Roger and Adam are awesome! I live in ga and am planning a trip to there shop just to meet these guys. Besides gaining knowledge from every episode i also gain happiness from them. I thank you guys!! Y'all are the best. Thanks for taking time to teach folks like myself.
Great video I just upgraded to a 6 channel receiver an I used ch 3 for the lights but they don't change through the 3 settings or turn off? Please help
I have an issue to where i turn my car on and it goes on its own. It only goes slow when it goes on its own and it works fine when i use throttle and brake
Excellent, informative videos. I would like to pick your brain if i may. I have a Arrma Granite 3s BLX. I bought used and am starting to perform necessary maintenance to it. It has the SLT3 Transmitter and SR315 Receiver. The truck runs great but only has a 75 foot diameter control range before it shuts down. I can get running again as I walk towards it. The antenna seems to be ok but what do I know. Before I purchase a new receiver I was wondering if it could be something in the ESC like a range fail safe and if there was a way to trouble shoot or reprogram. Thanks.......
You guys are awesome!!! Love how you explain everything plainly!!! I do have a Question… so I replaced my servo and horn today on my Arrma Typhon 3s but when I turned on my Tactic transmitter, there was no communication with my receiver. I shouldn’t have to bind it, should I? Any tips?
I am going to upgrade my rustler, because it has a 27 MHz receiver. Can I just put a 2.4 GHz receiver in without having to do anything else? With that receiver comes a transmitter.
Thanks guys! I have a crawler I’m trying to resurrect. Needs new receiver for replacement transmitter. But the existing receiver looks way different from the new one. I have a Tactic ttx300. The receiver is really tiny and cased in plastic. The existing one is like a circuit board about half the size of a playing card with stuff soldered to it. Can I swap this for the replacement? If so, any tips?
Amazing video new to the RC world upgrading my rc and I find this video thank u so much but have few questions can u run a two speed motor on it as well and winch and light are is there a receiver that does all that for me
Hi my reciver burnt out an melted the red and white wire and also the antenna not sure what to do can you help does it mean I need a new speed control as well ?
I have a old tyko fast fraxxx does this apply to it as well missing controller ? I want to add a new receiver and controller?.. wondering if the radiolink combos will work for me?
When I change my factory ESC & replace it with an upgraded version, will my factory controller still pair up with the new ESC or do I need to get a different controller?
@@Rcstreetshop thanks!.... After more research, I now noticed the piece of the puzzle i was missing lol. I was confused because my stock ESC has the receiver built in. So if I do choose to change it, I will need to get a new controller & receiver. I thought all ESC had receivers built in 😄
Hi! Will in be able to swap the receiver and transmitter in my Kyosho Fazer Mk2 Mercedes GT3? I need a receiver with more channels to instal lights and sirens for my car. Thanks!
@@alexnava8729 Hi, as long as your car has a receiver that is not built into the ESC, you can swap it out & replace it with any new controller. New controllers will typically come with a new receiver. I can recommend you the Radiolink RC4GS controller, it's what I use on my cars. 4 channels, tons of tunability & 1200 ft range. I bought mine for like $60, that controller with receiver. It also has a built-in gyro sensor that can be tuned, enabled or disabled. If your using the car as a drift car, the gyro sensor function can be extremely useful for you.
Guys I need help please. I have team associated rc 10 t4.1 it stopped working. It powers on but theres no wheel movement. Steering or back wheels. How do I remove the antenna so I can install a new receiver ?
There is a small grab screw holding antenna tubing in place (it sits right next to it in antenna housing). Just unscrew this little guy, pull out antenna tubing and you're done with antenna.
Hello, I have a question... if my remote control stopped working because of battery corrosion, do I have to replace the controller and the receiver? Or just the controller?
Hello, I do not quite understand why changing any electronics at all if you battery got corroded? Battery is just a power source. Change to a new one and you should be good.
