Wireless Trolling Pro and PWM Trolling Motor Speed Controllers
ฝัง
- เผยแพร่เมื่อ 5 ม.ค. 2025
- This demonstrates the installation of a Wireless Trolling Pro (WTP) digital speed controller for both a stock and modified 12V trolling motor. This installation is also applicable for other Pulse Width Modulation (PWM) digital speed controllers.
**Unfortunately, it appears the company is no longer in business.**
Your videos are REALLY very informative - a PROPER tutor! Please keep it up!
Thank you very much!
I have been trying to figure out how to run my PWM and wireless controller together. My goal is to set the PWM output and have the motor only run with input from wireless controller. I initially tried doing it in parallel with no luck, so I'm gonna try a series setup and hope for the best. I think part of my problem is I set up my wireless controller to also have a manual Joystick controller.
I have never tried to do that. Is the wireless controller the stock item with the trolling motor?
Great Video and thnx for the info. I have a motor myself and the only thing I was concerned by capping off the white and yellow wires was if I had to bypass the coil also that seats sealed at the lower end of the motor. I have read something about possible current backfeeding that is why I am asking. Thnx again.
You are welcome Constantinos.
@@Aksmaniyak so no need of doing any changes on the coil itself that lies at the brush end house assembly?
@@tzionico No. Nothing else.
Hello: I have a inflatable pontoon fishing boat and a 50 pound Minn Kota (MK) trolling motor. I have estimated the average load in the boat will be about 325 pounds. I also have a Mighty Max ML35-12 -Volt 35 Ah battery.
The MK 50 operates on a max power of 50 amps. I am considering buying a PWM controller to obtain better battery use rather than a stock situation.
How many hours of operation can I expect with the addition of a PWM controller? What equipment do you suggest. What other changes might be more efficient? 1) purchase a 30-pound trolling motor about $120 to use less amperage, 2) purchase a larger battery, or 3) adding a second battery?
My goal is to have about 8 hours of fishing time, mostly anchored but with say 1 ½ hrs .of moving from place to place.
I'm a little bit confused. Are you running the positive and negative motor wire on the pwm back inside of the control head and splicing into it? I also have a question on the battery wiring. I have a quick connect positive and negative coming off my trolling motor because I run in hull wiring to the front hatch where I keep my battery. Would it be ok to splice into the the battery wires coming out of the unit instead of hooking the negative and positive battery connections on the pwm directly to the battery? I'm trying to make sure I completely understand everything before I get started.
Does this PWM allow for variable speed control in forward and reverse? TIA
Yes.
I swear its like yall dont watch the video.
You are God send this exactly where I was on my set up😎😎😎👍🏽
Haha. Glad to help.
Without the two wires going to the brushes to reverse the polarity for forward and reverse
where does the switch from forward and reverse take place? If I am thinking this right.
I'm assuming it is in the module.
How long did it take to receive order. And why dont they reply to emails or phone. I am about to cancel order. 5 weeks. No communication back from them. Any info will help.
This is over 4 years old. I have heard many complaints about WTP lately.
HELLO GREAT VIDEO
where can i buy it
thanks
Thank you. Unfortunately, the company has gone out of business.
Enjoy your videos very much. I have three of the wireless trolling pro units and one is defective due to my mistakes of plugging the battery into the output of the unit. Maximum smoke occurred and now does not work. Are you aware of anyone I can contact to attempt repairs since the original company is no longer around?
Thanks Hiram. No unfortunately. It would probably cost more to repair by somebody else than buy a new one. I would just keep it for spare parts.
@@Aksmaniyak Thank you for your advise. Keep up the good work.
Could you reveal which pwm you are using and where to buy? Thanks
I am using the Wireless Trolling Pro brand. They have a website but apparently they have not been active lately. Last I heard, the company was starting up again. If you look at some of my other PWM speed controller videos, I give links to the parts used.
