Lime Street/Runcorn Grade Tutorial - How To Get Up!|SPIRIT OF STEAM|Train Sim World 2
ฝัง
- เผยแพร่เมื่อ 30 พ.ค. 2022
- A how to, on the way you should go around getting up the two main grades in the Spirit Of Steam route, first being at the beginning...Liverpool Lime Street & the other being just past Runcorn. Hope this helps!
HUGE THANKS TO DOVETAIL GAMES FOR PROVIDING US AN EARLY ACCESS KEY
Help us reach are sub goal of 6900 by June 30th, any help is greatly appreciated
Feel free to contact me through the channel Discord server!
/ discord
Want to support the channel, donate here!
paypal.me/BritishAce
Buy Yourself Some Merch!
teespring.com/en-GB/stores/th... - เกม
wow, you back the reverser off so far so fast ! It works better than what I'm doing though so I'll give it a go :) Then all I'll need to do is learn how to control the braking LOL
Aye great to see you :) Lol
Thanks for this! Now i just need to learn how to brake properly, I go slow on passenger trains cause if I go fast I won't know when to brake and end up over running the platform
That's a good video! It will be very useful.
Glad you think so!
I followed the steps but I always run out of steam before exiting the climbing
Make sure you have auto firing mode on - found in the settings
Hi great videos you are doing is there any chance you can do a video of this scenario as I am stuck at the part where I have to reverse up the incline I cannot get up I slide all the way down through a red signal The scenario I am stuck on is Chapter 2 Day Tripper Branch freight clock face colliery - Speke Junction
Apply sand on the front and give it very light regulator only about 8% and then release the brakes
I've climbed out of Lime Street without using the sanders with 12 on. I'm always late at Edge Hill though. Every time I do this run I stop at Crewe , before tha analyses screen appears, I get a blue screen saying "an error has occurred update system software" although when I try that, it says the latest updates are already installed. This is on an original PS4.
Unfortunately this is an issue currently
Hi great videos you are doing is there any chance you can do a video of this scenario as I am stuck at the part where I have to reverse up the incline I cannot get up spirit of steam drive this branch freight service from ditton junction to speke junction I am on xbox
Which scenario is that :)
@@TheBritishAce The scenario I am stuck on is Chapter 2 Day Tripper Branch freight clock face colliery - Speke Junction
How do you recover after a stop or maintain speed I can’t ever get over 20mph or maintain it for more than 5 minutes and when I stop I gain speed really slowly unlike when you first load in and gain speed quickly
I’d say you most likely have low steam pressure. Once you get moving it’d be a good idea to open up both dampers in the locomotive. And with you not getting over 20mph, I’m wondering if you’re backing off of the reverser at all
@@bearhydegaming6114 thanks for the tips I’ll have to give them a go!
@@nationwidecoinhunt1176 yeah man it’s no problem! You’re welcome! :)
@@bearhydegaming6114 well to say they worked is an understatement, they’ve just made me have my first spad in this dlc lol! Thanks again for the help
Steam Firing Mode - Automatic
Please make a video on the edge hill gradient, I know it's only 0.8% but with full mineral wagons and starting on a hill it's impossible to climb
Is that the left hand bend heading over the fast lines? If so I recommend going above the 20 limit to tackle it
@@TheBritishAce no, it's where the service starts
Also, whatever I do, I just cant get this one train moving, it's loaded mineral wagons on the ends with 6 planks in the middle
Check to make sure the Handbrake is off. Every time I start at edge hill the handbrake on the loco has been on
@@seaniam81 I've tried that and I think what's wrong is the trains so heavy while also being loose coupled, the 8f can't get enough momentum and the steam chest pressure locks up
Does this work on x box, cant get over 10, despite following your advice
Think there has been some physics changes unfortunately
Followed younto a tee ,was10 mph slower
I think there has been some physics changes since this release
@@TheBritishAce tried again less than 10 mph
On both gradients I'm on ps5 and yet I still lose speed
I think it's a console issue. I've followed these steps on the same service, second by second and matching each setting exactly. No matter what though, the speed always begins to drop off around 13mph, then starts to pick up again in the low 7mph range.