Hey there !! Thanks for watching this video! Side note:, Wah and fuzz pedals must be placed before the Buffer. They don’t work that well with a buffer placed after them, but it’s still a matter of preference. 🤗 Godbless you all !!
Bro, I can hardly hear you speaking, at least in the beginning of the video, and the music overlay just makes it even harder. Invest in a lapel mic so you dont have to worry about whether or not your speaking into your mic or not. Keep on sharing the word of God also my man!
Boss tanong lang po kong saan ko ilalagay ung buffer, same ng buffer mo ung nabili ko kasi 2 binili ko, ito po ung setup ko, tuner, noise gate, booster, distortion, delay, reverb, buti nakita ko ung video nyo laking tulong boss👌
Use one as the first thing your guitar plugs into , to lower the pickups impedance of high impedance of passive pickups. Get another to handle the impedance differences from you effects pedals. And your sound will have improvement....100%
I've heard different places to put the buffer if you have a wah pedal. Thinking at the beginning if you have a wah. I just ordered one to spice up my pedal chain. Thanks for posting this video.
I do not recommend this buffer. IT broke tubes in my Amp. After 2 weeks of using, i started to hear strange noises. I didint pay much attention to them, it was like little buzz sound comming from my amp. I thought its ok, coz i have stronger signal, so that's how suppose to be. Few days later, after launching pedalboard i heard a huge high sound. I decided to remove it from my pedalboard, and all buzz and strange noises gone. My bad i tried once again to put this crap in my pedalboard. After putting this in, i started to play and i heard again that huge high signal sound . I removed this, and my Amp started to have buzz noises permanently. Electrician told me that tubes have to much signal on them, so basicly they are broken.
Hey there 👋🏽. Salamat ! Iba't IBA Kasi setting na ginamit ko sa video na to. Pwede mo bang i.type kung Anong minute, para ma review ko at ma bigay ko Ang setting Sayo ? 😊 Hintay Ako SA reply mo... 👍🏽👍🏽
I'm looking at this. I have an FX loop set up to my amp. The tuner, wah, overdrive, volume goes direct to the front of the Amp. Chorus, phaser, delay, tremolo goes through the FX loop. Where would I put the buffers?
What tuner do you have ? If you are using a tuner with a Buffet built in to it , put it After the wah Pedal... that means First of the chain will be the wah... wah pedals don't work so well with Buffers... so IT's always adviced to add them before the buffers. If you have two buffers, you can put the other one After the tremolo before it goes to the effects loop ..thats what I did with my buffer .. I hope this will help 😊👍🏼
I used a Decibel Eleven Loop Expander that has a Class A Buffer and I put the Moskey Pure Buffer at the end of my pedalboard , then a Seymour Duncan SFX-1 Pickup Booster before going into my racks . Mass improvement in the higher frequencies . I may get two more Mosky PB's for the effects loops of my multi effects unit, two for my two Crate Power Blocks effects loops and the effects loop of my Digitech 2112's effects loop.
thats really nice. you can hear the guitar better. the boss metalzone 2 also have a buffer. i think i get one because i dont have a boss pedal on my chain.
@@marting.official ng volume drop kasi everytime nka ON ang Fluorescence , kaya ng ttry ako ibang technique to change yung order ng pedals, since dalawa dn nmn reverb ko yung isa nsa very last in chain, pero ang issue ko tlga yung Fluorescence kaya hinahanapan ko ibang spot s chain. anyway salamat s rply . Nice vid, keep it up! God bless
Hey there, 👋🏽 After the tuner. Most people say tuners should be closest to the guitar so it could be accurate. In my set up I tuned in my multi effect pedal and it's still work fine. But if you have a separate tuner pedal then put the boost after it. 👍🏽😁
Hey there !! Thanks for watching this video! Side note:, Wah and fuzz pedals must be placed before the Buffer. They don’t work that well with a buffer placed after them, but it’s still a matter of preference. 🤗 Godbless you all !!
True and False. Three transistor style fuzzes (e.g., big muff) are fine after a buffer.
Thanks for this info ! 🙂
I just bought one. It's a piece of crap. The amount of noise it makes is just ridiculous. Pure Rubbish.
Sorry to hear that. 😓
In my set up it didn't have any noise and it worked well
You must have gotten a defective Pure Buffer.
Mine worked as promised.
@@diaryofanaxeman539 Could be, many shonky sellers on Aliexpress. But I'm not buying another one.
where should i place the buffer? after or before the tuner?
once you plug it , its always on???
Yes it is.
Wow, Ang joyo american parang naging classic pedal na kahit simulation pedal...
Where should i put the buffers?
tuner - wah/volume - overdrive - distortion - chorus - delay - delay - reverb
[All true bypass]
Hey there ... After wah/ volume and the other one at the end of the Chain...
@@marting.official ok thanks for the fast reply 👍
Bro, I can hardly hear you speaking, at least in the beginning of the video, and the music overlay just makes it even harder. Invest in a lapel mic so you dont have to worry about whether or not your speaking into your mic or not. Keep on sharing the word of God also my man!
Thanks bro! I will invest in it bro.. I'm currently very busy with my studies but when I have time I'll continue making content ! God bless you 😉🙏🏽😇
My new favorite pedal channel
Boss tanong lang po kong saan ko ilalagay ung buffer, same ng buffer mo ung nabili ko kasi 2 binili ko, ito po ung setup ko, tuner, noise gate, booster, distortion, delay, reverb, buti nakita ko ung video nyo laking tulong boss👌
Hi there. Pag dalawa, sa unahan ng lahat ng Pedal mo at SA dulo.... Pero kung Isa lang Buffer mo, lagay Mo SA dulo NG mga pedals mo...
