ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Is Your iPhone Restarting? How To Fix. Panic Logs & Troubleshooting Tutorial
ฝัง
- เผยแพร่เมื่อ 8 ส.ค. 2024
- This is the most common reasons why an iPhone will restart every 3 minutes.
🌟 Access my Panic Log Cheat Sheet here: vccboardrepairs.com/paniclog-...
►Check out my Tshirts, Hoodies & other merch store merch.vccboardrepairs.com
►Join the new Facebook Group for Repair Techs vccboardrepairs.com/vcc-fb-group
►Buy Our Seek Macro Lens: vccboardrepairs.com/buy-macro...
►Let me teach you to Microsolder: vccboardrepairs.com/profixerr...
►Full list of Solder Tools: www.vccboardrepairs.com/gear
►Mail us your iPhone/iPad for repair: www.vccboardrepairs.com/conta...
In this video, we’ll show you how to:
✅How to diagnose an iPhone that restarts every 3 minutes
✅How to find the panic log in the settings
✅How to use the iDevice Panic Log Analyzer by Wayne Bonnici
✅Which parts cause 3 minute restarts on iPhone X, XS, XS Max and iPhone 11, 11 Pro, 11 Pro Max
✅And more!
♥Donate to Wayne Bonnici, Panic Log Analyzer Developer: paypal.me/waynebonnici
💻Download Panic Log Analyzer here: github.com/waynebonc/iDeviceL...
Follow the video for instructions on how to install it.
Works on Windows only.
When dealing with an iPhone X, XS, XS Max or iPhone 11, 11 Pro or 11 Pro Max, there are some sensors that are required to be detected, in order for the iPhone not to restart.
These models require the Charging Port to be plugged in or else it will restart every 3 minutes.
iPhone X
iPhone XS
iPhone XS Max
These models require the Charging Port and the Power Button Flex to be plugged in, or else it will restart every 3 minutes.
iPhone 11
iPhone 11 Pro
iPhone 11 Pro Max
In scenarios where you have the appropriate flexes plugged in, but it still restarts, then you either have:
- Bad or damaged flex
- Low quality aftermarket flex
- Liquid damaged flexes (check other flex cables, like volume, camera, antenna, etc)
- Or it could be something else
In the video, I go through how to review the panic log files to get some clues that will point you closer to a possible solution.
Here's a full list of Panic Log errors that you may come across and their potential solutions: repair.wiki/w/How_to_Troubles...
I haven't been able to fully test an iPhone 12 series, to see which cables are necessary to prevent 3 minute restarts. If you have figured that out, comment below with your findings! 👇👇
► Like us on Facebook: / vccboardrepairs
► Follow us on Instagram: / vcc_board_repairs
⚠ B2B & Wholesale pricing for mail in repairs is available for repair shops in the USA. Contact us for more information: www.vccboardrepairs.com/conta...
Please note: This page contains affiliate links. If you choose to make a purchase after clicking a link, I may receive a commission at no additional cost to you. Thank you for your support!
Read more about the rest of the panic logs & common solutions: vccboardrepairs.com/panic-log-list/
Thanks so much bro
Thanks for your videos. My iPhone 12 Pro Max is 16 months old and it has restarted twice in 16 months. Is this a serious problem? Today it restarted while watching a TH-cam video. Is this is a serious problem? Any fix for this?
Checked your list. Doesn't have this one "SOCD report detected: (AP watchdog expired)", from my iphone 14 plus
Nice and educational! Love this software, and thanks for all the links!
Glad you enjoyed it!
well explained ! i have a question tho, my panic report shows that : missing sensors mic2 prs0. i brought to the repair shop, changed the charging port, it only last for a day then it keeps restart again til today. do you know which part am i missing ?😅
Wow, thank you so much! Thats awesome. I´ve had problems with the 11 series when using the laser machine! Always removed all components while using the laser machine, but still the phone would reboot after reassembeling! It make sense that its the power-button cable that was causing it! That you so much! :) :) :) Great to know how to read the panic log!
You're welcome. Check out my latest video on this topic: th-cam.com/video/V_GEGB0lerU/w-d-xo.html
I go into more detail
Subscribed thank you bro only channel with a proper informational video about this issue that you would have to watch 10 other videos that are half nonsence to find
Thank you very much!
Very informative and helpful I wish I could have the same equipment so I can DIY myself to fix the issue on my IP XS as I booked it in iphix belfast yesterday and still cant figure out whats the issue if my XS that keeps on restarting hope that they will watch this video and fix ny phone really soon.
