6250 | LaserTools Front Engine Subframe Bush Tool
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- •Designed specifically to replace the engine sub-frame steady bushes on an extensive range of VAG models
•No hydraulic press required
•Application:
•Audi A3 from 05/2003
•Audi TT 08/2006 to 06/2010
•Seat Altea from 03/2004
•Leon from 05/2005,
•Toledo 111 from 04/2004 to 05/2009
•Skoda Octavia from 02/2004 to 12/2010
•Volkswagen Caddy 111 from 04/2004 to 08/2010
•Eos from 06/2006
•Golf Plus from 01/2005
•Golf V from 10/2003 to 2009
•Golf V1 from 10/2008
•Jetta III from 08/2005 to 10/2010
•Touran from 08/2003
•Passat from 03/2005
•Scirocco from 05/2008
•Tiguan from 09/2007
www.lasertools...
Also, factory service manual says if you do remove subframe you should have the front end aligned afterwards. This kit allows you to install the mounts without having to remove the subframe unlike the factory prescribed method or the VW/ Audi kit. This video SHOULD show that the dog bone mount / thrust arm bolts and the sway bar mounting bolts are torque to yield bolts (TTY / stretch bolts) and MUST be replaced with new bolts. Video and the instructions should also state the torque specifications plus the 90 degree final tightening turn on those new bolts.
God i love tools. This kit is engineered beautifully. Well done. Bravo.
Pretty sure you could get away without loosening the subframe bolts
dang! i need this
Hi I have a Vw Passat 1.9tdi 2007, the info on the tool states up to 2005 but i have the aluminium subframe that looks identical to this, so will it work on my car? Thanks
We've consulted with our Technical team, and they have said it will work on the aluminium subframe.
dat price, tho
This will fit to remove the MQB 2016 golf ?
Hi Ricardo. Our technical team have confirmed this tool only fits the earlier, cast aluminium, front subframes. It will not do the later pressed steel versions, so unfortunately will not fit your vehicle.