This video shows how to setup SIMCOM SIM900A Mini Check out my website : electronicseternit.wixsite.co... Check out my FB for more electronic guides : / electronicsforlife11
I have the same type of gsm module here in Zambia 🇿🇲. The problem is that its blinking continously every after a second and that means its not connecting to the network. What should I do to solve this problem?. Thank you in advance
Well, can start checking the basics like money balance, data and signal reception. If that doesn't work, you might want to contact your local SIM Card provider to check if there is any restrictions.
Hello, i have a similar PCB with SIM900, when on, the module sends RDY +CFUN: 1 +CPIN: READY +PACSP: 1 Call Ready (9600 bauds), whei send to the SIM900 la comman "AT", the module responds - AT -, dont receive - OK - . Its damage the pin TX of the PCB with SIM900? what can i do to test and verify if a need to buy another new brand module?
To be honest, it's hard to verify a working module from one that doesn't. One of your best bet would be to liaise with your vendor. If that is not possible, I suggest you buy another working module and test to compare the output.
Hi, I have a question what is the problem when it says in the serial monitor sms sent successfully but then I didn't receive a message. And it also prompt an error message of AT cmgf
Can you try this tutorial on sending SMS th-cam.com/video/lCoB5kr2sgo/w-d-xo.html Also, check the phone number. Maybe it needs a country code extension
Each of those batteries in the video are 3.8v and since it's connect to Arduino's DC jack it will draw current according to the circuit's need. This GSM would generally around 2A or less to work.
Hello. So I am using an external power supply of 5V 2A and the GSM can register to a network without issues, but when I try to send messages through Arduino, no messages are sent. Why is this happening?
Can you try this tutorial on sending SMS th-cam.com/video/lCoB5kr2sgo/w-d-xo.html Also, check the phone number. Maybe it needs a country code extension
![🔴 [TRỰC TIẾP] Tứ Xuyên (Trung Quốc) VS BCTT Trường Tươi Bình Phước | Cúp VTV9-Bình Điền | JET STUDIO](http://i.ytimg.com/vi/5nF-PCh_Ojw/mqdefault.jpg)
how many recepients thus the gsm module be able sending messages?
if network LED doesn't blink what to do.And only DC-PMR led is on in SIM 900a
Please how u check if gsm is connected to Arduino uno using hardware serial port
J' aime sa . Que dieu vous bénisse
I like your video
Check the power and try varying the location. If it still doesn't fix the issue, it could be telco restrictions
same problem. from Philippines.
Hello! can I ask if your gsm sim 900 worked?
Mine Owen dosn't blinking. I dont no what to do
نبي part2
I have the same type of gsm module here in Zambia 🇿🇲. The problem is that its blinking continously every after a second and that means its not connecting to the network. What should I do to solve this problem?. Thank you in advance
Well, can start checking the basics like money balance, data and signal reception. If that doesn't work, you might want to contact your local SIM Card provider to check if there is any restrictions.
Hello, i have a similar PCB with SIM900, when on, the module sends RDY +CFUN: 1 +CPIN: READY +PACSP: 1 Call Ready (9600 bauds), whei send to the SIM900 la comman "AT", the module responds - AT -, dont receive - OK - . Its damage the pin TX of the PCB with SIM900? what can i do to test and verify if a need to buy another new brand module?
To be honest, it's hard to verify a working module from one that doesn't. One of your best bet would be to liaise with your vendor. If that is not possible, I suggest you buy another working module and test to compare the output.
Hi, I have a question what is the problem when it says in the serial monitor sms sent successfully but then I didn't receive a message. And it also prompt an error message of AT cmgf
Can you try this tutorial on sending SMS
th-cam.com/video/lCoB5kr2sgo/w-d-xo.html
Also, check the phone number. Maybe it needs a country code extension
Hello sir , you told TX to RX and RX to TX of arduino but why you connected it to 7 and 8 pins?
Hi, this is just the first video. Please watch Part2 to understand better.
th-cam.com/video/8nH-Bh3Ky9g/w-d-xo.html
Hey Please do a tutorial of that Sim900a With Fire detector 3pins😔😔I really really need it.
You might want to check out the below video and see if it helps
th-cam.com/video/lCoB5kr2sgo/w-d-xo.html
Can i know how much V and mAh for 18650 battery to power up the GSM?
Each of those batteries in the video are 3.8v and since it's connect to Arduino's DC jack it will draw current according to the circuit's need. This GSM would generally around 2A or less to work.
goodday do you have tutorial abour sim900a bulk sms ?
You can view below videos to understand about the SMS Feature :
th-cam.com/video/lCoB5kr2sgo/w-d-xo.html
th-cam.com/video/8nH-Bh3Ky9g/w-d-xo.html
Can i use it to conect to internet and connect in that way to my own app?
Yes, it should be possible for GSM to connect to internet.
Hello. So I am using an external power supply of 5V 2A and the GSM can register to a network without issues, but when I try to send messages through Arduino, no messages are sent. Why is this happening?
Can you try this tutorial on sending SMS
th-cam.com/video/lCoB5kr2sgo/w-d-xo.html
Also, check the phone number. Maybe it needs a country code extension
What are the rating of dc power supply
5V 2A
Are you going to be building a web page to use GSM to interface?
For now, only using it to send text messages. Maybe in the future, i will explore on its https requests and etc
if network LED doesn't blink what to do.And only DC-PMR led is on in SIM 900a