Got my first Jeep in Nov 2020!! I love it!! These videos y'all have up have helped me DIY so many mods and upgrades!!! just did this upgrade in about 20 minutes. Went right down the line without a hitch!!!
There is no need to remove the grill. Drivers side you can reach in and remove the cap and bulb, Passenger side remove the air box and do the same. very easy
Hey guys i noticed in the mopar catalog you can buy the factory led headlights to install into a JL wrangler that did not come with the LED group, do you know if they are plug and play or do you need to go to the dealer to get them programmed after install. its a whole headlight assembly replacment not just a bulb. maybe a video thanks
So, comments suggest that the LED goes L/R with the word oracle on top. But they also say High beam on the bottom, with our power how do you tell? Thanks
The LED upgrade from the factory is pretty expensive, and if you didn't get that option, the oracle headlight bulbs are an inexpensive way to get a good lighting upgrade!
Yes, here is a link to an LED fog light option: www.cjponyparts.com/diode-dynamics-led-fog-light-bulb-6000k-cool-white-pair-jeep-wrangler-jk-2010-2018-jl-2018/p/FGLA83/
Aren't you concerned about heat from stuffing the balast into the housing? I have nearly the same bulbs, and the instructions said NOT to stuff the balast into the housing.
@@CJBroncoF150 I also wondered about that. One thing I might have missed if you said it was Do these have the fans or are they fanless bulbs. Thanks for the review and installation video. Very nicely done. ~G~
Hi guys, I recently purchased a 2019 JL with the stock halogen lights. I'm shopping around for an LED kit was wondering if I'd have to change the headlights or simply just the bulb. I read that it's better to change the complete lights assembly to LED instead of just installing an LED bulb. Only changing the bulb isn't the best option because of the lens inside the assembly. The bulb but won’t be as powerful as changing the light assembly to a led headlight. Is this true?
I'm not professional but I did looked into lots of videos. I think what you are concerned is resolved by those resistors [the little rectangle bits he tucked in]. There were some LED installations I've viewed, they need to buy those resistors separately to avoid issues. That way you dont need to buy the entire lamp. And I dont think the reflectors are worse than LED lamps as they were suppose to house halogen, which have a lower lumin power.
I looks like we currently don't have them. Here is a link to the ones we currently offer for the JL www.cjponyparts.com/wrangler-headlights/c/4553/?product_chassiscode_wrangler=4258
I just installed these in my JL. I have a question, but is there any weird way you have to turn these during install? Mine almost look like they face toward the middle at night. Maybe they are supposed to be like that.
These light bulbs are bright but only lasted just long enough to pass the warranty period. Had to replace one after two years. Luckily they only come in pairs because the other went out less than a year later. Won’t be buying oracle products anymore.
Im new to this also. Plan on buying the 2021 sport s model. Is it better to just upgrade the bulbs or to get new headlights assembly for brighter performance?
It’s people like you who blind other drivers on the road with this bs “upgrade”. You want a true upgrade? Get projectors. So you don’t become a road hazard.
These bulbs use the same housing as factory, projecting light in the exact same manner, just brighter and more crisp. If you get blinded on the highway its normally due to improper headlight orientation.
Factory housing isn't designed for an LED bulb thus why its dangeous as it scatters light into oncoming traffic. LED bulbs require a smaller reflector housing or a projector.
Angel Rodriguez exactly. There’s a reason why we have projectors. It has a cutoff which makes sure the led or whatever bulb you’re using doesn’t scatter above what’s necessary.
Got my first Jeep in Nov 2020!! I love it!! These videos y'all have up have helped me DIY so many mods and upgrades!!! just did this upgrade in about 20 minutes. Went right down the line without a hitch!!!
Great video. That’s all I needed to know. Thanks! 👍🏽
Most excellent video. I'm installing mine to day in my 2021 JL Wrangler. Thank you. Joe
There is no need to remove the grill. Drivers side you can reach in and remove the cap and bulb, Passenger side remove the air box and do the same. very easy
I think I will just install auxiliary Hella lights on the front bumper for the extra punch in case I need the extra illumination
This works for a 2024 Wrangler as well.
Thank you! 🙏🏾
Thanks for watching!
your link does not show the bulbs!~
Oracle Lighting 6500K H13 LED Headlight Bulb
@@kukolino Do these fit the 2019 JL Rubicon?>
Hey guys i noticed in the mopar catalog you can buy the factory led headlights to install into a JL wrangler that did not come with the LED group, do you know if they are plug and play or do you need to go to the dealer to get them programmed after install. its a whole headlight assembly replacment not just a bulb. maybe a video thanks
So, comments suggest that the LED goes L/R with the word oracle on top. But they also say High beam on the bottom, with our power how do you tell? Thanks
Why when you can get LEDs from the factory? Oracle lights last less than a year I had Oracle Halos on my Pontiac G8
The LED upgrade from the factory is pretty expensive, and if you didn't get that option, the oracle headlight bulbs are an inexpensive way to get a good lighting upgrade!
