Removal of Wet Cylinder #4 sleeve from a CASE 580B Backhoe
ฝัง
- เผยแพร่เมื่อ 26 ธ.ค. 2020
- This is something I tried to get the sleeves out and it worked fairly well using the slide hammer. 3 of the sleeves popped out fairly easy, the 4th sleeve was a bit harder but it eventually popped out. I already had this tool for use on the other farm equipment and it saved me $$ from having to buy a different tool. If you are looking to try this the slide hammers should be rentable from your local auto parts store.
Engine is a CASE G188D 3.1L Diesel 4 cylinder Inline
Sleeves are 4"+ ID
I broke down and bought a wet sleeve puller from a high end tool supplier and the high price was well worth it. It saved me hours putting new sleeves in my 401 diesel.
Right tool helps a lot
Thanks, I need to rebuild my 188d in a Case 450 crawler. Might need a block and a crank. Have looked for a complete engine, but have not been able to find one.
did you ever get this tractor back up and running? how much time did the whole process take?
Its far easier to just make a puller its easy to build