Shout out to iphix belfast and thanks Mr. Cruz!
Send them this video!
It's most likely the charging port
Hi Jesse, my iphone 11 pro max show below issues: charging port flex / pwer button flex/ NAND/ Wi-Fi Module
how to fit it.
Good job!!! Thanks for sharing, this video was shared in great detail.
Thank you! Appreciate the support!
Jesse, checked panic log for se 2020 and said mic 1 sensor. Can you slave charge port? I did but still restarted. Does it have to be installed?
Excellent.. a question, I have a 14promax but at all times only the screen turns off, not the cell phone, and I have to wait for it to turn on again, any suggestions? I don't get the panic full files...
Hi can you please help with the diagnosis my iphone 13 is failing and i cant understand the panic logs. The service center guy says to replace the motherboard.
Hi, I'm from China, I saw your content, thanks for your videos, I learned a lot. Thank you and I congratulate you.
Awesome! Thank you!
Thanks for the tips
Hi, great video. Greetings from Romania :) I was wondering if you could also help me. I have a panic log from a Iphone 11 with indicates as posible issues Nand or Wi-fi. What schould I check? thank you
Great video! What if the panic log analyzer can't detect any panic logs? There are multiple panic full files...reinstall the analyzer? It's an iPhone 11 Pro Max.
i haven't seen that myself so i'm not sure. but the principle remains the same, check what the panic logs says & see what "missing sensors" are missing
Beautifully explained
Thank you so much 🙂
Another very informative video Mr Cruz, thanks!
Thanks man!
Really bro u save me thinks
Happy to hear that
Hi Jesse Cruz why did my panic log analyzer 1.7.0 say could not identify any issue?
3 times this man has helped me, thank you Jesse, thought I had a Nand issue, found out it was my PBF
Glad to hear that!
Thank you sir for sharing Very good information ❤
Hi and thanks for your great videos! I've changed the charging flex on my iPhone SE 2020, the issue didn't change - still 3 mins reboot from mic1 panic until last night I ran a diagnostic tool and it stopped rebooting for about an hour. When I verified that I had just ran a diagnostic app (phone doctor plus) that diagnosed all of the sensors as having good health. I don't know if that was a coincidence or not. Then it started rebooting again every 3 mins and then the morning after it again stopped rebooting and lasted about 20 minutes. Now it is back to rebooting again every 3 minutes. Ran the diagnosis just in case. The lower microphone works just great by the way, tested with iOS audio recorder app. Would you have any idea as per why is this happening? What would recommend as next step to look into? Thank you
Hi Jesse. My panic full log is preventing me from backing up my photos to iCloud. How can I fix it as I’ve already got a new phone. Note that my restart happens less often and my phone can function for 30 minutes.
This was amazng, heled me see what is wrong with my phone! idk how to fix it sadly but at least now i know!
Hi Jesse, thanks for all the great information. Its hard to find a good tech that knows how things actually work! Got my iPhone 8 at the store to be fixed and they replaced the IC chip/board saying that was the issue (keep restarting) Issue returned shortly after got the device back. Tried recovery etc nothing helps. Once I recover from backup or start as new device it works for a short amount of time then starts rebooting again and again. Any advise? Iil check the log as you mentioned and hope I find something there.
You'll have to review the panic log & see if you can find any clues to what's causing the restart.
greetings! I have an iphone 11 that reboots every 3 minutes. The information from the panic log appears in all the logs that I have Possible Issues
Charging Port Flex
Power Button Flex.
In 3utool I get this: Problem connecting CPU and peripherals, panic cpu x caller . So should I change the charging port for a new one and the power button flex or just make sure they are well connected? It should be noted that the device fell and the screen broke and it was replaced by a generic one. but the wifi does not turn on or the flashlight apart from the automatic restart.@@VCCBoardRepairs
This man knows his stuff. SORTED THANK YOU 🎉
Awesome. Thank you!
How bro?
Watch the video. I literally explained everything in detail lol
Good Stuff Coach!!!Thank you for the video.
Glad you liked it!
Thank you for the valuable info..
You're welcome!
Your very good at what you do bro your video help me so much thank you 😊
My pleasure! Happy to hear you're enjoying my channel!
so impressive very,thanks
Thank you very much for the best interesting information
It's my pleasure
changed out the charging port with two different units and now its in a 3 min loop :( Any ideas what to look for?
nice info proff
Thank you for watching!