So are you using this as opposed to one of your diy ones. I’ve been debating building on but seeing this now I’m feeling lazy. Does it work as well or better. How’s about reliability. Any performance difference. Thanks for the videos man they have been greatly informative.
Does anyone know if you can use that wired remote on a third-party PWM controller?
I don't know because i have always made new remotes for the PWM builds.
Hi where i can buy an wireless motor control for 50 ah lifepo4 battery and minnkota 30 LB ?
This company doesn't sell them anymore.
I must have missed something. What part of the system is wireless?
The same question has been asked and answered many times. That was the name of the company.
I have a min Kota glide foot control trolling motor 5 do ward speeds it woks only on 1 4 and 5 I have replaced the speed switch same problem can I take the hot wire and run it through a variable speed switch and it work any suggestions so be app
My email is garyforbes111@yahoo.com if u want to reply that way ty
I have never done that so I don't know if it would work.
Where can I get this, can't get in touch with the company. Any info would be great.
The company has been getting a lot of complaints lately and I think they are out of business.
@@Aksmaniyak in a dispute with PayPal now over an order. Thanks for the info. Any other suggestions?
I think somebody who had a problem with them should contact BBB and make a complaint so they can find out what is going on.
How do I go about ordering one of those
Unfortunately, the company went out of business.
Where can I get those components?
Unfortunately, the company went out of business.
Do you know if Wireless Trolling Pro is still open and around? I ordered from them over a month ago, called numerous times and emailed with no response.
I don't know. Some people said they have had a response and others like you said have heard nothing.
Thank you for the response! Hopefully I’ll get it. Thanks for the videos!!!!
Did you ever get your order? I have also placed and order and can’t get anyone on the phone or by email
@@gregkuebrich7737 I got mine a while ago. I know a lot of people have not received their orders. I don't know what is wrong with the company. They are nice people.
Good to see this thread is still active. Please update on orders coming through and any communication received. I’m gonna wait to hear about some successful transactions before I order.
Mr. Aksman you are the man! Could you please give me the model # of the Wireless Trolling Pro PWM Trolling Motor Speed Controller? So I can Go ahead and order one . and how long is the shaft now that it has been shorten? Thank you
Thanks Oscar. Unfortunately, it appears that the company has suspended business operations (or quit). I shortened that one to 22 inches but the length depends on your kayak.
What exactly is wireless about this?
It's the name of the company. They do have a wireless model.
You should post a link to it in the description.
I was wondering that too
Love your informative videos..I was wondering if you could give me the dimensions of the Wireless Trolling Pro box you have the in the video. Just the pwm box not the wireless controller..Thank You Joe B.
Thanks Joe. It's about 3x5. I don't have the PWM anymore.
Hi what size wire did you use ? 8 or 10 gauge?
10.
your opinion on durability for a 99 percent saltwater usage would be appreciated for that controller. good video with great information. thanks in advance
As far as I know, it is recommended for freshwater use. I'm sure you could use it but salt would eventually corrode the parts and you can't wash it down to clean it.
I don't mean to criticize but how is this actually Wireless when there's a wire going from the control box to the switch?
That's what the company name is and they did sell a wireless version.
@@Aksmaniyak awesome thank you I tried looking for one. I like your videos
Thanks Cameron.
Thanks for introducing that great product . Is there any link to where we can buy it . Thanks
You are welcome. www.wirelesstrollingpro.com/controllers.html
Try the controller from Gama www.gamainc.com/product/t-sc-12v/
I have had much better luck with this one than the one you mention. If you try a Gama, call them, they change the frequency of the pwm for trolling motors so there is not any whine. Very responsive to my questions. The negative is that it is only 30amp. So far I have not blown a circuit with a Minn Kota 45. Remote is waterproof and I dropped it in saltwater twice so far and still kicking.
