0:11 Turn on. Press and hold power button on gimbal. Beeps. 0:20 Lock camera orientation. Press and hold trigger. Light blinks green. 0:30 Recenter. Double tap trigger. 0:34 Self portrait mode. Triple tap trigger. 0:39 Switch user profiles. Press M Button. 1 Pan tilt Follow, slow, medium. 2 Pan follow slow, medium. 3 Pan tilt follow, slow, low. 0:52 Auto tune. Press trigger and M button simultaneously 6 seconds. 1:20 Fix drifting. App - Status - System Calibration. 1:39 Joystick calibration. Tap trigger 4 times hold on last. Lights blink. Rotate Joystick. If blinks green calibration success, blinks red failed, repeat 2:12 Sport Mode. Press and hold M button. Light turns yellow. Release M button to exit. Double tap trigger while holding M button to lock sport mode. 2:38 Flashlight mode. Press and hold trigger, tilt ronin horizontally. 2:50 Underslung mode. Press and hold trigger, tilt Ronin upside down. Or double tap power button, tilt ronin upside down. Rotate gimbal roll axis to ensure camera upright. Double tap power button to engage motors.
Mine doesn't return exactly to centre, its always off by 1 or 2 degrees after a few pans, unless I double tap the Trigger. My friends is exactly the same.
@@DJITutorials its not the calibration, its the DEADBAND, there is no option for "return to centre" unless u have the settings: sensitivity 100, DEADBAND 0 , which is useless.
@@TheCameraManReviews Thank you for getting back, the gimbal may not return to center in follow mode because of the Deadband, the current workaround is to decrease the Deadband as much as you can and then increase the Sensitivity and the Speed value. If you have encountered issues with such settings, please kindly tell us the details. Thank you.
It is very problematic to switch to "UNDERSLUNG MODE" mode when a cable is connected to the camera. The cable protrudes (protrudes) far beyond the camera. And during the transition to the "UNDERSLUNG MODE" mode, the cable touches the stabilizer. (sony a7RIII)
@@evanbutler9813 We are sorry, we'd love to check the place of the cable when it touches the gimbal and see what to suggest. Hope your kind understanding.
I have a DJI Ronin Sc, And the Pan axis just turning me on, It doesn’t take the same direction with my movement, for example if i Go to the right with the Dji Ronin Sc, the pan Axis Takes an another direction and I Lose the control, i lose the action everytime... even i put it in sport mode, The Sportmode works only in Flashlight position....How Can i Fix this problem please???🙏🏽🙏🏽🙏🏽
Hello, there. We are sorry for any inconvenience caused. We recommend that you run the joint angle calibration in the Ronin app. The steps are as follows: 1) Switch the gimbal to Sleep mode, adjust the gimbal angle properly, and toggle the three axis locks to the locked position. 2) Go to Motor Parameters -> More -> Joint Angle, and tap and hold the Joint Angle icon until the Ronin app prompts Joint Angle Calibration. Click Yes to complete the calibration. 3) Restart the device, and the gimbal will be restored to the correct position. If there are still problems, please contact the DJI Support team and send then a video about through the link below for further assistance: www.dji.com/support/repair They will check and offer you some help, please rest assured. Thank you.
Hi! My RSC is not yet 1 year old but it has major malfunctions. It won't recenter when I double trigger anymore. My pan axis stucks not even half way yet if I move my joystick left or right. I always balance my gimbal and balance test through my phone. Please help me, how can I contact your costumer service so I can ask for advice and show a clip of my gimbal's problem?
Can you do a tutorial or explain how to connect the ronin sc to A7iii via usb c. I want to be able to use the record button on the gimbal instead of the camera shutter. I'm sure there's some settings you have to adjust on the a7iii in order to allow the the camera to connect to the gimbal, just can't seem to figure it out.
Hi Ryan, this is the tutorial about How to Setup Ronin-SC with SONY a7 III Camera, th-cam.com/video/eo-BBk7MoMs/w-d-xo.html, hope this provides you with some info.
Hi there, please refer to this page and the setup method on the page to see if it helps. www.dji.com/support/compatibility/ronin-sc/m50ii If not, please elaborate on the issue you encountered or contact our support through www.dji.com/support. We will do our best to help.