RC Street Shop what happened was I left the batteries in my controller so the batteries corroded the controller and made it stop working. I still have the receiver in my rc car. But my question is do I have to buy a new receiver as well as a new controller? Or am I able to just buy a new controller and connect it to my old receiver?
receiver of my rc car is damaged and my rc car has 2 motors having 2 wires(one motor for forward and backward movement and the other for left and right steering) . how to fit a new receiver in those motors using a transmitter like flysky fi6 or something similar to it
Hi guys, I know this is an oldier Video and I don't know if you even still monitor but I have a question in this realm. I recently picked up an original Tamiya BlackFoot from a friend of mine it has the original servo controlled speed controller in it and I am trying to connect a radio that I already own to it. the radio is a 7 channel (not gonna stay in the truck) hobby porter HP-007. I think I need to power the receiver because there is a wire coming from the on/off switch that I think connects to the receiver. the problem is that I don't know where to plug in the power connector because there is nothing indicating where the battery should go, each port is marked with a channel number but NO batt connector. any help or suggestions would be appreciated. I'm just trying to get the truck running for my buddies daughter for her birthday :) gonna get a 2 or 3 channel radio for it once it know it runs BTW I already reached out to hobby porter too But I'm kinda impatient LOL.
Guys I need your help. When I turn off the remote control the propeller turns on at full throttle! Causing me to disconnect the battery immediately. Why does this happen?
Typically how much of the receiver antenna wire needs to be exposed? I have a Losi Mini Baja and want to have the antenna wire not sticking up through the body.
This is what I'm here for myself. What I've found out is that there is an exposed bit at the end of the wire and that is what's important. You want that at the top so by pulling all the excess through and hanging the wire down is actually bad. You want that part at the top of the tube. Leave the slack inside the recievers box.
Hey Guys really helpful! have a STX 2 in my new Kraton and it almost broke both my legs last night. There was much Crying and letting of Blood. So it's going or I smash my Kraton. I have an extra tactic 300 & 326 so time to use them. I'm really disappointed that Horizon went down this road. Maybe they'll fix their error with future models, otherwise I may be looking at other Brands. Pretty loyal to Arrma but not going to waste money. have a good one.
Quite often the electronic component (potentiometer) on your controllers' steering goes out. Sometimes by itself, but mostly because of mechanical damage. If there is no input, then this is most likely what have happened. Unfortunately the only way to fix it, is to replace it.
Hi there, Need help and assistance...for my Tamiya plasma edge i lost the transmitter { controller } which was of 27mhz with receiver same frequency 27 mhz .. Is it possible to change or.can i replace a new receiver of 2.4 ghz with new Transmitter, ESC is Tamiya TEU-101-bk .and its good ...so kindly suggest me whether 2.4ghz Transmitter and receiver would be compatible with this ECS .....
Check all trim settings. Recenter the servo arm of it's not properly mounted and centered to the servo gears. If it continues, and only turns that way with power to the radio it's in the settings. If the car sits straight with the radio off and cuts when power to the radio comes on keep checking your trim and channel setting.
![เปิดใจ พี่ญา คนรุม หลังทัวร์ลง หนักสุดในชีวิต!! l [Nickynachat]](http://i.ytimg.com/vi/2-OJZRtclro/mqdefault.jpg)
Why are the oldest videos always the most helpful
I searched the internet for days, to get the answers I wanted, you two did it in less than one minute thank you.
Thanks Mike, we're happy to help!
Roger and Adam are awesome! I live in ga and am planning a trip to there shop just to meet these guys. Besides gaining knowledge from every episode i also gain happiness from them. I thank you guys!! Y'all are the best. Thanks for taking time to teach folks like myself.
We're happy to help Brandon! 👍👍👍
realy good vid but the mic is bad pls upgrade lol
Will do! Thanks for the comment.
I think the levels were just too high. Peaking isn't always a bad mic. Usually just bad config.
NoCommentate yea true
And You talk with a potato in Your mouth
Mic is not bad. You probably mean the audio quality. But this is far from "bad".
Really nice video... Just make sure your audio tuning is up to the mark....