What is the exact complement of this headlight but for the fog lights and side markets jeep wrangler jl 2020
The on board computer is happy, no flashing/flickering or headlight burned out messages on dashboard??????
On board computer is fine!
I'm kind of not smart.... I can't find these bulbs by using the link, provided.
I’ve got a 2023 JL ordered. Will these fit?
One of the wires in the connector that plugs into the headlight bulb came out of mine? Has a blue rubber seal.. How do I get it back in?!!
Wil these work if I currently don’t have LED lights?
Did you guys remove the oracle bulbs from the site?
you guys have an upgrade for the fogs as well?
Yes, here is a link to an LED fog light option:
www.cjponyparts.com/diode-dynamics-led-fog-light-bulb-6000k-cool-white-pair-jeep-wrangler-jk-2010-2018-jl-2018/p/FGLA83/
Aren't you concerned about heat from stuffing the balast into the housing? I have nearly the same bulbs, and the instructions said NOT to stuff the balast into the housing.
Havnt had any issues so far, theyre working great.
@@CJBroncoF150 I also wondered about that. One thing I might have missed if you said it was Do these have the fans or are they fanless bulbs. Thanks for the review and installation video. Very nicely done. ~G~
I don’t see these in the shop anymore. Did you guys pull them?
Hi guys, I recently purchased a 2019 JL with the stock halogen lights. I'm shopping around for an LED kit was wondering if I'd have to change the headlights or simply just the bulb. I read that it's better to change the complete lights assembly to LED instead of just installing an LED bulb. Only changing the bulb isn't the best option because of the lens inside the assembly. The bulb but won’t be as powerful as changing the light assembly to a led headlight. Is this true?
I'm not professional but I did looked into lots of videos. I think what you are concerned is resolved by those resistors [the little rectangle bits he tucked in]. There were some LED installations I've viewed, they need to buy those resistors separately to avoid issues. That way you dont need to buy the entire lamp. And I dont think the reflectors are worse than LED lamps as they were suppose to house halogen, which have a lower lumin power.
How dose the heat sink on the LED dissipate heat if it is sealed in a waterproof headlight housing?
Through radiation, theyre still working in our Jeep perfectly fine.
Do you no longer carry the Oracle Lights? Not able to find them via your link or by searching your site.
I looks like we currently don't have them. Here is a link to the ones we currently offer for the JL www.cjponyparts.com/wrangler-headlights/c/4553/?product_chassiscode_wrangler=4258
they don't show up as compatible with JL, though.
Is there anything that gives you LED or at least brighter white options for the front running lights?
Yup! Here ya go 😀 th-cam.com/video/FX7tx8GJ0Fk/w-d-xo.html
CJ Off-Road not the headlights, the front fender lights 🇺🇸
I just installed these in my JL. I have a question, but is there any weird way you have to turn these during install? Mine almost look like they face toward the middle at night. Maybe they are supposed to be like that.
These need to be clocked so the LED's are facing left and right with the High Beam LED on the bottom.
These light bulbs are bright but only lasted just long enough to pass the warranty period. Had to replace one after two years. Luckily they only come in pairs because the other went out less than a year later.
Won’t be buying oracle products anymore.
Do these need to be clocked so the leds are facing left and right?
YES with the High Beam LED on the bottom.
@@daveayres8276 how do i know which is the high beam? Sorry, new to this stuff
What if I don't have the LED package on my sport S can I use these?? Kinda new to all this.
Yes This is for replacing halogens
@@Alakazam024 cool thanks
Im new to this also. Plan on buying the 2021 sport s model. Is it better to just upgrade the bulbs or to get new headlights assembly for brighter performance?
Will this Void warranty??
TROPICAL JEEPER No
4000 lumen? That's it? Ha yeah no that's not an improvement, better to get 14000 lumen
First time to the channel. Nice review, hate the music! And the graphics. This is why you don't have more subs. Ditch the music!
It’s people like you who blind other drivers on the road with this bs “upgrade”. You want a true upgrade? Get projectors. So you don’t become a road hazard.
These bulbs use the same housing as factory, projecting light in the exact same manner, just brighter and more crisp. If you get blinded on the highway its normally due to improper headlight orientation.
Factory housing isn't designed for an LED bulb thus why its dangeous as it scatters light into oncoming traffic. LED bulbs require a smaller reflector housing or a projector.
Angel Rodriguez exactly. There’s a reason why we have projectors. It has a cutoff which makes sure the led or whatever bulb you’re using doesn’t scatter above what’s necessary.
I hate projectors, the cutoff is so drastic on my Fusion that there is no illumination on road signs. That's dangerous.
The LED head lights has to be properly adjusted using a optical method .. that is right & safe way ...