ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Sea-Doo 951 Rebuild Top End - Gray Ghost Resurrection
ฝัง
- เผยแพร่เมื่อ 14 เม.ย. 2022
- In this video I reassemble the top end of the 951 engine. There is another video on how I measured the cylinders and pistons for boring and sizing. Resurrecting a Seadoo 97.5 GSX Limited aka the Gray Ghost. This was the first year of the big 947/951 Rotax Engine
doing this tomorrow. thank you for the video
Hell yeah. Enjoy the journey.
I approached a little different.
I have xp limited. The engine is still in place. So I put the ring on pistons then put pistons inside cylinders.
All I had to do is slide the wrist pin thru piston into rod and clamp it.
I tried your way but it was not working well for me.
Nice work, the quality of the video and detail was very good. Thanks
Glad you liked it!
If you wrap Velcro around rings and get really tight before putting cylinders on really helps with cylinder install. Velcro will slide down piston as it goes on and then can unwrap from piston. Just thought I would share really helped when installing pistons.
That's a really good idea. I've seen people use large zip ties as well. Thanks for input sir!
Which rebuild kit did you got with and how is it now ?
I used WSM. There the best. I'm having carb issues but that kit is solid
hi, whats happen if i didnt put what 8 o rings?
Those are for anti rattle from what I understand. They don't seal out water from the engine since the channels should be sealed anyway. That said if water does get in there .. it will rust and corrode up the studs down where they screw into the case
O como le hecho el aceite al motor
Great description and diy, I see the 243 loctite, what is the other one? Also what piston brand are you using, keep up the awesome work
Follow manual but 518 and also synthetic grease. Thanks for the comment. It's running and broken in now.
@@jonparkmac I seen the break in videos, can't wait to see you let her loose
I have bad rep for always on wot 🤘🤘
@@jonparkmac 😁 give her the juice and let her go
Solo una pregunta yo tengo el mismo motor y soy nuevo en esto ,como se le mide el aceite a esos motores de 2 tiempo gracias
Oil is injected by a pump so all you do is keep oil in tank .. don't premix
Where did you buy the new pistons from? Thanks.
I got them from WSM via friend that's a reseller ..but didn't save much
That's a tidy engine mate can I send you mine and you can rebuild.mine and spray it up like that I blow a ring I belive at weekend