I'm new to all of this. I have a question, what is VCC on the receiver? What is to be connected there?
This is great stuff. Thank you so much for covering the basics :)
that dude on the right talks like the canadians from south park! 😂
LOL
I might get an arrma senton mega, and the radio that they now come with has terrible range, this will come in handy! Thank you!
You're welcome! Call us if you need extra with picking up right controller 562-425-9000 10am-7pm PST
I have a hpi savage xs flux but it won't do anything I got the same reciever and controler you guys have but idk what's wrong
Do you still have steering? or nothing moves at all? Did you calibrate ESC?
Great video I just upgraded to a 6 channel receiver an I used ch 3 for the lights but they don't change through the 3 settings or turn off? Please help
I have an issue to where i turn my car on and it goes on its own. It only goes slow when it goes on its own and it works fine when i use throttle and brake
You gotta a new subscriber!
Thank you, welcome aboard!
Excellent, informative videos. I would like to pick your brain if i may. I have a Arrma Granite 3s BLX. I bought used and am starting to perform necessary maintenance to it. It has the SLT3 Transmitter and SR315 Receiver. The truck runs great but only has a 75 foot diameter control range before it shuts down. I can get running again as I walk towards it. The antenna seems to be ok but what do I know. Before I purchase a new receiver I was wondering if it could be something in the ESC like a range fail safe and if there was a way to trouble shoot or reprogram. Thanks.......
How do you ground a portable dc power source.
Simple, easy and well explained,
awesome video. You guys rock !
You guys are awesome!!! Love how you explain everything plainly!!! I do have a Question… so I replaced my servo and horn today on my Arrma Typhon 3s but when I turned on my Tactic transmitter, there was no communication with my receiver. I shouldn’t have to bind it, should I? Any tips?
I am going to upgrade my rustler, because it has a 27 MHz receiver. Can I just put a 2.4 GHz receiver in without having to do anything else? With that receiver comes a transmitter.
Yes, you may upgrade your radio/receiver, without doing anything else...
What am I missing? All the comments say great video. How about how to finish setting up the servos and esc?
Why didnt you run that antenna Mr super easy?
Thanks guys! I have a crawler I’m trying to resurrect. Needs new receiver for replacement transmitter. But the existing receiver looks way different from the new one. I have a Tactic ttx300. The receiver is really tiny and cased in plastic. The existing one is like a circuit board about half the size of a playing card with stuff soldered to it.
Can I swap this for the replacement? If so, any tips?
Amazing video new to the RC world upgrading my rc and I find this video thank u so much but have few questions can u run a two speed motor on it as well and winch and light are is there a receiver that does all that for me
No, there are no 2-speed transmissions for electric Kyosho, but you can get a little winch and lights if you would like them
Thank you guys just built a Tamiya TT-02
The paper sheet 6CH Reciver ONLY buys this item, can other remote control be able to control it?
what do you do if you want to change the reciever but it's a all in one esc ??
Hello!!!! I really like the video how its explain !! I wish if you guys can make a video how to install the cooling fan of wltoys 12324 pls!!!
Thanks for your comment, we'll see what we can do!
Hi my reciver burnt out an melted the red and white wire and also the antenna not sure what to do can you help does it mean I need a new speed control as well ?
Not necessarily, if your ESC still works then just change that burned receiver
Can you do this to a Walmart RC car preferably the fast and furious rx7
You can install aftermarket Remote control on any car.
does anybody know is it possible to run a cooling fan & servo in the same port using a Y connector ? help
I have a old tyko fast fraxxx does this apply to it as well missing controller ? I want to add a new receiver and controller?.. wondering if the radiolink combos will work for me?
When I change my factory ESC & replace it with an upgraded version, will my factory controller still pair up with the new ESC or do I need to get a different controller?
Yes, if you change just the ESC
@@Rcstreetshop thanks!.... After more research, I now noticed the piece of the puzzle i was missing lol. I was confused because my stock ESC has the receiver built in. So if I do choose to change it, I will need to get a new controller & receiver. I thought all ESC had receivers built in 😄
Hi! Will in be able to swap the receiver and transmitter in my Kyosho Fazer Mk2 Mercedes GT3? I need a receiver with more channels to instal lights and sirens for my car. Thanks!
