
I just bought mine for a bargain £160 👍💷👍. Guy only used it once so it's literally brand new.
I now have my first four cars booked in.
How did you sort the top bush?
Didn't show it on video.
Did you remove it?
I’ve removed it all and tried again, when the top bush was about to hit the edge of the hole in the subframe I’ve supported it with a little pry bar 👍
good job! Did you use the tool on a metal subframe? On the site it says it's used for aluminium subframes.
Yes I did. It’s only suitable for a variant of subframes but it helps with all of them when you have to pressed the bushing with the subframe off the car 👍
Can I ask how much a garage would charge to do this job? Without the tool there is no way I'm gonna try that!
if you chamfer the bush slightly, it wont hang up on the hole when your pressing it in !
Cheers mate 👍👍👍
Boom first !
Georgi Georgiev 😁😊 cheers bud 👍
Welp, looks like I'll be dropping the subframe then. Air hammer and seal driver time lol
Great video couldn’t you use a g clamp to hold that bar from moving
Wayne thanks mate for the suggestion I’ve got a big G Clamp I’ll try that next time we will how it goes but I’m planning to get my friend to CNC a slightly longer B9 piece hopefully it will work 👍👍👍 cheers
An easy fix for the non fitting b9", would be to use an old school C-clamp.
How long does it take to do this job when you have this tool? an hour or less?
On the floor like me probably a hour and a half
New tools, so shiny lol, is there room for a g clamp to hold it firm or even mole grips perhaps.
We love shiny new tools right 😉😋😁... I think so mate I’ve got a g clamp to try next time the job comes along, I also asked a friend to mill a bigger clamp thingy like the original one but slightly longer we will see 👍👍👍 cheers
I wish this tool wasn't so expensive in the U.S.
Joshua M not cheap but so handy 👍👍👍
I noticed you forgot to use an other alignment tool that goes inside the "window",
It works with some cars but it didn’t work with this one unfortunately .
I can't believe you admitted your tool is bent it's alright mate a lot of guys suffer with that🤣🤣🤣🤣
😂😂😂😂😂🤫🤫🤫 Don't tell anyone lol 👍
How much is this tool? Where to buy
I bought it on Amazon here is a link amzn.to/3gelOEH 👍
@@CarsExposed cheers
@@peterdodd8883 no worries mate my pleasure 👍
You coud do with a garage mate with a lift
Mark Smith that’s the dream mate have a little place somewhere, hopefully soon 🤞... cheers 👍👍👍
Mal tem espaço debaixo do carro
Leonardo Said bem apertado lá meu brother sem a ferramenta ia ser muito difícil, teria que remover o subframe mas mais um trabalho feito.. Valeu aí por aparecer obrigado 👍👍👍
this is hands down the worst bushing design i've ever seen