It's really helpful video. Thanks bro.
Thank you for watching!
Thanks so much for this video mate and to Wayne the creator of panic log on windows 🙏, I seen a panic log come up on my phone just now. Becah it’s been restarting itself for no reason, well I thought it was a battery problem at first Buh thanks for the knowledge of this.
Now it’s time to run that PANIC LOGIN and troubleshoot this thing!
Where can you order oem flex cable?
Hi how are you brother I have one iphone xr when I make on coming on but after 1mint go off sometime comes on show screen after opening screen lock go off sometime sting on for 2 minutes
I get an issue where it says 'AOP PANIC - No pulse on' what could this mean?
Great video ❤️🙏, whoever fixing phone for living should follow Jesse
Appreciate it! Thank you!
Hello bro can i send you my panic logs for you just to see what's the problem please
Great video 👍 thanks
Thanks bud!
is there a way to get to the panic logs if the phone just keeps rebooting
Best Video on TH-cam thanks Jesse.
My pleasure!
In data analysis I have full panic but when I read the logs it says no panic logs found. Help me solve this problem
Is there a version of the analyzer for mac? Feels ironic that the apple iPhone analyzer is only available for windows computers.
Currently, this tool has only been developed for Windows. It was created by an independent developer, so that's why it's made on Windows, not Mac.
tx for your tutorial! just yesterday i'm faced with a similar issue - except that my iphone X only keeps restarting when it's idle/locked every few mins for the entire day & night to the point i removed auto-lock to stop it as it's completely fine when it's not idle/locked. checked batt health, storage/memory, bad apps, etc. - everything OK so i thought the only final resort was to reset or send to the iphone service centre to replace some hardware parts. then i read somewhere to try to drain the phone batt and then recharge to 100%. i did this morning and amazingly - the problem seems to have been resolved!!! i hope it stays fine this way...
Bro we’re same issue i will try this method
Hi,I have a iphone 12 pro,It’s earpiece speaker is glitching it works sometimes and it doesn’t when it doesn’t works and i try to make a phone call the phone freezes and restarts again and again and again and when the earpiece speaker works it makes some weird sound before playing some media please reply
Nice one, actually what took me come across this is because am facing this 2 to 3 minutes rebooting issue on iPhone 12 pro max, so by follow this instructions on this video I think I'll get to the bottom of the issue. Thanks
Oh that's great! I'm going to make a guess that it's the charging port most likely.
So you'll see "Missing sensors: Prs0" or "Mic1".
I can install the program on my PC windows 7 error ( setup-exe-entry point not found)
Hey, I finally installed the program and you guess is right what I got is prs0 as you said so am going to replace the charging flex and I'll give you feedback
Make sure it's an OEM or Premium flex
Thanks so much the phone is perfectly working now actually I service the charging flex with alcohol spirit because there’s signs of liquid on the vibrator clip
That a great vid, so what about Missing sensor : TG0B? the problem is on Charging port right? because am facing this issue right now. I'm using iPhone 6s plus with IOS 14.6 IDK if it a software problem. also I cant updated it because randomly restart I tried to update on iTunes but it still restart :(
That means there's missing battery data.
So it could be the battery
The battery connector
Or an issue with the battery data line circuit
hey man iam getting only panic-base logs and phone randomly restart
its very random like 1 day without restarting or hours
the bug type "210""timestamp"
panic string: Unexpected soC(system)watchdog rest occurre
d after panic save chip reset initiated
can you help me please❤
thank you so much sir for this video
You're welcome sir!
Thanks for the tips, very useful:)
You're welcome!
@@VCCBoardRepairs I have a 13 pro max that is stuck at the apple logo and flashes the home screen background every once in a while. Customer says phone is absolutely full of pictures. Is this something with a known usual cause ?
i restored my iphone, so i need to set it up before i can access settings and view the panic logs. My phone restarts before i can get thru the setup problem
Is there a way around this?
Is this the same for iPhone SE 2020? Because I get missing mic1 sensor after not as high drop that even left no signs outside
Check out this video about the SE2020 3 minute restart
th-cam.com/video/GSH2Y-Sp3Nk/w-d-xo.html
Hello, thanks for the video. I have tried to download the panic log analyser but my Windows 10 Computer will not allow it. I get a message saying 'INSTALLATION HAS FAILED - there was an error while installing the application. Check the setup log for more information and contact the author'. I have reported that the app is safe and have checked 'run anyway' but it still will not download. Do you have any ideas how to make the software download it? Thanks
Never ran across that, so i'm not sure. Do you have another computer you can try it on?