@@alexnava8729 Hi, as long as your car has a receiver that is not built into the ESC, you can swap it out & replace it with any new controller. New controllers will typically come with a new receiver. I can recommend you the Radiolink RC4GS controller, it's what I use on my cars. 4 channels, tons of tunability & 1200 ft range. I bought mine for like $60, that controller with receiver. It also has a built-in gyro sensor that can be tuned, enabled or disabled. If your using the car as a drift car, the gyro sensor function can be extremely useful for you.
@@alexnava8729
Here's a link to the controller i was mentioning :
www.amazon.com/dp/B07DPMVVKN/ref=cm_sw_r_cp_apa_i_9T3.FbDWDSF91?_encoding=UTF8&psc=1
Good info but the audio recording seems to be too high and muffled. Thanks guys!
Why vant mine go backwards after binding?
What if your new reciever does not have the groove to receive the plug with the ridge
I know I'm late, but can you do this on the Electrix RC 2wd Ruckus? (The orange one) I don't exactly know how to.
Principle is the same for any RC truck
Alright, thank you for responding
Anytime! 👍👍👍
Great instructional/tutorial! You guys open during the pandemic?
how Dow you put now receiver in Eagle 3 RC buggy
Guys I need help please. I have team associated rc 10 t4.1 it stopped working. It powers on but theres no wheel movement. Steering or back wheels. How do I remove the antenna so I can install a new receiver ?
There is a small grab screw holding antenna tubing in place (it sits right next to it in antenna housing). Just unscrew this little guy, pull out antenna tubing and you're done with antenna.
Got it.thank you !! Seriously. Smh lol... how do I bind it. I see the remote and receiver has a small red button
How hard is it to replace a controller? For instance if I had a rc car, but no controller, how do I replace it?
Well you would need to remove the receiver and find one that would match your controller and reinstall
Hello, I have a question... if my remote control stopped working because of battery corrosion, do I have to replace the controller and the receiver? Or just the controller?
Hello, I do not quite understand why changing any electronics at all if you battery got corroded? Battery is just a power source. Change to a new one and you should be good.
RC Street Shop what happened was I left the batteries in my controller so the batteries corroded the controller and made it stop working. I still have the receiver in my rc car. But my question is do I have to buy a new receiver as well as a new controller? Or am I able to just buy a new controller and connect it to my old receiver?
Normally when you buy a controller it comes with receiver, unless you buy used (eBay, craigslist etc).
Unboxing transmitter 90700G turbo racing in waiting for his vidio
I never use Doubleside tape and all my receiver are in waterproof boxes
receiver of my rc car is damaged and my rc car has 2 motors having 2 wires(one motor for forward and backward movement and the other for left and right steering) . how to fit a new receiver in those motors using a transmitter like flysky fi6 or something similar to it
Hi guys, I know this is an oldier Video and I don't know if you even still monitor but I have a question in this realm. I recently picked up an original Tamiya BlackFoot from a friend of mine it has the original servo controlled speed controller in it and I am trying to connect a radio that I already own to it. the radio is a 7 channel (not gonna stay in the truck) hobby porter HP-007. I think I need to power the receiver because there is a wire coming from the on/off switch that I think connects to the receiver. the problem is that I don't know where to plug in the power connector because there is nothing indicating where the battery should go, each port is marked with a channel number but NO batt connector. any help or suggestions would be appreciated.
I'm just trying to get the truck running for my buddies daughter for her birthday :) gonna get a 2 or 3 channel radio for it once it know it runs BTW I already reached out to hobby porter too But I'm kinda impatient LOL.
What if you have a second servo for 4 wheel steer how do I plug it all in
Guys I need your help. When I turn off the remote control the propeller turns on at full throttle! Causing me to disconnect the battery immediately. Why does this happen?