Been using it for a year but today the geen led lights are turned into red. modes are not working properly. Tried all the options, done system calibration too but the led indicators are still red. First i thought its locked in sport mode but no, its not in sport mode. please help me out from this problem. waiting for reply. thanks
Hi there, sorry to read about the issue you encountered. You may try to refresh the firmware to see if the issue can be solved. If not, please contact our support team for further assistance. www.dji.com/support
I am ready to return mine because it’s been frustrating to figure out why mine isn’t working like it’s supposed to. It doesn’t lock when tapping the trigger once. It drifts to the left and right in Mode 1 and 2. We need a detailed video on what’s the best settings inside the app to get it to work for each mode. Thank you.
Mine doesn't return exactly to centre, its always off by 1 or 2 degrees after a few pans, unless I double tap the Trigger. My friends is exactly the same. Its the deadbanding- its designed to be this way (stupid hey)
@@TheCameraManReviews I think it's misleading to make a video to show all the features without explaining that you need to go in the app to customize the modes. I have no issues with returning to center after double tapping. But I am not sure why it won't lock while holding the trigger. Hopefully you will get an answer.
Hi, there. We are sorry for the inconvenience caused. We will forward your need to the relevant team and you can also send a request for your model via this link: www.dji.com/support/compatibility?product=ronin-sc Besides, we are also continuously updating the list, for any updates, you can also stay turn to our official website: www@dji.com. Thank you.
Flashlight mode does not work properly. When I'm trying to circle the object, roll axis makes the camera rotate. So that this thing is useless for me :(
Hi, Can you please help. I try to balance my Ronin SC with Canon M50 + Sigma 16mm and Rode videomicro. Less than 2kg. Everything is OK except for Roll balance. Camera always rotates (a bit) from left to the right and from right to the left. Impossible to balance it perfectly. The application on my phone shows Excellent for everything however I see that ROLL balance is not that perfect like Tilt balance. Should I return the Gimbal do DJI ? or just leave it like that ? Thank you for your help !
Hi there, we are sorry to hear about the diffidulties that you encountered. Kindly please contact our support team via www.dji.com/support, we'll do our best to help this out. Thanks.
Hi there, the tested payload of Ronin SC is ≤ 2.0 kg. You can visit the compatibility list through the link below. www.dji.com/support/compatibility?product=ronin-sc
Hi so i recently bought the ronin SC. But when I use it while moving or walking it micro shakes randomly when I take steps. Im trying to go as smoothly as I can but it still micro jitters for some reason I really need help here cus its ruining my footage. I think when the gimbal is on and I tap the camera balanced lightly it micro jitters aswell so I think that is whats happening when I'm walking.
Hi there, we are sorry for any issue you encountered. Please contact our support team through the link below and provide a sample video for further assistance. www.dji.com/support
Hello, there. This may be in standby mode, please check if the camera is leveled. If you have more needs or questions, please feel free to contact us, then we will reply to you as soon as possible. If you have more needs or questions, please feel free to contact us, then we will reply to you as soon as possible. Thank you again for your support.
Anyone know why the camera control button option isn’t working for me? I have the gimbal cord plugged into my canon T5i rebel (with a cord I ordered separately since the cords provided weren’t compatible) but it’s not doing anything. Is this gimbal just not compatible with the camera?
Hi there, we are sorry to hear about the difficulties that you encountered. Please contact our support team via www.dji.com/support and provide us with more details. We'll do our best to help this out.
Que tal, alguien me puede ayudar? acabo de comprarme este modelo pero al querer conectar mi cel al bluetooth me dice SINCRONIZACION RECHAZADA POR RONIN SC
When i turn mine on it beeps and the 1 lights up green but it does nothing. Does not start actually controlling the gimbal at all, its basically on but actually turned off, wow fml
Make sure your using the power button not hitting the button on the battery directly. Other than that just make sure your holding it down for long enough. You probably already fixed it but I thought I could take some guesses.
I have tried locking the camera orientation. All my axes show excellent levels after balance test, and I have also auto tuned it. I press and hold the trigger but the pan and tilt don't lock. Please help.
You keep saying launch the Ronin app... how. Where? Does it still exist because I can't find it. Mine isn't doing any of the things you say it should do. Tap 4 times and hold on the 4th, nothing happens
Hi, there. You can download and install the latest app through our official website. There is no need to be concerned, as user experience, functions, and privacy protections on apps installed through DJI’s official website are still the same as before, so please feel free to use them. www.dji.com/downloads/djiapp/dji-ronin
@@validuav2577 Glad to know it works. Should you have any further inquiries, please feel free to contact us. We will do our best to help. Have a great day!