Is maybe your anti virus software blocking it?
Great video!
Thanks!
I’ve only had my iPad panic once. Dart USB error. What does this mean?
Amazing video bro! Commenting to keep the algorithm going😊
Thank you! Appreciate the support!
Thanks Jesse 🙏🏾
Not a problem!
You know where to buy a power flex in Australia, I bought few they don’t work, flash light turns on but it still reboots
I'm not sure. I buy mine in the USA
Hello! I hope you respond to this. When i do this and saw that my logs say "missing sensor(s) TG0B TG0V" what are those mean?
Those are generally related to the battery or battery data line.
Wow, great video 👌
Appreciate the support!
Great video thank you so much you saved hella time :)
Glad it helped!
The video was very helpful.
Glad it was helpful!
Hi how are you brother I have one iphone x turn off after 2 or 3 then not turning on unless I have to remove battery flaxy and put back when go's off then not even charge
Try a new charging port.
Followed your video and panic lig said Mic 2 so I ordered a new power button flex. Will let you know how it turns out. TY Jesse.
Jesse, the power button flex fixed my problem like you showed us on this video. I was able to download ios update w/o phone restarting. TY for your help.
great!
11 pro max have same problem but apple service center advise me change Motherboard????????????
Hai
Thanks for the information. I have same issue on my iphone 11 pro. As guided by you in this video it is showing that “Refresh Count over limit error”. Could you please help me to fix this issue.
i'm not sure.
Thank you very much for your grat video. I have iphone 12 mini and get error missing sensors tp3r. if i separate the board and only test the upper board i get nothing error. Do you have any idea.
i get this error after i solderd the board please see my video about iphone 12 mini
thank you for answering
I think TP3R is due to a bad screen. I would suggest to test with known good parts.
@@VCCBoardRepairs okay thank for answering if i separate the board and only test the upper board it work fine and before the handy fall down and destroy it work fine. Do you have any idea?
Thank you
You're welcome!
My 8plus is switched off when it exposes to sunlight does any one have solution for this
Hello Coach. First of all thanks for your videos.
My Idevice Panic Log is not detecting my iphone SE 2020. Im having the 3 minutes reboot problem. Its actually interesting because it detected once and never dectected anymore.
Do you have any clue on what it could be?
Thank you in advance
Does 3u tools detect it?
I have an iPhone 13 Pro. It started restarting randomly, definitely more than 3 minutes (maybe every 30 minutes?). I haven’t dropped it or anything since I got it. The only thing I can think of is it’s in front of my car AC for a while sometimes. I have four panic-full-2022-05-23…ips files. What do you think is the issue?
I'd recommend watching the video in full to get an idea of what to do & how to read the panic log files.
Same here
Thanks! I have "Missing sensor(s): TG0B TG0V" What is likely to cause that?
The phone is unable to read the battery data
Hey what does kernel data abort mean ? And can you please let me know a solution. I just bought it like 2 months ago. Its iphone 12. It ll be very helpful if you would reply
That's not enough information to know what's going on. If you're not a tech, I'd recommend taking your phone to repair shop to have it diagnosed.
hello, what to do if the panic log says this one, missing sensor TG0B (the device does not see the battery)
TG0B usually means a bad battery or some battery data line issue
Helpful👍🏼
Glad you think so!
Great video thank you
Glad you enjoyed it
Hey Jesse, I have a panic log called sensor array I don't know what that is and my phone restarts once in a while
Watch my latest video:
Watch this video for a tutorial on how to troubleshoot and read the panic logs
th-cam.com/video/C2687jnfDGQ/w-d-xo.html
Hi jesse, on my iPhone XR, it says missing sensor(s): TG0B TG1B. What does that mean?
I cover this in my latest video: th-cam.com/video/V_GEGB0lerU/w-d-xo.html
nice work man
Thank you!
so cool thank you❤️❤️
thank you!
Jesse - Can you recover my non-backed up data on iPhone 7 ( 512K) that is stuck in start-up boot loop for not enough free data. ( Need photos/deceased family & contacts. ) Happy to send/pay or view a video? Thx
Yes possibly. If you're in the USA, contact me for a quote: www.vccboardrepairs.com/contact-us
Thanksss man ! this works for me :)
You're welcome!