Most likely you may turn it off. See if your ESC has any safety features or fail-safe turned on.
What about a 3 in 1 esc/receiver?do that next
You guys need to watch a how to install a good 🎤. LOL Thanks for the video.
i have the XTR 02 i need help pls.
Typically how much of the receiver antenna wire needs to be exposed? I have a Losi Mini Baja and want to have the antenna wire not sticking up through the body.
My radio is the Spektrum STX3
This is what I'm here for myself. What I've found out is that there is an exposed bit at the end of the wire and that is what's important. You want that at the top so by pulling all the excess through and hanging the wire down is actually bad. You want that part at the top of the tube. Leave the slack inside the recievers box.
Hey Guys really helpful! have a STX 2 in my new Kraton and it almost broke both my legs last night. There was much Crying and letting of Blood. So it's going or I smash my Kraton. I have an extra tactic 300 & 326 so time to use them. I'm really disappointed that Horizon went down this road. Maybe they'll fix their error with future models, otherwise I may be looking at other Brands. Pretty loyal to Arrma but not going to waste money. have a good one.
Stay safe there, we hope you recover in no time!
How do you connect that to your motors?
What do you mean? and what motor do you have?
What's channel 3 and 4? I have 4 plugs
It depends on the radio. With car radios first two channels are steering and throttle, and remaining are auxiliary channels (switches, telemetry etc)
my car isnt steering but when i use the st.trim it works, throttle works too
i think my transmiter's wheel is defective
What do you mean by "isn't steering"? no input at all? or its not linear?
no input at all
Quite often the electronic component (potentiometer) on your controllers' steering goes out. Sometimes by itself, but mostly because of mechanical damage. If there is no input, then this is most likely what have happened. Unfortunately the only way to fix it, is to replace it.
Thanks
Hi there, Need help and assistance...for my Tamiya plasma edge i lost the transmitter { controller } which was of 27mhz with receiver same frequency 27 mhz .. Is it possible to change or.can i replace a new receiver of 2.4 ghz with new Transmitter, ESC is Tamiya TEU-101-bk .and its good ...so kindly suggest me whether 2.4ghz Transmitter and receiver would be compatible with this ECS .....
Yes, 2,4Ghz is going to be compatible, it provides the same signal for servos and ESC as your old 27Mhz receiver
@@Rcstreetshop previously it was a 2 ch can i use 3 ch receiver ...or it should be 2 ch only
And do the operating range will increase with a 2.4 ghz transmitter and receiver kindly reply and thanks a lot for your support ....
Yes, for both. It is going to be a longer range and you may use 3ch receiver.
Thanks a lot for you assistance and giving a helping suggestion
how do u bind the transmitter and receiver lads?
Hold the bind button on the receiver, turn it on and while it blinks, turn on your controller. Give it a second and it should bind.
RC Street Shop I do this but it doesn't bind
Omg the audio!
I know I’m late but after I plugged it in and my servo automatically turned right help
Check all trim settings. Recenter the servo arm of it's not properly mounted and centered to the servo gears. If it continues, and only turns that way with power to the radio it's in the settings. If the car sits straight with the radio off and cuts when power to the radio comes on keep checking your trim and channel setting.
I all ready fixed it by removing the servo horn and making the tires straight then I remounted it
Thanks though
Thanks!
how do I put the receiver back in place on the rc?
miguel salazar double sided tape
Nice camera and video! But a potato mic
hawktuah install radio
Can u do traxxas plz
We did th-cam.com/users/edit?o=U&video_id=vuux-xlNOYI
That audio though🤕
We love your avatar mate!
Now do it with a esc
Wow! A little off the beaten path for just a minute...just lookin at the size of your fingers...makes me want to order a Sausage sandwich!
do you know what happens, when you water gremlins after midnight?...be careful with that sandwich :)
RC Street Shop hahaha!
oh god
nice! just work on your audio editing.
For the love of god turn your audio levels down!
Will do, thanks Newie
Buy a new mic guys
Gay intro🤣🤣🤣