DJI Tutorials thank you! Also when I connect the cable To the ronin I’m not being able to use the camera WiFi tool to connect it to my phone any idea why?
Urgent help wanted from fellow users. Just bought a new RONIN SC. The main unit (not the battery grip) has a large silver lock lever, which is used to lock the battery grip onto the main unit, that lock when used as intended does not go and CLICK at the end or anything. It just only becomes slightly tighter, it does its job but there's no tactile click. Have i got a faulty lock or this is how it behaves normally ? I even tried operating the lock without the battery grip and observed the small silver locking mechanism can hardly be seen moving even when the lock lever is moved to lock and unlock positions. Can someone confirm ? Thanks.
Only question I have is.. Will this work on iPhone? I knew that robin sc movements still working but will it be fully functional? My Osmo Mobile can’t handle iPhone XS Max+Moment Lens+small rig setup.
Hi there, sorry for the inconvenience. Should you encounter any difficulties in using DJI products, please feel free to contact our support team via www.dji.com/support, we're here for help.
Hi, sorry that Canon 200D is not on the compatibility list, the functions may not be able to ensure. You may check the compatible camera list at dl.djicdn.com/downloads/Ronin_SC/20190828/Ronin_SC_Camera_Compatibility_List_en.pdf
Hi Tenzin, we are sorry to read about the issue. Could you please tell us the issue you encountered with your gimbal? We will do our best to help. You can also contact us via email at www.dji.com/support
I had the same problem for my a6400. Was driving me nuts because the camera wouldn't rotate as said in the instructions but the test would read, "pan rebalancing needed." Tried it 3 more times without changing anything and next thing you know it was excellent. Go figure.
I didn't realise it was so big. I'm looking at getting a gimbal but pretty sure it will give you arm ache using it like a selfie style for vlogging. It looks hideously large
0:11 Turn on. Press and hold power button on gimbal. Beeps.
0:20 Lock camera orientation. Press and hold trigger. Light blinks green.
0:30 Recenter. Double tap trigger.
0:34 Self portrait mode. Triple tap trigger.
0:39 Switch user profiles. Press M Button. 1 Pan tilt Follow, slow, medium. 2 Pan follow slow, medium. 3 Pan tilt follow, slow, low.
0:52 Auto tune. Press trigger and M button simultaneously 6 seconds.
1:20 Fix drifting. App - Status - System Calibration.
1:39 Joystick calibration. Tap trigger 4 times hold on last. Lights blink. Rotate Joystick. If blinks green calibration success, blinks red failed, repeat
2:12 Sport Mode. Press and hold M button. Light turns yellow. Release M button to exit. Double tap trigger while holding M button to lock sport mode.
2:38 Flashlight mode. Press and hold trigger, tilt ronin horizontally.
2:50 Underslung mode. Press and hold trigger, tilt Ronin upside down. Or double tap power button, tilt ronin upside down. Rotate gimbal roll axis to ensure camera upright. Double tap power button to engage motors.
@Tanner Avery no one cares
@Keagan Juelz no it didn't
Everything I want! Thank you!!!
You sweet soul, you.
Mine doesn't return exactly to centre, its always off by 1 or 2 degrees after a few pans, unless I double tap the Trigger. My friends is exactly the same.
Hi there, please try to calibrate the joint angle calibration and system calibration. See if this helps.
@@DJITutorials its not the calibration, its the DEADBAND, there is no option for "return to centre" unless u have the settings: sensitivity 100, DEADBAND 0 , which is useless.
@@TheCameraManReviews Thank you for getting back, the gimbal may not return to center in follow mode because of the Deadband, the current workaround is to decrease the Deadband as much as you can and then increase the Sensitivity and the Speed value. If you have encountered issues with such settings, please kindly tell us the details. Thank you.
@@DJITutorials you need to add a setting "return to centre always"
Excellent! This is what I needed as beginner!
Same bro, I just bought mine yesterday
@@noelchavezproductions6959 me three...just got mine a couple days ago!
It is very problematic to switch to "UNDERSLUNG MODE" mode when a cable is connected to the camera. The cable protrudes (protrudes) far beyond the camera. And during the transition to the "UNDERSLUNG MODE" mode, the cable touches the stabilizer. (sony a7RIII)
Hi Rustam, can you provide a video for us to double check the case?
