Thanks for the video! My ice maker had the exact same problem! I don’t think I would of found out the problem myself. I ordered up a new micro switch through amazon and installed it this morning, making ice again! Jus saved me a couple hundred bucks! Thanks again!
Thanks for the video. I'd already stripped mine down and the poorly soldered blue wire from the PCB had come off. I didn't know here it should go and before I took a chance on blue going to blue, I watched your video and at 2:56 there is a perfect picture of where it should be. Thanks again.
Does the actuator trigger the compressor. I did see it was a 3 year old video but mine is not making ice i hope its that part and if you reply that be so cool
One more thing you can check is the dump tray. If the dump tray has a small crack near the switch lever or isn’t spinning properly, that could effect the ice making too. Hope that helps.
It could be the gear/ice tray bracket that spins the ice tray is stripped or cracked. I had a similar issue with my older model ice machine. I ended up repairing the crack with a metal washer that fit perfectly over the cracked portion of my ice tray and it worked for a few more years after that, up until the power capacitors went bad. Hope this helps!
Ice maker goes through all the phases but right before it dumps ice it shuts off and the light blinks when I push the button to start it again it dumps the ice makes more ice and then shuts off before it dumps the ice and on and on
Why does the on button light flash then if I push the button and it restarts goes through the phases right before the ice has dumped it shuts off and starts flashing again can I have to repeat it
Got this problem with another brand, same look... hope this helps... TH-cam is awesome! Especially with people like you!
Thanks for the video! My ice maker had the exact same problem! I don’t think I would of found out the problem myself. I ordered up a new micro switch through amazon and installed it this morning, making ice again! Jus saved me a couple hundred bucks! Thanks again!
Thanks for the video. I'd already stripped mine down and the poorly soldered blue wire from the PCB had come off. I didn't know here it should go and before I took a chance on blue going to blue, I watched your video and at 2:56 there is a perfect picture of where it should be. Thanks again.
Thank you so much for making this video! My ice maker had the same problem. You made my day! Parts are on order. Cheers!!!
A Czep - you’re welcome. Glad you found the video helpful!
Spending all that time to fix a broken limit switch. You've got a lot more patience than me, my friend 😅
Thank you for posting this it helped me repair mine I was about to toss it in the trash 🗑
Thanks for the video! Ordered the same part from Amazon and soldered it in place. Ice maker works perfectly now!
Yo got a part number?
Nice job on the repair, next level!👍
I'm looking for parts for that ice maker. the bracket from the scoop to the ice tray broke. any help finding a parts diagram. Thanks in advance.
Mine turns on and than directly the red led goes on and nothing works...who can help me with this issue
Synchronous motor 50 TYZ the ice boat reverses when it hits an obstacle?(without limit switches)
My ice maker is model @ - WHITE. I am in need of a micro switch - part # 5A-250vac10T85. Also, looking to replacement hoses, too.
Where do you find ice tray for this model?
I have a MAS/Intertek portable ice maker. The fan started making noise. Any suggestions. Thank you
Does the actuator trigger the compressor. I did see it was a 3 year old video but mine is not making ice i hope its that part and if you reply that be so cool
My ice maker that center white piece barley goes up and doesn’t click and doesn’t go down and click either what would I do to fix it
Bro I have Wansa ice cube machine
Working perfectly but I cube very very small. before good. Now not perfect please help thank you
Where is the sensor unit in my new air ice maker
My Magic Chef is going through all the steps and the buttons both click but it's still not making ice the fan kicks on compressor kicks on but no ice
One more thing you can check is the dump tray. If the dump tray has a small crack near the switch lever or isn’t spinning properly, that could effect the ice making too. Hope that helps.
I need my ice maker fix no ice coming. out
My ice make wont turn on ....lights all off
Amazon prime next day delivery, 5 for $6.00 SPDT so they can work in either location
out ice makers shovel does not dump out the ice into the tray
It could be the gear/ice tray bracket that spins the ice tray is stripped or cracked. I had a similar issue with my older model ice machine. I ended up repairing the crack with a metal washer that fit perfectly over the cracked portion of my ice tray and it worked for a few more years after that, up until the power capacitors went bad. Hope this helps!
Ice maker goes through all the phases but right before it dumps ice it shuts off and the light blinks when I push the button to start it again it dumps the ice makes more ice and then shuts off before it dumps the ice and on and on
Why does the on button light flash then if I push the button and it restarts goes through the phases right before the ice has dumped it shuts off and starts flashing again can I have to repeat it
Little water,works no ice