Putting My 165 Massey Ferguson Back Together
ฝัง
- เผยแพร่เมื่อ 12 พ.ค. 2017
- It Was A Nice Day Here On Our Homestead, It Was So Nice I Started To Put My 165 Massey Ferguson Tractor Back Together
~-~~-~~~-~~-~
Please watch: "Our Homemade Bandsaw Sawmill Gives Us Almost Free Lumber"
• Our Homemade Bandsaw S...
~-~~-~~~-~~-~
Just did the same job. Used a 1/2” extension and light bread. Has never failed me yet.
I feel like we’ve walked in a lot of the same footsteps. In 1978 we bought a 1949 Allis Chalmers WD tractor for $100.00 and spent $800.00 repairing it. Rebuilt the motor, split the tractor and put in a new clutch, pressure plate, and throw out bearing. Had to rebuild the brakes, pto and engine governor. I still use it today. I’ve always said that in most things that need to be done, “no one is going to do a better job for you than you can do for yourself”. I see that principle being lived in your life.
Currently have a 165 in the shop. My Cousin got it from grandpa when he passed. Well he was mowing with it and hit a big cable or something that stopped the mower dead, and someone had put a Gr 8 bolt instead of a shear pin. Needless to say currently investigating to see why the PTO doesn’t work anymore.
It does spin, but has no power behind it, same with the hydraulic loader, it does move but has no lifting power, so I suspect it has something to do with the main clutch where its driven off the engine flywheel. My first look in there and it appears to be missing portions of the friction material, but not in an even pattern so I don’t think its a segmented disc? Hard to tell through the little inspection port.
Nice to see the old girl back together again,,
you make things looks a bit easier than I think it might be 4 me any ways..
you have a great day nice to see a video again,,,
These videos are great ... very informative. Thanks Cecil.
Glad to see you have the Massey back together! Great job improvising the tools! I hate mosquitoes too!!!! Be good!
Happy to see you getten the Massey back together. Sorry I've been out of the loop the last few weeks. Diabetes and thyroid been messing me up. Give Heather a great big hug and kiss on the cheek for me. Take care and as always be safe and have fun. ttyl:))
Real good idea on the puller , simple , no cost and it did the job like a three hundred fancy puller. I don't like the mosquitos either , I went for a ride on my Harley yesterday and the windshield was covered with black flies and other assorted bugs.. The tractor is coming along in good shape and I love watching the progress you are making on an old reliable tractor that will outlast anything that is produced today. John
People is Texas think mosquitoes die in the winter here. A few days below 30F Degrees lol. I absolutely hate working on engines but I am very appreciative for the knowledge I do have for working on them. I need to learn how to weld
Nice to see a video great to see the tractor going back together keep it up
Ah the mind is a terrible thing to waste, So making homemade puller and center tool. NICE!! have a nice weekend mr fix it.
The way I used to remove the pilot bushing or bearing was to fill up the hole with grease, then use a round solid bar that just fit into the hole, or an old tranny input shaft if you have one and hit it with a hammer, the hydraulic action would then push the bushing or bearing out.
Old dryer work bench lol. Not to bad of an idea, I have a old dryer setting in my fence row was gonna scrap it but may be a portable work bench now! Lol. 😅
Great job buddy!
Hey guys awesome job on the tractor. I bet you will be happy to have that back up and running. I've been slugging away on my old case backhoe too. Just waiting on some parts now to complete. I bought s little case 444 now to play around with lol. Lori is really impressed lol. Can't wait to go see you guys for a little visit. Have a great day guys. Ttyl
Good job with the tractor. It's sometimes hard to do if you don't have the right tools. But I'm glad you were able to improvise..
تحويل دفع رباعي
I have three and need spare parts
Good job.
E sad si mi dao ideju svaka ti cast
Always a few idea in your head Cecil, great job, I hope my clutch will resist because I don't want to make a job like this, it's a B414 International so you understand for sure, happy to see you again and say byebye to Heather.
We just started with the black flies. Really dislike them.
Thanks for the vids .
Jim
Cecil common way to get that bearing out is pack it full of grease behind the bearing find a rod thats close to the ID of the bearing, insert and hit it with a hammer, bam hydraulic bearing pusher outer. Also on my 165 massey I had issues with the power steering leaking into the case and it took out the old perkins, keep in mind if your power steering starts going low.
I should have read the comments, before I posted the same method.
I deleted my comment.
It's all good, you should have left it then maybe it would confirm that I'm not crazy? Hey we can all grow together, I've learned lots from Cecil and it all started with a love of building sawmills.
Same here SOH.
Every horizontal surface is in danger of becoming a work bench. Good work, getting the tractor ready for phase 2 of the "big dig"? Is that the same tractor that you fixed the steering earlier? If it is, it should be non stop for the summer.
To remove the spigot bearing just take the flywheel off and knock it out from the back only take two mins.
To remover the pilot bearing just take the flywheel off and knock it out from the back.
Good morning dear I have a tractor mf 165 engine Perkins 4.203 The diesel pump was damaged There is a part of it (cam ring) I want to replace it and I do not know the code. Can you write me the original number. I live in a war zone where there is no service
Hi how are i need help i have trak 185/72model i have proplem in chlatc dark can you send namder fon
Happy to see you getten the Massey back together. Sorry I've been out of the loop the last few weeks. Diabetes and thyroid been messing me up. Give Heather a great big hug and kiss on the cheek for me. Take care and as always be safe and have fun. ttyl:))
Get well soon Terry and take care
Terry Usher we are sorry you have been unwell :( cecil and I hope u get to feeling better real soon. Sending a hug your way. :) Take care Terry, and we wish you and your family all the best.