The ronan sc isn't meant to do underling mode unfortunately
@@evanbutler9813 We are sorry, we'd love to check the place of the cable when it touches the gimbal and see what to suggest. Hope your kind understanding.
I have a DJI Ronin Sc, And the Pan axis just turning me on, It doesn’t take the same direction with my movement, for example if i Go to the right with the Dji Ronin Sc, the pan Axis Takes an another direction and I Lose the control, i lose the action everytime... even i put it in sport mode, The Sportmode works only in Flashlight position....How Can i Fix this problem please???🙏🏽🙏🏽🙏🏽
Hello, there. We are sorry for any inconvenience caused. We recommend that you run the joint angle calibration in the Ronin app. The steps are as follows: 1) Switch the gimbal to Sleep mode, adjust the gimbal angle properly, and toggle the three axis locks to the locked position. 2) Go to Motor Parameters -> More -> Joint Angle, and tap and hold the Joint Angle icon until the Ronin app prompts Joint Angle Calibration. Click Yes to complete the calibration. 3) Restart the device, and the gimbal will be restored to the correct position. If there are still problems, please contact the DJI Support team and send then a video about through the link below for further assistance: www.dji.com/support/repair They will check and offer you some help, please rest assured. Thank you.
ist it possible to lock the lock mode?
Only if you lock the lock that locks the lock mode
Does this work on a phone if he wants I will buy
Hi! My RSC is not yet 1 year old but it has major malfunctions. It won't recenter when I double trigger anymore. My pan axis stucks not even half way yet if I move my joystick left or right.
I always balance my gimbal and balance test through my phone. Please help me, how can I contact your costumer service so I can ask for advice and show a clip of my gimbal's problem?
I have Sony alpha 7iii a problem with 24-105 Sony
What's the solution
can you please tell me my gimble recording button is not working when i connect my gimble with z6ii
Can you do a tutorial or explain how to connect the ronin sc to A7iii via usb c. I want to be able to use the record button on the gimbal instead of the camera shutter. I'm sure there's some settings you have to adjust on the a7iii in order to allow the the camera to connect to the gimbal, just can't seem to figure it out.
Hi Ryan, this is the tutorial about How to Setup Ronin-SC with SONY a7 III Camera, th-cam.com/video/eo-BBk7MoMs/w-d-xo.html, hope this provides you with some info.
I am failing to connect my camera Canon M50 mark ii to DJI ronin SC through cable. What could be the problem and how to reslove it? Please help.
Hi there, please refer to this page and the setup method on the page to see if it helps. www.dji.com/support/compatibility/ronin-sc/m50ii If not, please elaborate on the issue you encountered or contact our support through www.dji.com/support. We will do our best to help.
Been using it for a year but today the geen led lights are turned into red. modes are not working properly. Tried all the options, done system calibration too but the led indicators are still red. First i thought its locked in sport mode but no, its not in sport mode. please help me out from this problem. waiting for reply. thanks
Hi there, sorry to read about the issue you encountered. You may try to refresh the firmware to see if the issue can be solved. If not, please contact our support team for further assistance. www.dji.com/support
I am ready to return mine because it’s been frustrating to figure out why mine isn’t working like it’s supposed to. It doesn’t lock when tapping the trigger once. It drifts to the left and right in Mode 1 and 2. We need a detailed video on what’s the best settings inside the app to get it to work for each mode. Thank you.
Mine doesn't return exactly to centre, its always off by 1 or 2 degrees after a few pans, unless I double tap the Trigger. My friends is exactly the same. Its the deadbanding- its designed to be this way (stupid hey)
@@TheCameraManReviews I think it's misleading to make a video to show all the features without explaining that you need to go in the app to customize the modes. I have no issues with returning to center after double tapping. But I am not sure why it won't lock while holding the trigger. Hopefully you will get an answer.
A little late but I think you need to hold the trigger for it to lock.
@@Sthomaspdx Ive got the same issue.
@@HendrixFarrell Ive done that too but it drifts down. It doesnt lock.
Hi Dji canon 700D is a Universal camera, please make it compatible with Ronin SC!
Hi, there. We are sorry for the inconvenience caused. We will forward your need to the relevant team and you can also send a request for your model via this link: www.dji.com/support/compatibility?product=ronin-sc Besides, we are also continuously updating the list, for any updates, you can also stay turn to our official website: www@dji.com. Thank you.
Flashlight mode does not work properly. When I'm trying to circle the object, roll axis makes the camera rotate.