Just ordered the same unit, not super pumped when I told them it was for a trolling motor. Any updates on your setup, failures? Appreciated
Compass Angler did it work for you? I was thinking about ordering one
Cory Turner Working very well, have a 30 amp fuse to protect the unit from damage and no issues yet. It will get hot under constant use however, so have a way to vent it. Plan to make a walk through video of my setup sometime in the future and good luck with yours 👊🏽
How much is this. And their website is down any other place to order this? Thanks.
I'm not sure what the price is now and I see their website is down. I made a video showing how to put together your own for about $40 if you would like the link.
@@Aksmaniyak ya that would be as awsome.
@@jokerz60 Here is the link. th-cam.com/video/M-StVVUvlJk/w-d-xo.html
We’re can I find this device? I would like to wire one into my set up?
Hi Nelson. Amazon sells many PWMs.
Can you send me a link for the controller module variable speed box
How is it wireless? 😀
That is the name of the company.
How do I buy this
The company is out of business.
Were can you purchase
Were do you get the hand held controll?
Is this company still in business? How can someone order this?
I'm not sure if they are still in business because they haven't answered any calls/messages.
Hey man, love your videos. I ordered a wireless one about 2 weeks ago and haven't heard shit from the company... I saw some comments that they might have shut down. Guess I'm going to go get a refund from paypal...
Thanks for the compliment. I think something happened to the owner and nobody is getting their orders. I would ask for a refund.
I heard three years ago, when I bought mine, that the owner and product engineer may have had health problems and stopped shipping for a while. I have a defective one that they won’t replace.
@@mikeg314 I think something did happen to the owner. I have seen the complaints as well. The AZ address I had is no longer valid.
How do you get ahold of someone to buy one? I've been trying for over a week
Many people having been trying to contact them with no luck. I tried emailing them too without any response.
What’s you’re website ?
My TH-cam channel is: th-cam.com/channels/nl__DThu7j5W32-_8BFzkw.html and my Facebook page is: facebook.com/Aksmaniyak/?eid=ARBR24rkjzKP4oDtwLb3Nv4Tzfzm2ZLBiAGyfr7v_otEI2DhM1hAokda1UNxG_iMsYg4xxmHMqy9ID1g
I have a wireless pro I love it
I have had 3 and they all have been great. The customer service for me was also excellent.
@@Aksmaniyak are they still in business?
I'm not sure. Emails and calls are going unanswered.
Where can I purchase it I bought one before and I lost the wireless remote I wanna buy a new wireless remote can you help me out give me a number or an address please I wanna get backup in the morning
Unfortunately, it appears that the company went out of business. You might find some parts on eBay.
Thats so simple
Not sure if this guy represents as a seller or just a promoter of this product but I ordered one a few weeks ago and they won’t answer a email or a phone call, took my money tho, giving it one more week before I report. ordering from them isn’t and won’t ever be a recommendation
I'm neither a promoter nor a seller. I purchased a unit over 4 years ago and made a couple of videos with it. I have heard the complaints too. I don't know if they are still in business.
I just got mine same one that you got but the face plate of the control knob is scratched up and it doesn’t look the same as yours looks like an old version looks like somebody had mine before and then sent it back I hooked it up the way they said to him the way you showed. And when I turn it on it pulsates and when I go to reverse it does the same thing. I’m not at all happy with this unit. I’m gonna send it back and request my money back. I’ve left phone call after phone call to them and I’ve gotten no response. I think this company is not a very good company I know they’re out of Spokane Washington. And I live not very far from there facility. I am very disappointed in my purchase. Anybody reading this do not get this product from this company. You will be sorry
You finally got yours? Many people have said they never received theirs. Do you have the Washington info? I will try again to contact them. Thanks.
Umm, sorry, but that's not wireless.
Watch the video.
Wtf it's not wireless
It's the name of the company.
is wireless pro still in business i cant seem to find them ? do you have a contact number
I think they went out of business. Something very bad must have happened because the website still takes orders that are never sent.