Hi jesse please reply to me, i did what you have said but in the possible issues it said " Could not identify any issues" but its still restarting. what could be the problem? pls help
Hi. Well it's hard to say without looking at it myself. if you're not a technician, I'd recommend stopping by a local repair shop to have them help you solve it.
Thank you so much for your information. This is super helpful. Can you please help me check what the problem is?
AOP PANIC- SCMto:0-main(5)OUTBOX3 not ready-nuser handlers:
InEiger::probe=0[e4301]conn=0
PrASComp=stat[100]
Hello Jesse, thank you for the video, its very informative. I'm wondering if you can help me?
I recently repaired the back glass of my Iphone 11 with a heat gun (300 degrees). I removed the motherboard during the heating but foolishly I left the flex cables connected. So when I reconnected the motherboard it began restarting every 3 minutes. The panic log shows missing sensor mic2 prso, AOP Panic (no pulse on ox113b3a0 - audio), missing sensor(s): TG0B TG0V.
I inserted the motherboard in to a different iphone where the flex cables were perfectly fine and it still rebooted every 3 minutes? But the motherboard was working before I changed the back glass and I did not expose it to heat at all.
Any ideas as to why the motherboard still has the panic logs on it on a different phone? Thanks 😊
What is the panic log error when you have the motherboard in a known good housing?
If you get to the end of my video, I also mention about measuring the power button lines to see if there's a disconnection ok the motherboard
hello Iphone 11 pro max 3 days ago, it stopped by itself once, I pressed the power button, it came on, this happened once, would it be a problem and panic full error was reported on the same day in the settings
if it only happened once, i would say maybe just a software glitch.
Question i have a iPhone 11 checking the analytics I see code prs0 missing sensor thermal monotype d however my charging port still works can get a full charge but still reboots after three minutes so would you still suggest a replacement of the charging port or power button flex ? Or could it be a motherboard issue?
Meant to mention I have a error message which states iPhone doesn’t recognize battery or camera so could it be due to a non genuine part?
Prs0 means there's an issue with the charging port flex. Doesn't matter if it charges ok, since the charging port has multiple functions, not just charging.
Mr.Cruz i have the same problem with my iPhone Xs it reboot every 2-3 minutes but in panic logs for me it shows 0 Prs0 sensor missing! What can be the problem?
Did you get a chance to watch the whole video? I address what it means when the panic log says Prs0 is missing
Bonjour Jesse,
Vidéo très très intéressante !
Je connnaissais déjà ce journal mais j’avais du mal à interpréter et exploiter les informations.
Merci beaucoup pour ces détails.
Merci 🙏🏼
Ceddine
(France)
Merci!
@@VCCBoardRepairs c’est sincère et mérité 😉
Sorry, I don't speak French 😅
@@VCCBoardRepairs I told is sincere and deserved 😉👍
what is bug type 210 iphone?
is it can resolve if i reset all content and setting on my iphone xr? my problem was it hang and keep restart again and again after 10 second. ive done checking on analytics and there is a lot of panic here. i no longer to use idevice panic log analyzer. so how?
i'm not sure i understand your question.
can i download idevice log analyzer if my laptop is macbook air? cause its not working on my laptop
No, it's Windows only software.
very helpful
Glad it helped
how about my phone went black screen with loading symbol for just 2seconds and it made my phone type my passcode it happens to me just 1 time🤔
Very informative video. Thanks. And i have one question, my problem is missing sensors mic2. So i need to replace the same. If i buy power flex from mobilesentrix, will it works without rebooting?
Assuming it's not a board issue, then replacing the power button flex, it should work,
If it doesn't, it's probably a bad power button flex or a sandwich separation issue
@@VCCBoardRepairs ok where can i buy OEM or original power flex?
I buy them from mobilesentrix.com
@@VCCBoardRepairs ok thanks🙏
May you update if you change the power button flex and if it’s success
Approx. how much is the cost to fix this issues? My iPhone Xs got liquid damage went inside washer. Mine has the 2-3 min reboot issue too.
If you're in the USA, send me a message for a quote: www.vccboardrepairs.com/contact-us
Can you fix panic full - Kernel data abort. at pc?
I dont know
hi jesse it's showin that the possible issues are crystal,NAND,Wi-Fi Module or interposer what can i do?
i dont know
Really bro u save me thinks