So that this thing is useless for me :(
guys please help, how to use vertical mode? It says to double tap M button but it doesn't do anything
Hello there, please make sure your gimbal is on the flashlight mode before pressing M button twice, thanks.
when will you release advanced tutorials ? also please make a detailed video about changing motor parameters in different needs !
I realized a couple videos like that on my channel
Is it possible to mount GoPro or any other action cameras and Android phones in Ronin-SC? Does it come with those mounts?
where do i see the battery % on the ronin app
Hi, Can you please help. I try to balance my Ronin SC with Canon M50 + Sigma 16mm and Rode videomicro. Less than 2kg. Everything is OK except for Roll balance. Camera always rotates (a bit) from left to the right and from right to the left. Impossible to balance it perfectly. The application on my phone shows Excellent for everything however I see that ROLL balance is not that perfect like Tilt balance. Should I return the Gimbal do DJI ? or just leave it like that ? Thank you for your help !
Hi there, we are sorry to hear about the diffidulties that you encountered. Kindly please contact our support team via www.dji.com/support, we'll do our best to help this out. Thanks.
Can you fit a canon g20 camcorder on it? I tried and failed. The battery is too big
Hi there, the tested payload of Ronin SC is ≤ 2.0 kg. You can visit the compatibility list through the link below. www.dji.com/support/compatibility?product=ronin-sc
@@DJITutorials what about a Canon Rebel t5i? I don’t see I on the list but it is light weight
Hi so i recently bought the ronin SC. But when I use it while moving or walking it micro shakes randomly when I take steps. Im trying to go as smoothly as I can but it still micro jitters for some reason I really need help here cus its ruining my footage. I think when the gimbal is on and I tap the camera balanced lightly it micro jitters aswell so I think that is whats happening when I'm walking.
Hi there, we are sorry for any issue you encountered. Please contact our support team through the link below and provide a sample video for further assistance. www.dji.com/support
Just got mine today and when I turn it on the green light just blinks but the gimbal does not work. Any idea what's causing that?
Hello, there. This may be in standby mode, please check if the camera is leveled. If you have more needs or questions, please feel free to contact us, then we will reply to you as soon as possible. If you have more needs or questions, please feel free to contact us, then we will reply to you as soon as possible. Thank you again for your support.
Do i need a special camera or it can be any camera? Thanks
Trigger not working in my ronin sc..please help
Hi, could you please provide a video of your operation for us to check further? You may send the video via email support@dji.com. Thank you.
Excellent information and easy to follow.
Anyone know why the camera control button option isn’t working for me? I have the gimbal cord plugged into my canon T5i rebel (with a cord I ordered separately since the cords provided weren’t compatible) but it’s not doing anything. Is this gimbal just not compatible with the camera?
Hi there, we are sorry to hear about the difficulties that you encountered. Please contact our support team via www.dji.com/support and provide us with more details. We'll do our best to help this out.
Que tal, alguien me puede ayudar? acabo de comprarme este modelo pero al querer conectar mi cel al bluetooth me dice SINCRONIZACION RECHAZADA POR RONIN SC
When i turn mine on it beeps and the 1 lights up green but it does nothing. Does not start actually controlling the gimbal at all, its basically on but actually turned off, wow fml
Make sure your using the power button not hitting the button on the battery directly. Other than that just make sure your holding it down for long enough. You probably already fixed it but I thought I could take some guesses.
I have tried locking the camera orientation. All my axes show excellent levels after balance test, and I have also auto tuned it. I press and hold the trigger but the pan and tilt don't lock. Please help.
Hi there, could you please send a video of the case for us to check further about it? Please send it via email at www.dji.com/support. Thank you.
Same issue. Did you get an answer??
@@meandthexj.2500you ever figure it out?
You keep saying launch the Ronin app... how. Where? Does it still exist because I can't find it. Mine isn't doing any of the things you say it should do. Tap 4 times and hold on the 4th, nothing happens
Hi, Gobi. You could download the DJI Ronin App from our official website. Here is the link: www.dji.com/downloads/djiapp/dji-ronin
Is in the manual. There is a QR code for the app. I had the same issue.
@@joelcaraballo1417 Hi, Joel. May I confirm if your issue has been resolved after downloading the latest version of the App?
