i just want to say thank you for making this comprehensive build guide for the Formbot kit. i have been following along and it has made everything so much easier. have you figured out the sb2209 ebb 2040 canbus setup? i have been fighting with it for weeks and at this point i have more time in failing to get canbus up and running then i do in actually building the entire 2.4 350 kit. im losing my mind with it so i finally broke down and ordered all the stuff to just run wiring to the toolhead until i can figure out canbus or until someone has a single consolidated guide on how to do it. again thank you and i hope to see your next video soon.
I am not at home today. Email me at minimal3dp@gmail.com. I found a website that has detailed instructions for the programming. When I get home I’ll send the link.
the blue pad on the cb1 is a thermal pad. its used to transfer heat from the cb1 to the heatsink. you should install it. it is NOT an adheasive
Thanks.
i just want to say thank you for making this comprehensive build guide for the Formbot kit. i have been following along and it has made everything so much easier. have you figured out the sb2209 ebb 2040 canbus setup? i have been fighting with it for weeks and at this point i have more time in failing to get canbus up and running then i do in actually building the entire 2.4 350 kit. im losing my mind with it so i finally broke down and ordered all the stuff to just run wiring to the toolhead until i can figure out canbus or until someone has a single consolidated guide on how to do it. again thank you and i hope to see your next video soon.
I am not at home today. Email me at minimal3dp@gmail.com. I found a website that has detailed instructions for the programming. When I get home I’ll send the link.
Can you please include the STL files you used?
I follow the guide tried to find them myself but missing the IEC one
Thank you!!
Let me know if these are what you need: github.com/stvptrsn/Printer_Stuff/tree/main/MercuryOne/Electronics_Bay