@@marting.official salamat po boss
Use one as the first thing your guitar plugs into , to lower the pickups impedance of high impedance of passive pickups.
Get another to handle the impedance differences from you effects pedals.
And your sound will have improvement....100%
Thanks for this video bro! God bless.
I've heard different places to put the buffer if you have a wah pedal. Thinking at the beginning if you have a wah. I just ordered one to spice up my pedal chain. Thanks for posting this video.
You're welcome 👍🏽👍🏽
Wah and fuzz can be a little impedance sensitive. You won't find much impact to your tone if you go Tuner > Wah > Fuzz > Buffer on the input end.
@@marting.official Thank you but i only have 1 buffer like the one you have, should i put it at the end of my pedal chain or before my pedals?
At the beginning will be a good place to put it. But bare in mind that if you have a wah or a fuzz, make sure to put after them.
Thanks for the message
I do not recommend this buffer.
IT broke tubes in my Amp.
After 2 weeks of using, i started to hear strange noises. I didint pay much attention to them, it was like little buzz sound comming from my amp. I thought its ok, coz i have stronger signal, so that's how suppose to be.
Few days later, after launching pedalboard i heard a huge high sound.
I decided to remove it from my pedalboard, and all buzz and strange noises gone.
My bad i tried once again to put this crap in my pedalboard.
After putting this in, i started to play and i heard again that huge high signal sound . I removed this, and my Amp started to have buzz noises permanently.
Electrician told me that tubes have to much signal on them, so basicly they are broken.
you don't experience unwanted noise using the rowin power supply?
When all pedals are analog ,no . But If it's with a multi effect + analog pedals than there will be noise.
kuya pwede ma ask if ano mga nakaset mo sa zoom 505 mo? same gadget tayo and church basis din eh sarap ng tunog eh
Hey there 👋🏽. Salamat ! Iba't IBA Kasi setting na ginamit ko sa video na to. Pwede mo bang i.type kung Anong minute, para ma review ko at ma bigay ko Ang setting Sayo ? 😊 Hintay Ako SA reply mo... 👍🏽👍🏽
im gonna order another one to put at the end of my chain. wew! nice review bro. im gonna build another board to fit the two underneath though 😅
Yes ! That's a good Idea !! Make sure to make a a good Alibi so your wife will be fine with it. 🤣🤣🤣
Buffer is good for bass too?
Yes 👍🏽
God bless bro, i found your link sa pedalboard ph FB .
Thanks bro... God bless you din !!😊
Gaw wala bia nako g escape ang ads hehe
WA pkoi madawat gaw heheh
I'm looking at this. I have an FX loop set up to my amp. The tuner, wah, overdrive, volume goes direct to the front of the Amp. Chorus, phaser, delay, tremolo goes through the FX loop. Where would I put the buffers?
What tuner do you have ? If you are using a tuner with a Buffet built in to it , put it After the wah Pedal... that means First of the chain will be the wah... wah pedals don't work so well with Buffers... so IT's always adviced to add them before the buffers. If you have two buffers, you can put the other one After the tremolo before it goes to the effects loop ..thats what I did with my buffer .. I hope this will help 😊👍🏼
I used a Decibel Eleven Loop Expander that has a Class A Buffer and I put the Moskey Pure Buffer at the end of my pedalboard , then a Seymour Duncan SFX-1 Pickup Booster before going into my racks .
Mass improvement in the higher frequencies .
I may get two more Mosky PB's for the effects loops of my multi effects unit, two for my two Crate Power Blocks effects loops and the effects loop of my Digitech 2112's effects loop.
thats really nice. you can hear the guitar better. the boss metalzone 2 also have a buffer. i think i get one because i dont have a boss pedal on my chain.
ayos ang cute nung gadget hehehhe
Oo. Laki ng tulong SA tone ..
..anong gamit Bro ng Buffer?
Restores tone loss due to long cables
I bought same buffer, where should it go? near guitar or amp?
I suggest end of your effectspedals /near the amp. 👍🏼
@@marting.official thanks this is my first buffer! also got $20 noise gate
Wow. That's nice. 👍🏽😊 Enjoy your gear 🙂
God bless you Bro.. continue to share blessings and share word of the Lord ..
Salamat bro ! 👍🏽🙏🏽🙏🏽
nice vid lods, Tanong lang out of topic, ano ba order ng Flourescence mo sa pedal board mo?? after dirt or in the middle . salamat☺️
After po... Sinunod ko lang advice Ni Mason Marangela " The Rig Doctor " 😃
@@marting.official maraming salamat lods
@@marting.official ng volume drop kasi everytime nka ON ang Fluorescence , kaya ng ttry ako ibang technique to change yung order ng pedals, since dalawa dn nmn reverb ko yung isa nsa very last in chain, pero ang issue ko tlga yung Fluorescence kaya hinahanapan ko ibang spot s chain.
anyway salamat s rply . Nice vid, keep it up! God bless
Yun din napuna ko.. Kaya Meron akong boost pedal na idinagdag.☺️
@@marting.official nice , okay lods maraming maraming salamat sa pag sagot . Appreciate it a lot! ☺️👍🏼
Definitely a big tone difference. Thanks, but mostly thanks for sharing the Word of God! Many Blessings to you. ❤️
whats best, after tuner pedal or before tuner??
Hey there, 👋🏽
After the tuner. Most people say tuners should be closest to the guitar so it could be accurate. In my set up I tuned in my multi effect pedal and it's still work fine. But if you have a separate tuner pedal then put the boost after it. 👍🏽😁
@@marting.official thanks man👍🏿👍🏿