Can i use it with Nikon d7500 and 18-300 lens
Ronin app doesn't work anymore on android? Can't find it in the app store
Hi, there. You can download and install the latest app through our official website. There is no need to be concerned, as user experience, functions, and privacy protections on apps installed through DJI’s official website are still the same as before, so please feel free to use them. www.dji.com/downloads/djiapp/dji-ronin
@@DJITutorials seriously thank you so much! Works great
@@validuav2577 Glad to know it works. Should you have any further inquiries, please feel free to contact us. We will do our best to help. Have a great day!
This might be a silly question but Doni have to keep the trigger pressed to keep the camera locked? It’s not clear. Thank you!
Hi Adriana, yes, please press and hold the trigger.
DJI Tutorials thank you! Also when I connect the cable To the ronin I’m not being able to use the camera WiFi tool to connect it to my phone any idea why?
Urgent help wanted from fellow users. Just bought a new RONIN SC. The main unit (not the battery grip) has a large silver lock lever, which is used to lock the battery grip onto the main unit, that lock when used as intended does not go and CLICK at the end or anything. It just only becomes slightly tighter, it does its job but there's no tactile click. Have i got a faulty lock or this is how it behaves normally ? I even tried operating the lock without the battery grip and observed the small silver locking mechanism can hardly be seen moving even when the lock lever is moved to lock and unlock positions. Can someone confirm ? Thanks.
its normal dw with the sc just make sure its tight
Hello! I just want to ask , while you're charging your Ronin SC. Is the battery Indicator supposed to be lighting while charging? Thanks
Yes it should!
Only question I have is.. Will this work on iPhone? I knew that robin sc movements still working but will it be fully functional? My Osmo Mobile can’t handle iPhone XS Max+Moment Lens+small rig setup.
Hi there, sorry for the inconvenience. Should you encounter any difficulties in using DJI products, please feel free to contact our support team via www.dji.com/support, we're here for help.
I can't figure this thing out
I have one this is amazing 🤩🤩🤩
Mine won’t go sports mode
What Sony lens was that?
Please provide the link of ronin download for india 🇮🇳
Does it support canon 200d?
Hi, sorry that Canon 200D is not on the compatibility list, the functions may not be able to ensure. You may check the compatible camera list at dl.djicdn.com/downloads/Ronin_SC/20190828/Ronin_SC_Camera_Compatibility_List_en.pdf
Mine is brand new but I think its broke.
It can be used with canon 80D?
Apparently yes , I saw a few making a tuto about it
we have enjoyed, well worth its money
My ronin sc is is just indicating red light
just got my gimbal and it isnot working
Hi Tenzin, we are sorry to read about the issue. Could you please tell us the issue you encountered with your gimbal? We will do our best to help. You can also contact us via email at www.dji.com/support
@@DJITutorials Everything is working fine, I wasn't aware that I had to initially use the app to operate it.
@@tenzinsangay4535 Glad to hear that it's working well. Should you have any further concerns, please feel free to contact us.
Excellent Use For Videos
super helpful
I’ve tried everything to balance the pan-axis and it won’t balance correctly 🤦♂️ , this is my first gimbal !
I had the same problem for my a6400. Was driving me nuts because the camera wouldn't rotate as said in the instructions but the test would read, "pan rebalancing needed." Tried it 3 more times without changing anything and next thing you know it was excellent. Go figure.
damn..good to know it WILL shoot underslung. I read that it would not shoot in this mode. SOLLLD!
Can you guys please bring in the focus motor programming in app while using track mode...
I can’t wait for mine next week it comes to me
I didn't realise it was so big. I'm looking at getting a gimbal but pretty sure it will give you arm ache using it like a selfie style for vlogging. It looks hideously large
Its not that bad. Its 2 pounds
ARE YOU STILL THERE ON NOV 2020. I RECOMMEND THE SC-2 IS MORE SMALLER AND POWERFUL BUT WITH THE RAVEN EYE TRANSMITTER...
Great tutorial ... my i ask what is the the lens on this Sony body that you showed in the video?
I need a simple cheat sheet
THX!!!
Very Sturdy.
This is hard
anyone else starting to make some videos on youtube?
Auf deutsch wäre vllt auch nicht schlecht 😅
🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
100th comment is the best comment! 😆
Ektu Amar Amar DJ DJ running game bolta amader Bangladesh theek Karke shallow pi Lena
Dead battery after 4 months of unused
Skill issue
@@AraizaEdits 😂😆 you don't know DJI "Dead Just Intime". What a fool