3 BEST Ways to CUT Glass - Without Glasscutter!
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- This video is packed with tips and tricks on how to cut glass without a glass cutter. From using a spark plug to a screwdriver, we'll show you the best ways to cut glass without a lot of hassle. If you're looking for an easy way to cut glass, then this video is for you!
🔴 Subscribe for more tips just like this: / @rookie.handyman
This video is NOT sponsored (some product links are Amazon affiliate links which means if you buy something we'll receive a small commission).
Tools used in this Project:
Autolite Iridium XP Automotive Spark Plugs:
amzn.to/3LPEnAo
Soldering Iron 60 W:
amzn.to/3QbS27s
High-Grade Carbon Steel Driver Bit:
amzn.to/3ZNC3PW
If you enjoyed this video, please like and subscribe to the channel!
Thanks for watching, and be sure to watch more of our DIY videos.
* * * * * * * * * MORE VIDEOS * * * * * * * * * *
🎬Watch our most recent videos: www.youtube.co...
How To Remove Stickers from Mirror or Glass
► • How To Remove Stickers...
How To Inflate Car Tire With Gas Station Air Pump
► • How To Inflate Car Tir...
How To Disassemble and Reassemble the Mechanical Pencil
► • How To Disassemble and...
How To Cut Glass WITHOUT a Glass Cutter!
► • HOW To CUT Glass WITHO...
#glass #howtocutglass #glasscutter
I was going to wait until tomorrow to get the proper tool, but now I realise I don't need it, anything harder than glass will do (with enough marking of the glass) thank you! :)
Right on, anything with hard sharp edges will do this trick 👍👍
Yes this what world needs. Western world need n number of tools to cut a simple glass.
Thanks for a right to the point, short and timesaving video. Exactly what i was looking for.
You're welcome! I’m glad you have found value in this video, will keep working because of these types of comments 👍👍👍
Lovely to see our Bro Irfan is a muslim Guy. You are very innovative
Thx a lot, trying to keep it interesting and engaging. Glad you liked it 👍👍
@@rookie.handyman i'll keep supporting you
@cutekaleemanaya9580 thank you I appreciate that very mich 👍👍
Exactly what I looked for! 👍
Glad it could help! 👍👍
Thanks Buddy.
You are welcome bro 👍👍
Awesome man!
Thank you!
Happy to help! 👍👍👍
thanks brother I liked your technique
You are welcome, I’m glad it helped 👍👍
Sharp ceramic method didn't yield a straight edge compared to the rest of the two methods. Perhaps if both sides are marked by ceramic tool, it will give a sharp edge.
Suppose I had to cut squares of 5cm×5cm. Which method will work?
Yup, it takes a little bit of practice with ceramic but it can work. For that small piece, it would be best to try a drill bit (high carbon drill bit), maybe practice on some glass first 👍👍
Thank you man .greetings from Brazil 🇧🇷
You're are very welcome! Thank you for your comment and greetings to you too. All best my friend! 👍💪
Thanks 👍
You are welcome 👍
Awesome thanks
Welcome 😊
Thank you so much
You are welcome 👍 glad it was helpful 👍👍
Could this work for cutting a hole for an outlet in a gym mirror? With tempered glass?
Tempered glass is very difficult to cut in my experience, because if you put too much pressure on it it can shatter into little pieces.
If you have some spare glass parts, make a hole shape with a glass cutter and then use a soldering iron on that cut edge, this should be the easiest way to make a hole.
But please, try it on something you can throw away just to be sure.
Good luck 👍👍
Totally not gonna make a bong
Me neither I just need to cut a flower off of the bong lol😂
Totally gonna make a bong
@FISHYFINN1000 hehe nice idea 👍👍
It's amazing❤
Thank you 👍👍
شكراً لك 🇸🇦
👍👍 you are welcome!
Amazing... never thought those tools would work! You taught me better :)
Glad to hear it and I’m glad I could help 👍👍
Thanks
You are welcome! 👍
شكراً
Lovely know I can get my Rolex 😂😂
Goog Job
Thank you 👍👍👍
what's the 3rd one?
Carbon tip drill bit, try it 👍
you just saved me thank you
Glad it helped you 👍👍👍
beautiful
Thank you 👍
❤❤❤
Thx ❤️
Thanks for in information, but just to let you know “Ceramic” is supposed to be pronounced like “Sir-Amic” instead of “Ceramic-amic”
Great video none the less
My bad, English is not my first language, so sometimes I struggle with some unknown words. But, thanks to this, next time I will get it right 👍👍
Not working me what I m doing
Make sure to cut it with sharp edges, all 3 methods must work, maybe your glass is too thick?
just ask a glazier to cut it, it wont be expensive (if its one piece of glass i would probably do it for free)
Yes, they probably would do it for free, but using these methods you can do it immediately if you have just one or two pieces to cut 👍
That was very knowledgeable. Thank you for that, sir.🫡🙏🏽👍🏼
You are very welcome, glad it was helpful! 🫡🫡💪👍👍